| LIGO-Number |
Title |
Author(s) |
Topic(s) |
Last Updated |
| D0900492-v5 |
aLIGO Systems, BSC3-L1 Top Level Chamber Assembly |
Ignacio Romero |
System Engineering
Final Design
|
12 Jul 2012 |
| D0900428-v8 |
aLIGO Systems, LBSC2-L1 Top Level Chamber Assembly |
Eduardo Sanchez et al. |
Final Design
System Engineering
|
17 Apr 2025 |
| D0900442-v7 |
aLIGO Systems, BSC1-L1 Top Level Chamber Assembly |
Ignacio Romero et al. |
System Engineering
Final Design
|
17 Apr 2025 |
| D0900471-v5 |
aLIGO Systems, BSC4-L1 Top Level Chamber Assembly |
Ignacio Romero |
Final Design
System Engineering
|
23 Jan 2014 |
| D0900506-v6 |
aLIGO Systems BSC5-L1, Top Level Chamber Assembly |
Ignacio Romero |
Final Design
System Engineering
|
11 Jun 2018 |
| D0901154-v4 |
aLIGO Systems, WBSC10-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
11 Apr 2013 |
| D0901137-v5 |
aLIGO Systems, BSC1-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Apr 2025 |
| D0901146-v5 |
aLIGO Systems, BSC3-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Apr 2025 |
| D0901075-v3 |
AdLIGO SEI Bulk Trim Masses |
Stephany Foley et al. |
Final Design
Seismic Isolation
|
20 Nov 2009 |
| E960022-v24 |
Vacuum Compatibility, Cleaning Methods and Qualification Procedures |
Dennis Coyne |
Fabrication
Cleaning
Vacuum
|
11 Mar 2016 |
| D1002704-v8 |
Rack and Cable Tray Layout_LVEA_H1 |
Dennis Coyne et al. |
Observatory Facilities
System Engineering
|
10 Mar 2025 |
| D1000228-v8 |
D25M to 4x uD9F In-vac "Quadrapus" CUSTOM CABLE V25N-8-5-8-5-v8 (28AWG) |
Rich Abbott et al. |
Sensing and Control
Fabrication
|
26 Feb 2025 |
| D1000225-v6 |
CUSTOM CABLE V25A-TBD (Various Lengths to be determined at manuf.) |
Benjamin Abbott et al. |
Sensing and Control
Fabrication
|
02 May 2012 |
| D1001518-v6 |
Cable Assy, Upper Ring Heater Segment to Lower Quad Terminal Block |
Mindy Jacobson et al. |
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
15 Nov 2010 |
| D1001519-v7 |
Cable Assy, Lower Ring Heater Segment |
Mindy Jacobson et al. |
Final Design
Fabrication
Assembly
Vacuum
Auxiliary Optics
Cleaning
|
30 Aug 2012 |
| D1001520-v4 |
Cable Assy, Lower Quad Terminal Block to Upper Quad Terminal Block |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Fabrication
Final Design
|
03 Dec 2010 |
| D1001521-v5 |
Cable Assy, Terminal Block to Upper Quad |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Fabrication
|
07 Dec 2010 |
| D1000237-v7 |
CUSTOM CABLE V25AB-36 |
Rich Abbott et al. |
Sensing and Control
Fabrication
|
24 Jul 2012 |
| D1000238-v4 |
CUSTOM CABLE V25AC-36 v4 |
Rich Abbott et al. |
Sensing and Control
Fabrication
|
12 Oct 2011 |
| D1000568-v8 |
CUSTOM CABLE V25J-143 v8 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
02 Jul 2012 |
| D1000921-v7 |
CUSTOM CABLE V25C-143_v7 |
Rich Abbott et al. |
Sensing and Control
Fabrication
|
02 Jul 2012 |
| D1000223-v7 |
CUSTOM CABLE SPECIFICATION V25B-216 |
Rich Abbott et al. |
Sensing and Control
Fabrication
|
23 Jul 2012 |
| D1000220-v7 |
CUSTOM CABLE V25A-40 |
Emery Brown et al. |
Fabrication
Sensing and Control
Seismic Isolation
|
01 May 2012 |
| D1000231-v6 |
CUSTOM CABLE V25T-36 v6 |
Rich Abbott et al. |
Fabrication
Sensing and Control
|
06 Jun 2012 |
| D1000233-v2 |
CUSTOM CABLE V25W |
Emery Brown |
Sensing and Control
Fabrication
|
21 Sep 2011 |
| D1000224-v4 |
CUSTOM CABLE V25D - v4 |
Benjamin Abbott et al. |
Fabrication
Sensing and Control
|
03 May 2012 |
| E0900480-v6 |
FTIR Testing to Qualify Parts for LIGO UHV Service |
Dennis Coyne |
Vacuum
Fabrication
|
20 Feb 2025 |
| M1000066-v30 |
LIGO Data Management Plan |
Stuart Anderson et al. |
NSF
Policies
Data and Computing
|
12 Feb 2025 |
| E970129-v1 |
Material, Process, Handling, and Shipping Specification for Welding Diaphragm Bellows |
Stephany Foley |
Seismic Isolation
Fabrication
|
03 Sep 2009 |
| E2000499-v5 |
Modifications to the Beckhoff chassis |
Daniel Sigg |
State Control and Monitoring
|
30 Jan 2025 |
| C2500022-x0 |
Project Management |
Brian O'Reilly |
System Engineering
Project Controls
LIGO-India
Observatory Facilities
|
17 Jan 2025 |
| E1200381-x0 |
aLIGO, Slow Controls, EtherCAT Software |
Daniel Sigg |
State Control and Monitoring
|
16 Jan 2025 |
| E960050-v12 |
LIGO Vacuum Compatible Materials List |
Dennis Coyne |
Final Design
Fabrication
Vacuum
|
07 Nov 2013 |
| D090438-v1 |
ADV LIGO, SUS, THIS, RINGHEATER ATTACHMENT PIECE, QUAD N-PTYPE LS |
Joe ODell |
Suspensions
|
14 Aug 2009 |
| D0900004-v1 |
PEEK Cable Clamp (Guide), HAM 1/4-20 UHV Compatible |
Charles Osthelder |
Data Acquisition System
|
18 Dec 2024 |
| E1101144-v4 |
EtherCAT IP Network Addresses |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2021 |
| D040339-x0 |
TCS Interface Document |
Christopher Guido et al. |
Document Migration
Auxiliary Optics
|
15 Oct 2009 |
| E090003-v1 |
Timing System Document Map Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
26 Nov 2024 |
| D1001895-v7 |
aLIGO TCS Ring Heater Assembly, Lower Segment |
Giacomo Ciani et al. |
Fabrication
Auxiliary Optics
Vacuum
|
19 Jun 2013 |
| D1001715-v3 |
aLIGO, DAS, IO EXPANSION CHASSIS, MECHANICAL ASSY |
Emery Brown |
Fabrication
Data Acquisition System
|
11 Nov 2024 |
| D1001838-v6 |
aLIGO TCS Ring Heater Assembly, Upper Segment |
Mindy Jacobson et al. |
Fabrication
Auxiliary Optics
Vacuum
|
04 Jan 2013 |
| D1002545-v3 |
aLIGO TCS Simplified Ring Heater Element Standoff |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
|
07 Mar 2011 |
| T080135-v11 |
AdvLigo CDS Realtime Code Generator (RCG) Application Developer s Guide |
Rolf Bork et al. |
Data Acquisition System
|
01 Nov 2024 |
| D1000182-v3 |
IQ FET Demodulator Front Panel |
Daniel Sigg |
Sensing and Control
|
28 Oct 2024 |
| E1200202-x0 |
aLIGO, Slow Controls, EtherCAT Systems |
Daniel Sigg |
State Control and Monitoring
|
14 Oct 2024 |
| E1800220-v1 |
XML Schema for Altium-TwinCAT workflow |
Daniel Sigg et al. |
State Control and Monitoring
|
10 Oct 2024 |
| D0901318-v4 |
GS-13, Flexure, Bottom |
Sam Barnum et al. |
Final Design
Seismic Isolation
|
08 Oct 2024 |
| D0901319-v4 |
GS-13, Flexure, Top |
Sam Barnum et al. |
Seismic Isolation
Final Design
|
08 Oct 2024 |
| E0900027-v1 |
LIGO Project Modifications to the GS-13 |
Brian Lantz |
Seismic Isolation
Final Design
|
08 Oct 2024 |
| E1100530-v10 |
PSL/IO/TCS Beckhoff (Slow Controls) Chassis Cabling/Wiring Diagram |
Jose Puente et al. |
Laser Systems
Installation
State Control and Monitoring
|
16 Aug 2024 |
| D1100683-v11 |
EtherCAT System Diagram |
Daniel Sigg |
State Control and Monitoring
|
06 Aug 2024 |
| E1200374-x0 |
aLIGO, Slow Controls, Chassis, Corner 4 |
Daniel Sigg |
State Control and Monitoring
|
06 Aug 2024 |
| E1200205-x0 |
aLIGO, Slow Controls, Concentrators |
Daniel Sigg |
State Control and Monitoring
|
05 Aug 2024 |
| D1100692-v1 |
Slow controls concentrator interface: demodulator |
Daniel Sigg |
Sensing and Control
|
25 Jul 2024 |
| D060218-v2 |
BOSEM |
Betsy Weaver et al. |
Suspensions
Preliminary Design
|
28 Jul 2020 |
| E0900023-v14 |
PROCESS FOR MANUFACTURING CANTILEVER SPRING BLADES FOR AdvLIGO |
Douglas Cook et al. |
Basic R&D
System Engineering
|
27 Oct 2021 |
| D070157-v1 |
eLIGO OMC InGaAs Q3000 QPD Mounting Plate and Connector |
Charles Osthelder |
Data Acquisition System
|
30 May 2024 |
| D1002602-v5 |
aLIGO ISC InGaAs-Q3000 QPD Flexible Circuit Board |
Rich Abbott |
Fabrication
Sensing and Control
|
14 May 2024 |
| D071165-v2 |
Sensor Target |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D0900605-v5 |
Low Noise Voltage Controlled Oscillator (VCO) Assembly |
Daniel Sigg |
Sensing and Control
|
10 Apr 2024 |
| T2300288-v1 |
Implementing Nonlinear Control in a Classical Experiment to Reduce Measurement Noise |
Andrei Diaconu et al. |
Machine Learning
State Control and Monitoring
|
03 Apr 2024 |
| F0900007-v1 |
Document Change Notice (DCN) template. |
Dennis Coyne |
System Engineering
|
15 Mar 2024 |
| E0900041-v6 |
Advanced LIGO Input Test Mass Coating Specification |
Gregg Harry |
Core Optics
Final Design
Requirements
|
12 Mar 2024 |
| E0900068-v5 |
Advanced LIGO End Test Mass (ETM) Coating Specification |
Rand Dannenberg |
Final Design
Core Optics
|
12 Mar 2024 |
| E080031-v1 |
MIRROR BLANK MATERIAL, AdLIGO ITM MIRROR |
GariLynn Billingsley et al. |
Core Optics
Final Design
Fabrication
|
11 Mar 2024 |
| E080047-v1 |
Mirror Blank Material, AdLIGO ETM Mirror Specification |
GariLynn Billingsley et al. |
Core Optics
Final Design
Fabrication
|
11 Mar 2024 |
| D0900609-v3 |
Low Noise Voltage Controlled Oscillator: Oscillator Source |
Daniel Sigg |
Sensing and Control
|
06 Mar 2024 |
| E030350-v5 |
Configuration Control & Drawing Requirements |
Calum Torrie et al. |
System Engineering
|
06 Mar 2024 |
| E1200225-v8 |
Coding Standard for TwinCAT Slow Controls Software |
Daniel Sigg |
State Control and Monitoring
|
05 Mar 2024 |
| E2300329-v1 |
Squeezer Controls Chassis 5 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
01 Mar 2024 |
| D1001679-v6 |
aLIGO TCS Upper Monolithic Ring Heater Shield |
Mindy Jacobson et al. |
Fabrication
Vacuum
Auxiliary Optics
|
02 Jun 2023 |
| E2100047-v3 |
Squeezer Controls Chassis 4 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| E1600386-v5 |
Squeezer Controls Chassis 3 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| D1600509-v5 |
EtherCAT Squeezer Chassis 3 |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| E1600384-v4 |
Squeezer Controls Chassis 2 Wiring Diagram |
Daniel Sigg et al. |
State Control and Monitoring
|
15 Nov 2023 |
| D1600507-v2 |
EtherCAT Squeezer Chassis 2 |
Daniel Sigg |
State Control and Monitoring
|
15 Nov 2023 |
| D070441-v6 |
HLTS Prism Breakoff, Lower Wire, Optic |
Calum Torrie et al. |
Final Design
Suspensions
|
14 Nov 2023 |
| D0810033-v4 |
HSTS LOWER MASS PRIMARY PRISM |
Calum Torrie |
Final Design
Suspensions
|
14 Nov 2023 |
| D1001680-v5 |
aLIGO TCS Lower Monolithic Ring Heater Shield |
Mindy Jacobson et al. |
Fabrication
Auxiliary Optics
Vacuum
|
04 Mar 2011 |
| T2300147-v2 |
LIGO Seismic State Characterization using Machine Learning Techniques |
Isaac Kelly et al. |
Machine Learning
State Control and Monitoring
|
30 Oct 2023 |
| D040469-v1 |
RF Summing Box |
Daniel Sigg |
Laser Systems
|
24 Oct 2023 |
| E0900364-v11 |
Metal components intended for use in the Adv LIGO Vacuum System |
Dennis Coyne et al. |
System Engineering
|
05 Oct 2023 |
| D2300328-v1 |
Auxiliary Signals Concentrator 11 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| D2300327-v1 |
Auxiliary Signals Concentrator 11 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| E2300331-v1 |
Test Procedure for Auxiliary Signals Concentrator 11 |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| D2300326-v1 |
Auxiliary Signals Concentrator 11 |
Daniel Sigg |
State Control and Monitoring
|
05 Oct 2023 |
| E080138-v2 |
Coated Substrate, ALIGO PRE-MODE MATCHING TELESCOPE MIRROR #2 |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
05 Oct 2023 |
| D2300323-v1 |
EtherCAT Squeezer Chassis 5 |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D2300325-v1 |
Squeezer Controls Chassis 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D2300324-v1 |
Squeezer Controls Chassis 5 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2023 |
| D1101847-v5 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMX, L1 |
Aidan Brooks et al. |
Final Design
Fabrication
Preliminary Design
Auxiliary Optics
System Engineering
Integration
Vacuum
|
23 Oct 2019 |
| D1101846-v1 |
aLIGO TCS HWS Optics Assembly In Vacuum, L1 HAM4 |
Aidan Brooks et al. |
Auxiliary Optics
System Engineering
Integration
Vacuum
Preliminary Design
Fabrication
Final Design
|
24 May 2012 |
| D1101848-v1 |
aLIGO TCS HWS OPTO MECHANICAL LAYOUT, ITMY, L1 |
Aidan Brooks et al. |
Final Design
Fabrication
Preliminary Design
Integration
Vacuum
System Engineering
Auxiliary Optics
|
03 May 2012 |
| D080751-v4 |
Advanced LIGO, Suspension, ETM/ITM Test Mass, Production ear |
Marielle van Veggel |
Suspensions
Final Design
|
28 Sep 2023 |
| T1600605-v10 |
List of SQZ Photodetectors in Advanced LIGO |
Lisa Barsotti et al. |
Squeezer
|
22 Sep 2023 |
| E2300330-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 11 |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| E2300328-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 5 |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| E1200204-x0 |
aLIGO, Slow Controls, EtherCAT Chassis |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2023 |
| F0900008-x0 |
LIGO Technical Note Template |
Dennis Coyne |
System Engineering
|
11 Feb 2009 |
| T040111-v1 |
Galling Tendencies and Particles Produced by Ultra Clean Screw Threads |
Michael Gerfen et al. |
Basic R&D
System Engineering
|
07 Sep 2023 |
| D047823-v5 |
D047823- L4C Vacuum Chamber top |
Fabrice Matichard |
Seismic Isolation
Final Design
|
30 Apr 2010 |
| D047822-v5 |
D047822 L4C chamber baseplate |
Fabrice Matichard |
Seismic Isolation
Final Design
|
30 Apr 2010 |
| E050262-v1 |
Test procedure for the Timing Slave Board Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
13 Mar 2009 |
| D0901083-v12 |
aLIGO Systems, HAM2-H1 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
22 Oct 2019 |
| D071462-v2 |
Asm, Position Sensor Target Face |
Andy Stein et al. |
Final Design
Seismic Isolation
|
03 Aug 2023 |
| D070101-v4 |
16 bit DAC AI Rear Interface Board |
Jay Heefner |
Other data analysis
Data and Computing
|
03 Aug 2023 |
| D060386-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MOUNT BLOCK, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| P080112-v6 |
Searches for Gravitational Waves from Known Pulsars with Science Run 5 LIGO Data |
Matthew Pitkin et al. |
Detector
Continuous Wave
|
12 Jul 2023 |
| D1301017-v1 |
Arm Cavity Baffle (ACB) Photodiode (PD) Amplifier (preamp) |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
06 Jul 2023 |
| D1002544-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Right |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Final Design
Fabrication
|
31 Jan 2011 |
| D1002543-v4 |
aLIGO TCS Simplified Ring Heater Element Connector, Left |
Mindy Jacobson |
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
31 Jan 2011 |
| D060546-v1 |
Impact Absorber for Glass Stops, Earthquake Stop |
Derek Bridges |
Suspensions
Preliminary Design
|
15 May 2009 |
| D070100-v1 |
ADC AA Interface |
Jay Heefner |
Data and Computing
|
16 Jul 2010 |
| E2200004-v2 |
Filter Cavity End Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
08 Dec 2022 |
| D2200006-v2 |
EtherCAT Filter Cavity End |
Daniel Sigg |
State Control and Monitoring
|
08 Dec 2022 |
| T970130-v4 |
Specification of a Common Data Frame Format for Interferometric Gravitational Wave Detectors (IGWD) |
Kent Blackburn et al. |
Data analysis software
Data and Computing
|
22 Nov 2022 |
| D070081-v6 |
AdL AA and AI Filter Board (65 kHz) |
Jay Heefner |
Data Acquisition System
|
11 Nov 2022 |
| D1000181-v3 |
IQ FET Demodulator Assembly |
Daniel Sigg |
Sensing and Control
|
07 Nov 2022 |
| E1100114-v2 |
Advanced LIGO IQ RF Demodulator Test Procedure |
Rich Abbott et al. |
Sensing and Control
|
03 Jun 2014 |
| D1201349-v2 |
Auxiliary Signals Concentrator 4 |
Daniel Sigg |
State Control and Monitoring
|
21 Oct 2022 |
| E0900394-v7 |
aLIGO optic container shipping and storage procedure |
GariLynn Billingsley et al. |
Core Optics
|
20 Sep 2022 |
| D0901301-v13 |
BSC ISI HEPI SEI System Wiring Schematic Diagram |
Benjamin Abbott |
Seismic Isolation
|
08 Sep 2022 |
| D1800185-v3 |
TwinCAT Mapping H1EcatC1 |
Daniel Sigg |
State Control and Monitoring
|
31 Aug 2022 |
| D070071-v1 |
Chassis Timing Interface |
Daniel Sigg |
Data Acquisition System
|
05 Aug 2022 |
| E080512-v6 |
E080512_ETM_Polishing_Specification |
Mick Flanigan |
Core Optics
Final Design
|
01 Aug 2022 |
| D1201350-v2 |
Auxiliary Signals Concentrator 4 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
19 Jul 2022 |
| E0900347-v9 |
ETM Telescope Primary Parabolic Mirror, ADLIGO |
Michael Smith et al. |
Final Design
Auxiliary Optics
|
08 Feb 2012 |
| D0902146-v5 |
ASSEMBLY, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
12 Apr 2022 |
| T2100160-v1 |
Optimal State-Space Estimation of Interferometer Mode-Matching |
Mark Nguyen et al. |
State Control and Monitoring
Core Optics
|
23 Mar 2022 |
| E1900185-v4 |
TwinCAT EPICS IOC User Guide |
Daniel Sigg |
State Control and Monitoring
|
21 Feb 2022 |
| E2200056-v1 |
XML Schema for tcIoc Substitution File |
Daniel Sigg |
State Control and Monitoring
|
15 Feb 2022 |
| D071100-v3 |
Spring |
Andy Stein et al. |
Seismic Isolation
Final Design
|
03 Feb 2022 |
| E1200680-v6 |
TwinCAT Library for DC Power |
Alexa N Staley et al. |
State Control and Monitoring
|
26 Jan 2022 |
| D1500088-v2 |
Corner Station Controls Chassis 6 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
14 Jan 2022 |
| E1200358-x0 |
aLIGO, Slow Controls, Concentrators, Modular Signals Breakout |
Daniel Sigg |
State Control and Monitoring
|
13 Jan 2022 |
| D2200019-v1 |
D-Sub 25 Breakout |
Daniel Sigg |
State Control and Monitoring
|
13 Jan 2022 |
| D2200008-v1 |
Filter Cavity End Controls Chassis Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200007-v1 |
Filter Cavity End Controls Chassis Front Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200008-v1 |
Test Procedure for Auxiliary Signals Concentrator 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200007-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200010-v1 |
Auxiliary Signals Concentrator 10 |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200011-v1 |
Auxiliary Signals Concentrator 10 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| D2200012-v1 |
Auxiliary Signals Concentrator 10 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jan 2022 |
| E2200003-x0 |
aLIGO, Slow Controls, Chassis, Filter Cavity End |
Daniel Sigg |
State Control and Monitoring
|
05 Jan 2022 |
| E1200379-x0 |
aLIGO, Slow Controls, Chassis, Adapter Modules |
Daniel Sigg |
State Control and Monitoring
|
05 Jan 2022 |
| E1100018-v7 |
RF Amplifier Count |
Daniel Sigg |
Sensing and Control
|
20 Dec 2021 |
| D071120-v2 |
Actuator Magnet Mount |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071463-v2 |
Asm, Position Sensor Target |
Andy Stein et al. |
Final Design
Seismic Isolation
|
26 Oct 2021 |
| D071497-v2 |
Asm, Fixture, Actuator Set-Up |
Andy Stein et al. |
Final Design
Seismic Isolation
|
26 Oct 2021 |
| D071424-v2 |
Asm, Keel |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071470-v2 |
Asm, GS-13 with Fixtures |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071464-v2 |
Asm, Position Sensor |
Andy Stein et al. |
Final Design
Seismic Isolation
|
26 Oct 2021 |
| D071431-v2 |
Asm, Flexure |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071430-v2 |
Asm, Spring and Flexure |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071427-v2 |
Asm, Outer Wall, Small Panel |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071412-v2 |
Asm, Stage 0 Stiffener |
Andy Stein et al. |
Final Design
Seismic Isolation
|
26 Oct 2021 |
| D071442-v2 |
Asm, Actuator |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D071450-v2 |
Asm, HAM-ISI Locker |
Andy Stein et al. |
Seismic Isolation
Final Design
|
26 Oct 2021 |
| D1102294-v4 |
EtherCAT IP Network Diagram |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2021 |
| D080177-v4 |
Compensation Plate ESD Pattern Drawing |
Kurt Buckland et al. |
Core Optics
Preliminary Design
Sensing and Control
|
08 Oct 2021 |
| D972610-v1 |
HAM Support Tube |
Stephany Foley |
Seismic Isolation
Final Design
|
10 Sep 2009 |
| D1101114-v8 |
PSL/IO/TCS Chassis |
Jose Puente |
State Control and Monitoring
Installation
Laser Systems
Input Optics
|
01 Sep 2021 |
| D1700185-v1 |
Squeezer Satellite Chassis Assembly (OBSOLETE) |
Rich Abbott et al. |
State Control and Monitoring
|
29 Jul 2021 |
| D080658-v6 |
aLIGO, COC End Test Mass (ETM) Substrate (D080658_ALIGO COC_ETM_SUBSTRATE) |
Calum Torrie |
Core Optics
Final Design
|
14 Jul 2021 |
| D080657-v7 |
aLIGO, COC Input Test Mass (ITM) Substrate (D080657 ALIGO COC ITM SUBSTRATE) |
Calum Torrie |
Final Design
Core Optics
|
14 Jul 2021 |
| E080511-v6 |
ITM Polish Specification |
Mick Flanigan |
Final Design
Core Optics
|
14 Jul 2021 |
| T1100068-v23 |
Photon Calibrator Preliminary/Final Design Document |
Jonathan Berliner et al. |
Requirements
Preliminary Design
Calibration
Assembly
Upgrades
Conceptual Design
Auxiliary Optics
Basic R&D
Laser Systems
Detector Characterization
|
06 Jul 2021 |
| T0900023-v2 |
(OMC) DC (DCPD) readout (Power) Normalization (Linearization) |
Sam Waldman |
Sensing and Control
Commissioning
|
25 Jun 2021 |
| D2000017-v2 |
PSL/IO/TCS Chassis Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
17 Jun 2021 |
| D972611-v1 |
LIGO HAM Expansion Bellows |
Stephany Foley |
Final Design
Seismic Isolation
|
01 Sep 2009 |
| T0900140-v1 |
AdL Triple Acquisition Driver Board Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
19 Aug 2009 |
| D1001372-v4 |
Timing Comparator Rear Panel |
Ilya Belopolski |
Data Acquisition System
|
06 May 2021 |
| T1100613-v3 |
SEI System Real-Time Band-Limited RMS Filter (ISI Performance Matrix, Matrices) |
Christopher Kucharczyk et al. |
Data and Computing
Data Analysis
|
04 May 2021 |
| E1100274-v5 |
Common Mode Servo Count |
Daniel Sigg |
Sensing and Control
|
28 Apr 2021 |
| T2000294-v4 |
LSC-Virgo Operations White Paper (Summer 2020 edition) |
Nicolas Arnaud et al. |
Data quality / vetoes
Data and Computing
Detector Characterization
Commissioning
Calibration
Computing/archiving
External Collaboration
Astrophysics / Multi-messenger
Operations
|
21 Apr 2021 |
| D0902791-v1 |
Viewport Guard Dust Cover |
Michael Meyer |
Preliminary Design
Vacuum
|
19 Jan 2010 |
| E1100512-v3 |
EtherCAT Module Labels |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2021 |
| E010613-v2 |
Generic Requirements & Standards for Detector Subsystems |
Dennis Coyne |
System Engineering
Final Design
Fabrication
|
24 Feb 2021 |
| D1002209-v2 |
DC Power Extension Cord |
David Kinzel |
System Engineering
|
24 Feb 2021 |
| D2000505-v1 |
Auxiliary Signals Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D1201483-v1 |
Feedthrough panel for EtherCAT TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| E2100070-v1 |
Test Procedure for Auxiliary Signals Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2000506-v1 |
Auxiliary Signals Concentrator 9 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2000507-v1 |
Auxiliary Signals Concentrator 9 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100070-v1 |
EtherCAT panel D-sub 37 for Auxiliary Concentrator 1 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D1900143-v2 |
EtherCAT panel D-sub 37 for AM Modulated AOM Amplifier |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100057-v1 |
EtherCAT panel D-sub 37 for DC PD Concentrator 9 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| E1600385-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 3 |
Daniel Sigg |
State Control and Monitoring
|
12 Feb 2021 |
| D2100054-v1 |
Squeezer Controls Chassis 4 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
11 Feb 2021 |
| D2100055-v1 |
Squeezer Controls Chassis 4 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
11 Feb 2021 |
| D080276-v2 |
aLIGO (US, ISC) 4 Channel Satellite Amplifier Circuit Board (Amp, SatAmp) |
Jay Heefner |
Final Design
Suspensions
|
04 Feb 2021 |
| D1000669-v5 |
TCS Hartmann Sensor Plate |
Jesper Munch et al. |
Conceptual Design
Auxiliary Optics
Fabrication
Final Design
Preliminary Design
|
01 Feb 2021 |
| E2000526-x0 |
aLIGO, Slow Controls, Chassis, Squeezer 4 |
Daniel Sigg |
State Control and Monitoring
|
01 Feb 2021 |
| T990013-x0 |
Diagnostics Test Software |
Daniel Sigg et al. |
Data Acquisition System
Sensing and Control
Document Migration
Data and Computing
|
30 Nov 2010 |
| T1900370-v7 |
Understanding interferometer lock losses with machine learning |
Laurel White et al. |
Commissioning
State Control and Monitoring
|
12 Oct 2020 |
| E1100455-v3 |
EtherCAT 4km Remote Access Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
22 Sep 2020 |
| D1100619-v3 |
EtherCAT 4km Remote Access End |
Daniel Sigg |
Sensing and Control
|
22 Sep 2020 |
| E0900047-v23 |
LIGO Contamination Control Plan |
Betsy Weaver et al. |
Cleaning
Risk Management
Observatory Facilities
|
17 Sep 2020 |
| D970412-v1 |
BSC Overall Assembly, LIGO Vacuum Equipment |
Dennis Coyne |
Fabrication
Vacuum
|
16 Sep 2020 |
| E1200203-x0 |
aLIGO, Slow Controls, EtherCAT Setup and Installation |
Daniel Sigg |
State Control and Monitoring
|
09 Sep 2020 |
| D1001530-v7 |
aLIGO ISC Whitening Board |
Rich Abbott |
Sensing and Control
Conceptual Design
|
03 Aug 2020 |
| E2000252-v1 |
Electronic Data Sheet File for the Anybus X-Gateway AB9000 |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E2000251-x0 |
aLIGO, Slow Controls, EtherCAT Workflow |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E1200224-x0 |
aLIGO, Slow Controls |
Daniel Sigg |
State Control and Monitoring
|
05 May 2020 |
| E080177-v2 |
RGA Test Qualification of components for the LIGO UHV |
Dennis Coyne |
Fabrication
Vacuum
System Engineering
|
15 Apr 2020 |
| P2000107-v6 |
advligorts: The Advanced LIGO Real-Time Digital Control and Data Acquisition System |
Jameson Graef Rollins et al. |
Sensing and Control
Data Acquisition System
Data and Computing
|
31 Mar 2020 |
| T1900280-v1 |
Optimal non-linear control for LIGO interferometers |
Millind Vaddiraju et al. |
Project Controls
|
01 Mar 2020 |
| E0900479-v3 |
Instructions for taking Low Volatility Residue (LVR) Wipe Samples |
Dennis Coyne |
Fabrication
Vacuum
|
28 Feb 2020 |
| D080117-v1 |
Penultimate Mass, ETM Quad |
Russell Jones |
Fabrication
Final Design
Suspensions
|
14 Feb 2020 |
| D1101001-v3 |
aLIGO, high quality, 6" Viewport Flange |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
26 Sep 2011 |
| D0900931-v6 |
gold coating pattern compensation plates (CP) barrel |
Calum Torrie |
Core Optics
System Engineering
|
14 Dec 2009 |
| E1200377-x0 |
aLIGO, Slow Controls, Chassis, PSL/IO/TCS |
Daniel Sigg |
State Control and Monitoring
|
17 Jan 2020 |
| D0900608-v4 |
Voltage Controlled Oscillator: Mounting Plate |
Daniel Sigg |
Sensing and Control
|
21 Dec 2011 |
| E1100267-v1 |
6 inch Vacuum Viewport Window |
Peter Fritschel |
Vacuum
Auxiliary Optics
|
25 Mar 2011 |
| P1900188-v2 |
Optical Cavity Inference Techniques for Low Noise Interferometry |
Jorge Ramirez et al. |
Data and Computing
|
25 Nov 2019 |
| E1200226-v8 |
TwinCAT Library for Low Noise VCO |
Daniel Sigg |
State Control and Monitoring
|
01 Nov 2019 |
| E1700223-v1 |
TwinCAT Library for VCXO |
Daniel Sigg |
State Control and Monitoring
|
01 Nov 2019 |
| E1900164-v2 |
TwinCAT Library for AOM Driver |
Daniel Sigg |
State Control and Monitoring
|
07 Oct 2019 |
| D0900906-v1 |
Earthquake Stop Adjuster and Mount, 2 Inch |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Oct 2019 |
| D040180-v7 |
Common Mode Servo Board |
Daniel Sigg |
Sensing and Control
|
06 Sep 2019 |
| D1101006-v1 |
aLIGO, high quality, non-wedged, 6" Viewport, Optic |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
09 Jun 2011 |
| E1000116-v2 |
Output Faraday Rotator Component Specification |
Michael Smith |
Auxiliary Optics
Final Design
|
23 May 2019 |
| E0900246-v4 |
Coated Substrate, ALIGO Signal Recycling Mirror T=20% |
Rodica Martin |
Core Optics
Input Optics
Fabrication
|
17 May 2019 |
| E0900089-v4 |
Substrate, ALIGO Signal Recycling Mirror (SRM) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Final Design
Input Optics
Core Optics
|
17 May 2019 |
| E0900087-v4 |
Substrate, ALIGO Power Recycling Mirror (PRM) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Input Optics
Final Design
Core Optics
|
17 May 2019 |
| E0900093-v4 |
Substrate, ALIGO Signal Recycling Mirror 2 (SR2) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Final Design
Input Optics
Core Optics
|
17 May 2019 |
| E0900091-v4 |
Substrate, ALIGO Power Recycling Mirror 2 (PR2) for L1 and H1 interferometers - unfolded |
Rodica Martin |
Final Design
Input Optics
Core Optics
|
17 May 2019 |
| E1200632-v6 |
TwinCAT Library for ALS Laser |
Alexa N Staley |
State Control and Monitoring
|
08 May 2019 |
| D1700176-v1 |
Auxiliary Signals Concentrator 7 |
Daniel Sigg |
State Control and Monitoring
|
26 Apr 2019 |
| E1300124-v2 |
TwinCAT Library for Beam Diverter |
Sheila Dwyer et al. |
State Control and Monitoring
|
23 Apr 2019 |
| T000127-v4 |
Core Optics Components (COC) Design Requirements Document (DRD) |
Gregg Harry et al. |
Final Design
Core Optics
|
16 Apr 2019 |
| E1200627-v3 |
TwinCAT Library for Delay Line |
Alexa N Staley |
State Control and Monitoring
|
11 Apr 2019 |
| D047813-v3 |
D047813-- Baseplate, GS-13 Horizontal & Vertical |
Andy Stein |
Final Design
Seismic Isolation
|
11 Apr 2019 |
| D047812-v3 |
D047812- GS-13 Pod Top Mount |
Stephany Foley |
Seismic Isolation
|
11 Apr 2019 |
| T0810012-v3 |
High Reliability Electronics for LIGO |
Rich Abbott |
System Engineering
Risk Management
Requirements
|
14 Mar 2019 |
| T040027-v2 |
Conceptual Design of Beamsplitter Suspension for aLIGO |
Norna Robertson et al. |
Suspensions
Conceptual Design
|
14 Mar 2019 |
| D080373-v3 |
Clamp Asm, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
11 Jan 2011 |
| D0901781-v2 |
Common Mode Servo Assembly |
Daniel Sigg |
Sensing and Control
|
22 Feb 2019 |
| E1300767-v2 |
TwinCAT Library for ALS Frequency |
Daniel Sigg et al. |
State Control and Monitoring
|
10 Jan 2019 |
| T1000543-v2 |
Effect of the end mirror curvature error to the contrast of a Fabry-Perot based Michelson interferometer |
Koji Arai |
Modelling
Core Optics
|
09 Jan 2019 |
| E1000079-v9 |
First Contact Brush and Pour Application Procedure |
Margot Hennig et al. |
System Engineering
Core Optics
|
19 Dec 2018 |
| T1500188-v5 |
Active Wavefront Control Roadmap |
Aidan Brooks et al. |
Sensing and Control
Preliminary Design
Requirements
Conceptual Design
State Control and Monitoring
Basic R&D
Core Optics
Auxiliary Optics
|
30 Nov 2018 |
| E1100273-v3 |
Phase-Frequency Discriminator and Dual Demodulator Count |
Daniel Sigg |
Sensing and Control
|
13 Nov 2018 |
| T0900144-v7 |
Adv. LIGO Arm Length Stabilization Design |
Sam Waldman et al. |
Sensing and Control
Final Design
|
08 Nov 2018 |
| T0900083-v1 |
Modeling Cable Noise in LIGO |
Julian Earl Freed-Brown et al. |
Modelling
Suspensions
Final Design
|
16 Oct 2018 |
| E1800295-v1 |
TwinCAT Library for Squeezer OPO Resonance |
Daniel Sigg |
State Control and Monitoring
|
15 Oct 2018 |
| D070270-v2 |
Locker Sleeve |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| E1700370-v2 |
ECR: Modernizing the EtherCAT Slow Controls System |
Daniel Sigg |
State Control and Monitoring
|
31 Aug 2018 |
| E1100102-v2 |
Test Procedure for Phase-Frequency Discriminator |
Daniel Sigg et al. |
Sensing and Control
|
28 Mar 2011 |
| T070082-v1 |
LIGO I mirror scattering loss by microroughness |
Hiro Yamamoto |
Core Optics
Commissioning
|
06 Apr 2009 |
| E1200369-x0 |
aLIGO, Slow Controls, Chassis, End Remote Access |
Daniel Sigg |
State Control and Monitoring
|
25 Jun 2018 |
| D1100618-v2 |
EtherCAT MSR Corner |
Daniel Sigg |
Sensing and Control
|
25 Jun 2018 |
| E1200367-x0 |
aLIGO, Slow Controls, Chassis, MSR Corner |
Daniel Sigg |
State Control and Monitoring
|
25 Jun 2018 |
| T0900288-v3 |
Advanced LIGO anticipated sensitivity curves OBSOLETE |
David Shoemaker |
Modelling
Detector
|
12 Jun 2018 |
| E1201049-v18 |
EtherCAT Corner Channel Link List |
Patrick Thomas et al. |
State Control and Monitoring
|
10 May 2018 |
| E1700244-v2 |
TwinCAT Library for Motorized Flipper/TTL IO Controller |
Daniel Sigg |
State Control and Monitoring
|
06 Apr 2018 |
| D0900760-v2 |
EOM/AOM Driver |
Daniel Sigg |
Sensing and Control
|
03 Apr 2018 |
| E1700243-v3 |
TwinCAT Library for PZT Driver |
Daniel Sigg |
State Control and Monitoring
|
30 Mar 2018 |
| D060454-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE |
Joe ODell |
Suspensions
|
30 Mar 2018 |
| T1000534-v4 |
COC Ergo-Arm Procedure for lifting large optics |
Margot Hennig |
Core Optics
|
22 Mar 2018 |
| T980024-v1 |
Data Acquisition Daemon (DAQD) Client Server Communication Protocol, Version 11, date 1-09-2002 |
Alexander Ivanov |
Data Acquisition System
Document Migration
|
21 Jan 2011 |
| T1700195-v3 |
Mirror Metrology using Mode Spectroscopy |
Kaustubh Singhi et al. |
Basic R&D
Core Optics
Data analysis software
Data and Computing
|
19 Feb 2018 |
| T1700196-v3 |
Laser Mode Spectroscopy for Mirror Metrology |
Naomi Wharton et al. |
Data and Computing
Basic R&D
Data analysis software
Core Optics
|
19 Feb 2018 |
| T1700198-v1 |
Online Detector Characterization using Neural Networks |
Roxana Popescu et al. |
Sensing and Control
Data and Computing
State Control and Monitoring
Seismic Isolation
Basic R&D
|
19 Feb 2018 |
| D1100326-v2 |
Picomotor Driver Board |
Daniel Sigg |
Sensing and Control
|
13 Feb 2018 |
| T1000504-v2 |
Test Procedure for RF Frequency Doubler |
Daniel Sigg |
Sensing and Control
|
24 May 2011 |
| E1300146-v2 |
TwinCAT Library for TEC Controller |
Sheila Dwyer |
State Control and Monitoring
|
07 Feb 2018 |
| D060353-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, Pen Re Pitch Mass |
Joe ODell |
Suspensions
|
31 Jan 2018 |
| E1600257-v1 |
TwinCAT Library for AS Port Fast Shutter Protection |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2018 |
| E1200359-x0 |
aLIGO, Slow Controls, Controllers, Uniblitz Shutter and AS Port Fast Shutter |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2018 |
| E070078-v2 |
SUBSTRATE, ALIGO MODE CLEANER FLAT MIRROR |
Rodica Martin et al. |
Input Optics
Final Design
|
23 Jan 2018 |
| T1700214-v4 |
The LSC-Virgo White Paper on Gravitational Wave Data Analysis and Astrophysics (2017-2018 edition) |
Peter Shawhan et al. |
Data and Computing
Data quality / vetoes
Data Analysis
Detector Characterization
Compact Binaries
Stochastic
Continuous Wave
Data analysis software
Computing/archiving
Calibration
Astrophysics / Multi-messenger
GW Bursts
Other data analysis
|
20 Dec 2017 |
| E1700129-x0 |
aLIGO, Slow Controls, Controllers, Motorized Flipper/TTL IO |
Daniel Sigg et al. |
State Control and Monitoring
|
03 Nov 2017 |
| D1700395-v1 |
Squeezer 3.125MHz Band Pass Filter Rear Panel Files |
Luis Sanchez |
Data Acquisition System
Squeezer
State Control and Monitoring
|
30 Sep 2017 |
| E1200361-x0 |
aLIGO, Slow Controls, Controllers, Picomotor |
Daniel Sigg |
State Control and Monitoring
|
08 Sep 2017 |
| D1000185-v3 |
IQ FET Demodulator Power Interface |
Daniel Sigg |
Sensing and Control
|
15 Apr 2017 |
| E1100020-v2 |
RF Harmonics Generator Count |
Daniel Sigg |
Sensing and Control
|
13 Apr 2012 |
| E1700131-v1 |
Motorized Flipper/TTL IO Count |
Daniel Sigg |
State Control and Monitoring
|
01 Sep 2017 |
| D1700171-v1 |
Motorized Flipper/TTL IO Assembly |
Daniel Sigg et al. |
State Control and Monitoring
|
28 Aug 2017 |
| G1701594-v1 |
Brief LIGO Controls Overview |
Dennis Coyne |
Sensing and Control
State Control and Monitoring
Detector
|
26 Aug 2017 |
| D1700172-v2 |
Motorized Flipper/TTL IO Front Panel |
Daniel Sigg et al. |
State Control and Monitoring
|
25 Aug 2017 |
| D1700173-v2 |
Motorized Flipper/TTL IO Rear Panel |
Daniel Sigg et al. |
State Control and Monitoring
|
24 Aug 2017 |
| E1201034-x0 |
aLIGO, Slow Controls, Controllers, TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
14 Aug 2017 |
| G1701409-v1 |
Machine learning for lock loss analysis |
Jameson Graef Rollins |
Detector Characterization
State Control and Monitoring
Sensing and Control
|
20 Jul 2017 |
| E1200206-x0 |
aLIGO, Slow Controls, Controllers |
Daniel Sigg |
State Control and Monitoring
|
17 Jul 2017 |
| E1000482-v6 |
RF Source OCXO Count |
Daniel Sigg |
Sensing and Control
|
19 Jun 2017 |
| G1700809-v1 |
What Does Low Frequency Control Look Like in the 2G+ and 3G Era? |
Jeffrey Kissel |
System Engineering
Squeezer
State Control and Monitoring
Conceptual Design
Integration
Seismic Isolation
Basic R&D
Sensing and Control
Suspensions
Upgrades
|
12 Jun 2017 |
| D1700022-v2 |
Squeezer Controls Chassis 2 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jun 2017 |
| G1700902-v1 |
Machine learning for lock loss analysis |
Jameson Graef Rollins |
Sensing and Control
State Control and Monitoring
Detector Characterization
|
10 May 2017 |
| D1700036-v2 |
Squeezer Controls Chassis 3 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
18 Apr 2017 |
| D1002478-v1 |
Phase Frequency Discriminator Rear Panel |
Daniel Sigg |
Sensing and Control
|
10 Feb 2017 |
| D1000183-v2 |
IQ FET Demodulator Rear Panel |
Daniel Sigg |
Sensing and Control
|
15 Apr 2017 |
| D1700181-v1 |
Auxiliary Signals Concentrator 8 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700180-v1 |
Auxiliary Signals Concentrator 8 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700179-v1 |
Auxiliary Signals Concentrator 8 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700178-v1 |
Auxiliary Signals Concentrator 7 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| D1700177-v1 |
Auxiliary Signals Concentrator 7 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| E1700137-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 8 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| E1700136-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 7 |
Daniel Sigg |
State Control and Monitoring
|
13 Apr 2017 |
| E1700130-x0 |
Motorized Flipper/TTL IO Specification |
Daniel Sigg |
State Control and Monitoring
|
12 Apr 2017 |
| T1700131-v1 |
Time domain implementation of DCPD cross correlation |
Kiwamu Izumi |
Calibration
Detector Characterization
Commissioning
Data and Computing
|
28 Mar 2017 |
| G1700563-v1 |
CSWG Workshop at the March 2017 LVC meeting |
Dennis Coyne |
State Control and Monitoring
System Engineering
Sensing and Control
|
17 Mar 2017 |
| E1200784-v3 |
TwinCAT Library for the Advanced LIGO timing system |
Maggie Tse et al. |
State Control and Monitoring
|
09 Mar 2017 |
| G1700240-v1 |
Post-O2 software plans |
Jameson Graef Rollins |
Data Acquisition System
State Control and Monitoring
|
22 Feb 2017 |
| D0901783-v1 |
Common Mode Servo Rear Panel |
Daniel Sigg |
Sensing and Control
|
10 Feb 2017 |
| D1600510-v1 |
Corner Station Squeezer 3 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
31 Jan 2017 |
| D1100975-v1 |
RF Frequency Divide-by-Eight Mounting Plate |
Daniel Sigg |
Sensing and Control
|
27 Jan 2017 |
| E1100632-v2 |
Addresses of EtherCAT Chassis |
Daniel Sigg |
State Control and Monitoring
|
22 Jan 2017 |
| D1600505-v1 |
EtherCAT panel D-sub 25 for RF Frequency Difference Mixer |
Daniel Sigg |
State Control and Monitoring
|
21 Jan 2017 |
| D0902745-v5 |
aLIGO LSC IQ Demodulator Board |
Rich Abbott et al. |
Sensing and Control
|
05 Jan 2017 |
| T1600285-v3 |
Temperature control of silicon mirrors in locked cavities at 123 K |
Nizar Ezroura et al. |
State Control and Monitoring
Laser Systems
|
02 Jan 2017 |
| D1600506-v1 |
Corner Station Squeezer 2 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
27 Dec 2016 |
| D1600508-v1 |
EtherCAT Panel PZT Driver |
Daniel Sigg |
State Control and Monitoring
|
27 Dec 2016 |
| D0902563-v1 |
EtherCAT Panel Double D-sub 15 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| G1602295-v1 |
LIGO: the Dawn of Gravitational Wave Astronomy |
Jameson Graef Rollins |
Education, Outreach
State Control and Monitoring
Data and Computing
Data Acquisition System
Astrophysics / Multi-messenger
Public Talk / Colloquium
|
16 Nov 2016 |
| E1300780-v3 |
TwinCAT Library for PLC Info |
Alexa N Staley et al. |
State Control and Monitoring
|
19 Oct 2016 |
| E1200416-v3 |
TwinCAT Library for Demodulators |
Daniel Sigg |
State Control and Monitoring
|
11 Oct 2016 |
| G1400001-v3 |
The Status of Advanced LIGO: Light at the End of the Tunnels! |
Jeffrey Kissel et al. |
System Engineering
State Control and Monitoring
Integration
Auxiliary Optics
Core Optics
Laser Systems
Seismic Isolation
Commissioning
Public Talk / Colloquium
Sensing and Control
Data Acquisition System
Suspensions
Input Optics
|
17 Aug 2016 |
| E1300772-v2 |
TwinCAT Library for ALS State Machine |
Alexa N Staley et al. |
State Control and Monitoring
|
17 Aug 2016 |
| P1600066-v7 |
Distributed State Machine Supervision for Long-baseline Gravitational-wave Detectors with the Guardian Automation Platform |
Jameson Graef Rollins |
State Control and Monitoring
|
11 Aug 2016 |
| E1600256-v1 |
TwinCAT Library for PZT Shutter |
Daniel Sigg |
State Control and Monitoring
|
10 Aug 2016 |
| D1101115-v2 |
aLIGO, high quality, 6in Viewport Clamp, wedged |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
08 Jul 2011 |
| D961142-v1 |
60" HAM Cover, Type A-4, HAM Chamber |
Dennis Coyne |
Vacuum
Document Migration
|
27 Jul 2016 |
| D970427-v1 |
84" HAM Cover, Horizontal Access Module (HAM), LIGO Vacuum Equipment |
Dennis Coyne |
Vacuum
Document Migration
|
27 Jul 2016 |
| D080365-v6 |
Viewport Guard |
Michael Meyer |
Final Design
Observatory Facilities
Vacuum
|
19 May 2016 |
| D090007-v4 |
Advanced LIGO, Suspension, ETM/ITM Quad PM, Production Ear with Recess |
Marielle van Veggel |
Suspensions
Final Design
|
14 Apr 2016 |
| D060341-v11 |
ADVANCED LIGO, SUS, QUAD, PENULTIMATE REACTION MASS, ETM AND ITM CONFIGURATION |
Joe ODell et al. |
Suspensions
|
13 Apr 2016 |
| D080166-v9 |
aLIGO, SUS, PENRE QUAD, OSEM CAN ETM / ITM |
Joe ODell et al. |
Suspensions
|
06 Apr 2016 |
| D060375-v7 |
Advanced LIGO, SUS, Quad N-Ptype, UI MASS Main and Reaction Assembly Drawing and Process |
Joe ODell et al. |
Suspensions
|
29 Mar 2016 |
| T1000091-v2 |
Semiconductor Cleaning for In-vacuum Applications |
Rich Abbott et al. |
Assembly
Sensing and Control
|
22 Mar 2016 |
| G1600470-v1 |
Constructing Natural Glitch Dictionaries |
Maria Principe et al. |
Basic R&D
Data and Computing
Data Analysis
|
12 Mar 2016 |
| E1600080-v1 |
AOS/ISC SQZ: Output Faraday Isolator Test Report (LLO) |
Koji Arai et al. |
Sensing and Control
Squeezer
Auxiliary Optics
Subsystem Test
|
08 Mar 2016 |
| E1400209-x0 |
aLIGO, Automation, Guardian |
Daniel Sigg |
State Control and Monitoring
|
06 Mar 2016 |
| E1500157-v1 |
TwinCAT Library for EOM Driver |
Daniel Sigg |
State Control and Monitoring
|
24 Feb 2016 |
| G1400016-v7 |
Advanced LIGO Guardian: Overview and Coder’s Introduction |
Jameson Graef Rollins |
State Control and Monitoring
|
26 Jan 2016 |
| D060388-v4 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BRACKET UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
11 Jan 2016 |
| G1600019-v1 |
Plan for the replacement OFI assembling at LLO |
Koji Arai |
Squeezer
Auxiliary Optics
Assembly
|
04 Jan 2016 |
| G1501436-v1 |
Optical Second Harmonic Generation |
Curtis Rau |
Squeezer
|
30 Nov 2015 |
| P1500246-v1 |
Wavelength Tunable Optical Second Harmonic Generation Suitable For Use With The LIGO Squeezer |
Curtis Rau |
Squeezer
|
26 Nov 2015 |
| M050303-v5 |
Advanced LIGO Project Execution Plan |
David Shoemaker et al. |
Project Controls
Management
|
25 Nov 2015 |
| E080035-v1 |
Specification: Mirror Blank Material, Adv. LIGO Beamsplitter (BS) Mirror |
GariLynn Billingsley et al. |
Fabrication
Final Design
Core Optics
|
06 Nov 2015 |
| G1501274-v4 |
Status of the Advanced LIGO Project |
Jameson Graef Rollins |
Public Talk / Colloquium
Computing/archiving
Data Acquisition System
Data and Computing
State Control and Monitoring
|
19 Oct 2015 |
| T0900050-v1 |
Test Document for the Advanced LIGO Optical Timing Distribution System |
Daniel Sigg et al. |
Data Acquisition System
|
19 Oct 2015 |
| E1500401-v1 |
ECR: Monitoring of the EtherCAT field bus |
Daniel Sigg et al. |
State Control and Monitoring
|
01 Oct 2015 |
| E1300109-v4 |
EtherCAT End Channel Link List |
Patrick Thomas et al. |
State Control and Monitoring
|
21 Sep 2015 |
| E0900360-v7 |
CP COC CONTAINER ASSEMBLY BOM |
Kurt Buckland |
System Engineering
|
18 Sep 2015 |
| D990543-v2 |
LSC Photodiode Interface |
Daniel Sigg |
Sensing and Control
|
17 Sep 2015 |
| D0902001-v8 |
CP COC OPTIC CONTAINER ASSEMBLY |
Kurt Buckland |
System Engineering
|
09 Sep 2015 |
| D0900958-v7 |
GOLD COATING PATTERN END REACTION MASS BARREL |
Kurt Buckland |
Core Optics
System Engineering
|
02 Sep 2015 |
| D1000981-v3 |
aLIGO, GOLD COATING PATTERN, TCP (COMPENSATION PLATE) BARREL |
Kurt Buckland |
Core Optics
|
02 Sep 2015 |
| E0900113-v3 |
Compensation Plate Electro Static Drive gold coating specification |
GariLynn Billingsley |
Final Design
Core Optics
|
02 Sep 2015 |
| E0900112-v3 |
Compensation Plate Barrel gold coating specification |
GariLynn Billingsley |
Core Optics
Final Design
|
02 Sep 2015 |
| D080116-v2 |
End Reaction Mass (ERM) |
Russell Jones |
Final Design
Suspensions
|
02 Sep 2015 |
| D1000979-v3 |
D1000979_ALIGO, COC TCP (THIN COMPENSATION PLATE) SUBSTRATE |
Kurt Buckland |
Core Optics
|
01 Sep 2015 |
| E0900019-v2 |
Test procedure for the Clock, Gate, and DuoTone Signal Interface Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
27 Aug 2015 |
| E1500316-v2 |
TwinCAT Library for GPS Receivers |
Daniel Sigg |
State Control and Monitoring
|
19 Aug 2015 |
| D0900502-v5 |
AdvLIGO Systems, BSC5-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez |
System Engineering
Final Design
|
19 Oct 2009 |
| D0900512-v11 |
aLIGO Systems, WBSC6-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez et al. |
Final Design
System Engineering
|
03 Aug 2015 |
| G1500506-v2 |
Advanced LIGO Automation with Guardian |
Jameson Graef Rollins |
State Control and Monitoring
|
02 Aug 2015 |
| D0900891-v2 |
RF AM Measurement |
Daniel Sigg |
Sensing and Control
|
07 Jul 2015 |
| T1500292-v1 |
Advanced LIGO Guardian Documentation |
Jameson Graef Rollins |
State Control and Monitoring
|
17 Jun 2015 |
| E1500022-v1 |
Test Procedure for Auxiliary Signals Concentrator 6 |
Daniel Sigg |
State Control and Monitoring
|
16 Jun 2015 |
| G1500668-v1 |
Squeezing now and in the future: the road to 10 dB |
Katherine Dooley et al. |
Requirements
Sensing and Control
Commissioning
Basic R&D
Squeezer
Meeting
Integration
|
01 Jun 2015 |
| T080194-v1 |
Dynamic Vibration Absorber |
Dennis Coyne |
Basic R&D
System Engineering
|
28 May 2015 |
| D0900848-v3 |
RF AM Stabilization Power |
Daniel Sigg |
Sensing and Control
|
27 May 2015 |
| D060461-v2 |
QUAD LOWER STRUCTURE, PEN TEST MASS PAD |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060457-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY SHORT |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060455-v2 |
QUAD LOWER STRUCTURE X-BRACE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060446-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY, LONG |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060434-v2 |
SUS QUAD OUTER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D080090-v3 |
ADVANCED LIGO, SUS, BLADE TIP STOP MOUNT, BS TOP STAGE |
Joe ODell et al. |
Suspensions
|
20 Apr 2015 |
| E1500016-v1 |
ECR: Move PEM H0,L0 channels to H1,L1 |
Robert Schofield et al. |
Data and Computing
|
08 Apr 2015 |
| E1200630-v3 |
TwinCAT Library for Auxiliary Channels |
Alexa N Staley |
State Control and Monitoring
|
06 Apr 2015 |
| T1500091-v1 |
3IFO PSL ISS Photodetector Array Inventory Peter King Email |
Gary Davis et al. |
Project Controls
|
20 Mar 2015 |
| T1500083-v1 |
3IFO PSL Table Contents Packing Lists/Inventory |
Gary Davis et al. |
Project Controls
System Engineering
|
04 Mar 2015 |
| D1000561-v2 |
RF AM Measurement Rear Mounting Plate |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D1000560-v2 |
RF AM Measurement Rear Panel |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D1000216-v2 |
EOM Driver Attenuator |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| D0900847-v2 |
RF AM Stabilization Servo |
Daniel Sigg |
Sensing and Control
|
25 Feb 2015 |
| M1300468-v10 |
Acceptance Process for the Advanced LIGO Project |
Dennis Coyne et al. |
Policies
Project Controls
|
23 Feb 2015 |
| M070102-v2 |
M070102 Advanced LIGO Change Control Procedure |
Carol Wilkinson et al. |
Project Controls
Change Control
|
22 Feb 2015 |
| T1400316-v4 |
Instrument Science White Paper |
David McClelland et al. |
Seismic Isolation
Basic R&D
Laser Systems
Core Optics
Auxiliary Optics
Squeezer
Input Optics
Suspensions
Sensing and Control
|
10 Feb 2015 |
| T1000382-v2 |
Advanced LIGO Core Optics Material Design summary |
GariLynn Billingsley |
Core Optics
Final Design
|
09 Feb 2015 |
| E0900074-v3 |
Advanced LIGO Compensation Plate (CP) Coating Specification |
Rand Dannenberg |
Final Design
Core Optics
|
02 Feb 2015 |
| E1400104-x0 |
ECR: Replacing the Cart-Bias custom ramp parts with cdsFiltCrtl2 blocks |
Brian Lantz et al. |
Seismic Isolation
State Control and Monitoring
Integration
|
29 Jan 2015 |
| T1400733-v1 |
Tidal Controls in Advanced LIGO |
Daniel Sigg |
Sensing and Control
State Control and Monitoring
|
25 Jan 2015 |
| D1500029-v1 |
Auxiliary Signals Concentrator 6 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1500028-v1 |
Auxiliary Signals Concentrator 6 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1500027-v1 |
Auxiliary Signals Concentrator 6 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| E1400317-v2 |
End Station Controls Chassis 3 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1400175-v2 |
EtherCAT End Station Chassis 3 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| E1500021-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 6 |
Daniel Sigg |
State Control and Monitoring
|
23 Jan 2015 |
| D1300495-v1 |
AEI style SHG Copper Crystal Holder |
Christian Graef et al. |
Basic R&D
Squeezer
|
22 Jan 2015 |
| G1500065-v2 |
Guardian “core” status and roadmap |
Jameson Graef Rollins |
State Control and Monitoring
|
16 Jan 2015 |
| D020373-v5 |
8 Channel Valve Driver Board |
Benjamin Abbott |
Seismic Isolation
|
14 Jan 2015 |
| D040424-v1 |
TTFSS Daughter Board |
Daniel Sigg et al. |
Laser Systems
|
01 Jan 2015 |
| D070140-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, top stage blade wire clamp shim |
Joe ODell et al. |
Suspensions
Final Design
Fabrication
|
18 Dec 2014 |
| T1400736-v1 |
CDS workstation setup using Scientific Linux 6 |
Michael Thomas et al. |
Operations
Data and Computing
|
10 Dec 2014 |
| T1300532-v2 |
Medm replacement rules for ISC |
Daniel Sigg et al. |
Sensing and Control
State Control and Monitoring
|
05 Dec 2014 |
| D080168-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD , CAN BODY, ETM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
20 Nov 2014 |
| D060403-v8 |
Advanced LIGO, SUS, Quad Top Mass, TOP MASS - Main and Reaction Assembly Drawing |
Joe ODell et al. |
Suspensions
|
18 Nov 2014 |
| P1400193-v1 |
Enhancement of SHG for Squeezing in aLIGO: 2013 SURF |
Nathan Zhao |
Fabrication
Squeezer
|
08 Nov 2014 |
| E1400431-v1 |
TwinCAT Library for Fast Shutter Controls |
Daniel Sigg |
State Control and Monitoring
|
27 Oct 2014 |
| P1400189-v1 |
Correlated Noise in LIGO Detectors from Schumann Resonance |
Ryan Horton et al. |
Calibration
Project Controls
Education, Outreach
|
25 Sep 2014 |
| G1400891-v3 |
aLIGO Guardian status update and remaining tasks |
Jameson Graef Rollins |
State Control and Monitoring
|
09 Sep 2014 |
| T1300734-v1 |
Simulating the Advanced LIGO Interferometer Using the Real Control Code |
Juan Castillo |
Project Controls
|
31 Aug 2014 |
| T1400222-v2 |
Characterization of Second Harmonic Generators for Advanced LIGO Squeezing |
Sheila Dwyer et al. |
Squeezer
|
31 Aug 2014 |
| T1000137-v3 |
Drag Wiping and First Contact |
Margot Hennig et al. |
Core Optics
|
27 Aug 2014 |
| T050036-v4 |
Pre-Stabilized Laser Design Requirements |
Richard Savage et al. |
Laser Systems
Requirements
|
20 Aug 2014 |
| G1400886-v1 |
Decoherence and degradation in quantum filter cavities |
John Miller et al. |
Squeezer
Basic R&D
|
17 Aug 2014 |
| T1300155-v2 |
Alignment sensing control signals of DRMI |
Keiko Kokeyama et al. |
Squeezer
Commissioning
|
15 Aug 2014 |
| P1400157-v1 |
SURF 2014 SHG Progress Report II |
Nathan Zhao et al. |
Squeezer
|
15 Aug 2014 |
| D1000980-v6 |
aLIGO, TCP OPTICS WITH PRISM ASSEMBLY |
Kurt Buckland et al. |
Core Optics
|
12 Aug 2014 |
| D060335-v4 |
Advanced LIGO, SUS, TOP MASS Quad N-Ptype, RECESSED 1/4" 20 UNC X 0.75" CAP HEAD |
Joe ODell et al. |
Suspensions
|
12 Aug 2014 |
| P1400148-v1 |
Techniques for Resonant Optical Interferometry with Applications to the Advanced LIGO Gravitaional Wave Detectors. |
Chris Mueller |
State Control and Monitoring
Commissioning
Laser Systems
Final Design
Sensing and Control
Input Optics
|
04 Aug 2014 |
| T1400461-v2 |
Advanced LIGO Guardian Progress and Remaining Tasks |
Jameson Graef Rollins |
State Control and Monitoring
|
31 Jul 2014 |
| E1400265-x0 |
aLIGO, Slow Controls, Chassis, End 3 |
Daniel Sigg |
State Control and Monitoring
|
22 Jul 2014 |
| G1400776-v1 |
Guardian Overview |
Jameson Graef Rollins |
State Control and Monitoring
|
16 Jul 2014 |
| D080535-v2 |
STS-2 Interface Chassis |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D070527-v1 |
DC Power Filter Board |
Benjamin Abbott |
System Engineering
|
27 Jun 2014 |
| D040019-v4 |
STS-2 Interface Board |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D0901473-v1 |
STS-2 to T240 Interface Board |
Benjamin Abbott |
Seismic Isolation
|
27 Jun 2014 |
| D080521-v4 |
HEPI Pier Interface Schematic and PCB |
Benjamin Abbott |
Seismic Isolation
|
25 Jun 2014 |
| C1001899-v1 |
Statement of Work (SOW) for D1002424 Vibration Absorber parts |
Kurt Buckland |
System Engineering
Sensing and Control
|
14 Oct 2010 |
| T1100608-v4 |
Guardian Developer's Guide |
Christopher Kucharczyk et al. |
Data and Computing
Sensing and Control
|
18 Jun 2014 |
| G1400654-v1 |
Advanced LIGO Guardian Status Update |
Jameson Graef Rollins |
State Control and Monitoring
|
13 Jun 2014 |
| D1400176-v1 |
End Station Chassis 3 Name Plate |
Daniel Sigg |
State Control and Monitoring
|
04 Jun 2014 |
| E1300934-x0 |
aLIGO, Slow Controls, Controllers, Photodiode Amplifier |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
04 Jun 2014 |
| E090001-v1 |
Chassis Integration Plan Clock, Gate, and DuoTone Signal Interface Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
03 Jun 2014 |
| D080660-v3 |
D080660_ALIGO COC_BS_SUBSTRATE |
Calum Torrie |
Core Optics
Final Design
|
03 Jun 2014 |
| D0902346-v3 |
AdLIGO IQ Demodulator Cell |
Rich Abbott |
Sensing and Control
Basic R&D
|
03 Jun 2014 |
| T1300958-v4 |
Front-end Control State Implementation |
Stefan Ballmer et al. |
State Control and Monitoring
Data Acquisition System
|
22 May 2014 |
| T010007-v5 |
Cavity Optics Suspension Subsystem Design Requirements |
Mark Barton et al. |
Requirements
Suspensions
|
17 May 2014 |
| D060409-v4 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM ECD UNIT |
Joe ODell |
Suspensions
|
30 Apr 2014 |
| D080005-v4 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER TRIPLE, BS LOWER STRUCTURE |
Joe ODell |
Suspensions
|
22 Apr 2014 |
| D1100955-v1 |
Binary Switch Board |
Benjamin Abbott |
Data and Computing
|
18 Apr 2014 |
| T1400284-v2 |
Glitches in the Blend Switch - Origin and Fix |
Brian Lantz |
Integration
State Control and Monitoring
Seismic Isolation
Suspensions
|
17 Apr 2014 |
| E1300323-x0 |
aLIGO, Automation |
Jameson Graef Rollins |
State Control and Monitoring
|
17 Apr 2014 |
| E1400210-x0 |
aLIGO, Automation, Control State Definition |
Daniel Sigg |
State Control and Monitoring
|
17 Apr 2014 |
| D1002538-v5 |
aLIGO TCS Simplified Glass Former for Ring Heater Element |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Final Design
|
14 Apr 2014 |
| D060422-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| T0900485-v3 |
FET vs. Diode-ring Demodulator Noise Comparison |
Rich Abbott |
Sensing and Control
Basic R&D
|
27 Mar 2014 |
| D1201099-v1 |
Low Noise Voltage-Controlled Oscillator Chassis |
Gerardo Moreno et al. |
Data and Computing
|
27 Mar 2014 |
| P1300006-v1 |
[Thesis] Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer |
Squeezer
|
25 Mar 2014 |
| P0900255-v5 |
Advanced LIGO: The next generation of gravitational wave detectors |
Gregg Harry et al. |
Detector
Meeting
|
22 Mar 2014 |
| D1000658-v5 |
TCS Hartmann Sensor Plate Clamp for aLIGO |
Jesper Munch et al. |
Auxiliary Optics
Preliminary Design
Final Design
|
18 Mar 2014 |
| D070234-v4 |
Advanced LIGO, SUS, Penultimate Mass, Pen Re Mass Magnets (External Shielded Magnets) |
Joe ODell et al. |
Suspensions
|
11 Mar 2014 |
| E1000884-v5 |
BOM and Drawing Tree, aLIGO TCS H2 CO2 Laser Steering Mirror Assemblies for BSC7 and BSC8 |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Fabrication
Final Design
|
07 Mar 2014 |
| D070237-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Base (External Shielded Magnets) |
Joe ODell |
Suspensions
|
05 Mar 2014 |
| D1100546-v2 |
Legacy WFS Interface Board |
Rich Abbott |
Sensing and Control
Final Design
|
21 Feb 2014 |
| D060355-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Mass Assembly |
Joe ODell |
Suspensions
|
18 Feb 2014 |
| D1001517-v6 |
TCS Ring Heater In-Vac Cable Assembly |
Christopher Guido et al. |
Vacuum
Auxiliary Optics
Final Design
Fabrication
|
12 Feb 2014 |
| T070189-v3 |
Design Specifications for the OMC Suspension |
Norna Robertson et al. |
Suspensions
Requirements
|
07 Feb 2014 |
| D080659-v3 |
D080659_ALIGO COC_CP_SUBSTRATE |
Calum Torrie |
Final Design
Core Optics
|
07 Feb 2014 |
| D070220-v5 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp |
Joe ODell et al. |
Installation
Fabrication
Final Design
Suspensions
|
06 Feb 2014 |
| G1301210-v1 |
Software Watchdogs for SUS + ISI + HEPI |
Brian Lantz et al. |
Suspensions
Seismic Isolation
Integration
Data and Computing
|
29 Jan 2014 |
| D0900360-v13 |
aLIGO Systems, WBSC8-H2 Top Level Chamber Assembly |
Jose Eduardo Chavez |
Final Design
System Engineering
|
23 Jan 2014 |
| G1300769-v2 |
HAM-ISI Guardian State Evolution |
Brian Lantz et al. |
Seismic Isolation
Conceptual Design
State Control and Monitoring
|
20 Jan 2014 |
| T1300629-x0 |
SEI Guardians |
Brian Lantz |
State Control and Monitoring
Seismic Isolation
Commissioning
|
20 Jan 2014 |
| T1300435-v1 |
Suspension Module Guardian Design |
Jeffrey Kissel et al. |
Preliminary Design
Suspensions
State Control and Monitoring
Commissioning
|
20 Jan 2014 |
| T1300884-v3 |
Advanced LIGO Automation Requirements |
Jameson Graef Rollins |
State Control and Monitoring
Requirements
|
20 Jan 2014 |
| D1000708-v7 |
aLIGO TCS Hartmann Sensor Camera Spacer Plate |
Mindy Jacobson et al. |
Fabrication
Final Design
Auxiliary Optics
|
15 Jan 2014 |
| G1301311-v1 |
aLIGO Guardian Synopsis and Status Update |
Jameson Graef Rollins |
State Control and Monitoring
|
19 Dec 2013 |
| T0900555-v6 |
Error Estimation of the LIGO Response Function |
Jeffrey Kissel |
Calibration
Sensing and Control
Modelling
|
18 Dec 2013 |
| D060394-v3 |
SPACER UI MAGNET AND FLAG, aLIGO SUS |
Joe ODell et al. |
Suspensions
Final Design
|
18 Dec 2013 |
| E1300935-v1 |
Photodiode Amplifier Wiring Diagram |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
11 Dec 2013 |
| G1300530-v2 |
The aLIGO Guardian |
Jeffrey Kissel |
Preliminary Design
Commissioning
State Control and Monitoring
|
11 Dec 2013 |
| D1301019-v1 |
Photodiode Amplifier Rear Panel |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
10 Dec 2013 |
| D1301018-v1 |
Photodiode Amplifier Front Panel |
Daniel Sigg |
Auxiliary Optics
State Control and Monitoring
|
10 Dec 2013 |
| D1301021-v1 |
Photodiode Amplifier EtherCAT |
Daniel Sigg |
State Control and Monitoring
Auxiliary Optics
|
09 Dec 2013 |
| T0900423-v4 |
ISC Quadrant Photodetector Design |
Rich Abbott et al. |
Basic R&D
Sensing and Control
|
09 Dec 2013 |
| D1201289-v1 |
EtherCAT Adapter IDC-64 |
Daniel Sigg |
State Control and Monitoring
|
05 Dec 2013 |
| D1201290-v1 |
EtherCAT Panel IDC-64 |
Daniel Sigg |
State Control and Monitoring
|
05 Dec 2013 |
| D060337-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, PENULTIMATE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| G1300850-v1 |
Simulating the Advanced LIGO Interferometer Using the Real Control Code |
Juan Castillo |
Project Controls
|
27 Nov 2013 |
| T1000044-v3 |
aLIGO I&Q RF Demodulator Design |
Rich Abbott |
Sensing and Control
Final Design
|
25 Nov 2013 |
| D1102171-v2 |
aLIGO TCS CO2P Steering Mirror 2, H1-L1 |
Mindy Jacobson |
Preliminary Design
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
05 Nov 2013 |
| D1300975-v1 |
EtherCAT Panel Fast Shutter |
Daniel Sigg |
State Control and Monitoring
|
03 Nov 2013 |
| D1100495-v3 |
aLIGO TCS WASHER, CLAMP RING |
Mindy Jacobson |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
01 Nov 2013 |
| E080541-v6 |
Quick Start Guide Optical Timing Distribution System Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
28 Oct 2013 |
| T1300683-v1 |
Tidal Prediction for Advanced LIGO: Final Report |
Noah Kurinsky et al. |
State Control and Monitoring
Modelling
|
27 Oct 2013 |
| E1000295-v8 |
aLIGO TCS Ring Heater Assembies, Formal Drawing Tree & BOM Reference |
Guido Mueller et al. |
Auxiliary Optics
Vacuum
Incoming Inspection
Fabrication
|
25 Oct 2013 |
| E1300810-x0 |
aLIGO, Automation, State Diagrams |
Sheila Dwyer |
State Control and Monitoring
|
24 Oct 2013 |
| E1300790-v1 |
TwinCAT Library for Photodetectors |
Alexa N Staley et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300787-v1 |
TwinCAT Library for Summing Node |
Daniel Sigg et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300786-v1 |
TwinCAT Library for Rotation Stage |
Alexa N Staley et al. |
State Control and Monitoring
|
16 Oct 2013 |
| E1300783-v1 |
TwinCAT Library for Save/Restore |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300782-v1 |
TwinCAT Library for PSL Environment |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300779-v1 |
TwinCAT Library for LTC |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300778-v1 |
TwinCAT Library for Laser Power |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300777-v1 |
TwinCAT Library for Fiber Polarization Correction |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300776-v1 |
TwinCAT Library for Fiber Distribution |
Alexa N Staley et al. |
State Control and Monitoring
|
15 Oct 2013 |
| E1300430-v3 |
TwinCAT Library for ALS Communication |
Sheila Dwyer |
State Control and Monitoring
|
15 Oct 2013 |
| T1300175-v3 |
Installation of TwinCAT Targets |
Daniel Sigg |
State Control and Monitoring
|
14 Oct 2013 |
| D070539-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Reaction Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| T0900080-v1 |
OMC Suspension Advanced LIGO Test Plan |
Norna Robertson et al. |
System Test
Suspensions
|
06 Sep 2013 |
| E1200626-v2 |
TwinCAT Library for Common Mode Servo Board |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| E1200631-v2 |
TwinCAT Library for Shutter Controls |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| E1200435-v3 |
TwinCAT Library for RF Amplifiers, Dividers and Doublers |
Daniel Sigg et al. |
State Control and Monitoring
|
04 Sep 2013 |
| E1200628-v2 |
TwinCAT Library for PZT Mirrors |
Alexa N Staley |
State Control and Monitoring
|
04 Sep 2013 |
| D1002963-v1 |
EtherCAT Panel Low Noise VCO |
Daniel Sigg |
Sensing and Control
|
30 Aug 2013 |
| G1300834-v1 |
Tidal Prediction for Advanced LIGO: Final Presentation |
Noah Kurinsky |
Modelling
State Control and Monitoring
|
26 Aug 2013 |
| G1300872-v1 |
aLIGO Guardian Review |
Jameson Graef Rollins |
State Control and Monitoring
|
26 Aug 2013 |
| D080534-x0 |
Timing Master/FanOut Assembly Drawing and Parts List |
Daniel Sigg |
Data Acquisition System
|
01 Feb 2009 |
| D060323-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM POSITION ADJUSTMENT PLATE |
Joe ODell et al. |
Final Design
Suspensions
|
23 Aug 2013 |
| D060329-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, Top Stage STIFF BACK |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| E0900301-v3 |
IOO Faraday Isolator Assembly and Certification Procedures |
David Tanner et al. |
Detector
Fabrication
Input Optics
|
13 Dec 2011 |
| P1200041-v19 |
Enhancing the sensitivity of the LIGO gravitational wave detector by using squeezed states of light |
Daniel Sigg et al. |
Basic R&D
Squeezer
|
07 Aug 2013 |
| D060356-v2 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Reaction Mass Assembly Tooling |
Joe ODell |
Suspensions
|
05 Aug 2013 |
| D1101292-v3 |
H1-L1 SM1 Azimuth Support Bracket |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Assembly
Fabrication
|
26 Jul 2013 |
| D070247-v3 |
Advanced LIGO, SUS, Quad ITM/ETM, Tablecloth Pads (Upper Structure) |
Joe ODell et al. |
Auxiliary Optics
Final Design
|
17 Jul 2013 |
| D070222-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Cable Clamp |
Joe ODell |
Suspensions
|
05 Sep 2012 |
| D080240-v2 |
Adv LIGO, ALIGO Quad, THIS, PEN RE MASS BUMP STOP ASSEMBLY, PENULTIMATE REACTION MASS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D060349-v3 |
Advanced LIGO, SUS, N-Ptype PENULTIMATE MASS, LIGO 1 OSEM MOUNT (FOR PENRE MASS) |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060352-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, PITCH MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060332-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP TOP STAGE |
Joe ODell |
Suspensions
|
08 Jul 2013 |
| E1300580-v1 |
Shutter Controller Modifications |
Daniel Sigg |
State Control and Monitoring
|
08 Jul 2013 |
| D060316-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD ADJUSTER |
Joe ODell |
Suspensions
|
31 Mar 2011 |
| D060320-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM ADJUSTMENT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060322-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM ADJUSTER |
Joe ODell |
Final Design
Suspensions
|
29 Sep 2010 |
| G1300699-v2 |
Squeezing Angle fluctuations in gravitational wave detectors |
Sheila Dwyer |
Meeting
Squeezer
|
07 Jul 2013 |
| G1300698-v2 |
Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer et al. |
Squeezer
Meeting
|
07 Jul 2013 |
| E0900140-v3 |
Advanced LIGO End Reaction Mass Coating Specification |
Margot Hennig |
Final Design
Core Optics
|
04 Jul 2013 |
| D060310-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, Tablecloth (Noise Prototype) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060324-v5 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CARTRIDGE Assembly |
Joe ODell |
Suspensions
|
03 Jul 2013 |
| D1002431-v2 |
aLIGO TCS CO2 Laser In-Vacuum Steering Optics Assembly, H2, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
|
09 Feb 2011 |
| D1000715-v4 |
TCS Hartmann Sensor Camera Mount |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Auxiliary Optics
|
25 Jun 2013 |
| E1300442-v1 |
TwinCAT Library for Real-time System Communication |
Daniel Sigg |
State Control and Monitoring
|
18 Jun 2013 |
| D070107-v2 |
HAM6 Septum Plate for ELIGO |
Jim Warner |
Vacuum
Final Design
|
10 Jun 2013 |
| D0900541-v5 |
Faraday Isolator Upper Blade |
Niem Nguyen |
Auxiliary Optics
Modelling
|
06 Jun 2013 |
| D1101977-v3 |
End Station Controls Chassis 2 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
06 Jun 2013 |
| D060392-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MAGNET RETAINER (MODIFIED 1/4-20 HEX HEAD SCREW 15" LONG) |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| D060393-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS MAGNET AND FLAG MOUNT |
Joe ODell |
Suspensions
|
17 Aug 2009 |
| S0900347-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900345-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| G1300589-v1 |
Squeezed Light Techniques for Gravitational Wave Detection |
Daniel Sigg |
Squeezer
|
29 May 2013 |
| D020133-v1 |
Lower Blade Wire Clamp Plate (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
28 May 2013 |
| D020132-v2 |
Lower Blade Wire Clamp (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
28 May 2013 |
| D070020-v2 |
Magnet Holder (OMCS) |
Derek Bridges |
Preliminary Design
Suspensions
|
28 May 2013 |
| D060491-v2 |
Main Section, Upper Mass (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
28 May 2013 |
| D070022-v1 |
Wire Clamp, Top Blade (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D020139-v1 |
Wire Clamp Plate, Upper Mass (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D020309-v1 |
Wire Clamp Plate with Groove, Upper Mass (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D070030-v1 |
C-Clamp for Top Wire (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D030042-v1 |
Wire Clamp Plate, Upper Blade (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D030450-v2 |
Pull Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030449-v2 |
Push Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030447-v2 |
Rotating Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
28 May 2013 |
| D030448-v3 |
Base Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
28 May 2013 |
| D020336-v2 |
Lower Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020313-v2 |
Lower Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020335-v2 |
Lower Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020334-v2 |
Lower Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020333-v2 |
Lower Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020308-v2 |
Lower Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Derek Bridges |
Suspensions
Final Design
|
22 May 2013 |
| D020340-v2 |
Lower Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020314-v2 |
Lower Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020339-v2 |
Lower Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020338-v2 |
Lower Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020337-v2 |
Lower Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020119-v2 |
Lower Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020680-v2 |
Upper Blade Clamp Shim, 2mm (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020679-v2 |
Upper Blade Clamp Shim, 1mm (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030466-v2 |
Upper Blade Clamp, Lower Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030465-v2 |
Upper Blade Clamp, Lower Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030463-v2 |
Upper Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030462-v2 |
Upper Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030461-v2 |
Upper Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030460-v2 |
Upper Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030459-v3 |
Upper Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030464-v2 |
Upper Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020690-v2 |
Upper Blade Clamp, Upper Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020689-v2 |
Upper Blade Clamp, Upper Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D020328-v2 |
Upper Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D020312-v2 |
Upper Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020327-v2 |
Upper Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020326-v2 |
Upper Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020325-v2 |
Upper Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Michael Meyer |
Suspensions
Final Design
|
21 May 2013 |
| D020116-v2 |
Upper Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D070035-v4 |
Metal Bench Assembly (OMCS) |
Derek Bridges |
Sensing and Control
Suspensions
|
14 May 2013 |
| D060537-v4 |
Lower Wire Assembly (OMCS) |
Derek Bridges |
Suspensions
|
14 May 2013 |
| D060536-v1 |
Upper Wire Assembly (OMCS) |
Christopher Echols |
Suspensions
|
14 May 2013 |
| D030451-v2 |
Rotational Adjuster Assembly (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
14 May 2013 |
| D1300170-v2 |
EtherCAT Rotation Stage Interface Front Panel (rack) |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300172-v2 |
EtherCAT Rotation Stage Interface Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300171-v2 |
EtherCAT Rotation Stage Interface Front Panel (stand-alone) |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D1300174-v2 |
EtherCAT Rotation Stage Interface Top Panel |
Daniel Sigg |
State Control and Monitoring
|
30 Apr 2013 |
| D070219-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp Base |
Joe ODell et al. |
Suspensions
|
29 Apr 2013 |
| D070250-v4 |
Base Plate, Lower Wire Jig (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
17 Apr 2013 |
| D020677-v3 |
Library of Clamps (HSTS/OMCS) |
Michael Meyer |
Suspensions
Final Design
|
17 Apr 2013 |
| D070139-v1 |
Upper Wire Jig Assembly (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
17 Apr 2013 |
| D0900308-v4 |
Structural Weldment (OMCS) |
Michael Meyer et al. |
Suspensions
Final Design
|
16 Apr 2013 |
| G1300119-v2 |
Friendly Power Shutdown for LLO Corner Buildings |
David Kinzel |
Data Acquisition System
Suspensions
Input Optics
Observatory Facilities
Sensing and Control
Auxiliary Optics
Core Optics
Policies
Laser Systems
Seismic Isolation
Commissioning
System Engineering
Data and Computing
Vacuum
|
11 Apr 2013 |
| D1100911-v3 |
aLIGO TCS URS50 MOUNT |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
Input Optics
|
04 Apr 2013 |
| T070219-v1 |
LIGO Data Grid Reference Operating System |
Erik Katsavounidis et al. |
Data and Computing
Policies
|
27 Mar 2013 |
| E1200875-v2 |
Test Procedure for Auxiliary Signals Concentrator 5 |
Daniel Sigg |
State Control and Monitoring
|
27 Mar 2013 |
| D070538-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Test Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| F1100002-v4 |
Winding Template, aLIGO TCS Ring Heater Elements |
Mindy Jacobson et al. |
Incoming Inspection
Fabrication
Auxiliary Optics
Vacuum
|
07 Mar 2013 |
| E1200597-x0 |
aLIGO, AOS, TCS, Slow Controls, EtherCAT Hardware |
Mindy Jacobson et al. |
Auxiliary Optics
State Control and Monitoring
|
04 Mar 2013 |
| D1300131-v1 |
EtherCAT Rotation Stage Interface |
Daniel Sigg |
State Control and Monitoring
|
01 Mar 2013 |
| T010076-v2 |
Advanced LIGO Optical Layout Overview |
Dennis Coyne |
Preliminary Design
System Engineering
|
28 Feb 2013 |
| D1001371-v3 |
Timing Comparator Front Panel |
Ilya Belopolski |
Data Acquisition System
|
27 Feb 2013 |
| E1300144-x0 |
PSL Laser and Ante Room Chassis |
Daniel Sigg |
Laser Systems
State Control and Monitoring
|
26 Feb 2013 |
| E1300145-x0 |
PSL Diode and Chiller Room Chassis |
Daniel Sigg |
State Control and Monitoring
Laser Systems
|
26 Feb 2013 |
| D1300175-v1 |
EtherCAT Rotation Stage Interface Mounting Plate |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2013 |
| D1300173-v1 |
EtherCAT Rotation Stage Interface Bottom Panel |
Daniel Sigg |
State Control and Monitoring
|
25 Feb 2013 |
| D1200265-v3 |
Elevation Support Web, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Assembly
Preliminary Design
Final Design
Fabrication
|
22 Feb 2013 |
| D1102384-v3 |
aLIGO TCS CO2P SM2 ASSY LONG SUPPORT |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
22 Feb 2013 |
| E1201068-v1 |
Test Report for the Shutter Controllers for Advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
22 Feb 2013 |
| D1101120-v2 |
Name plate Laser/Ante PSL |
Jose Puente |
Installation
Laser Systems
|
22 Feb 2013 |
| D1101121-v2 |
PSL/IO/TCS Chassis Name Plate |
Jose Puente |
Installation
Laser Systems
|
22 Feb 2013 |
| D1300165-v1 |
EtherCAT Panel Motor Supply |
Daniel Sigg |
State Control and Monitoring
|
22 Feb 2013 |
| D1300132-v1 |
EtherCAT Panel Rotation Stage |
Daniel Sigg |
State Control and Monitoring
|
20 Feb 2013 |
| D1300143-v1 |
EtherCAT Panel IO PZT |
Daniel Sigg |
State Control and Monitoring
|
20 Feb 2013 |
| D1101771-v2 |
aLIGO TCS CO2P SM1 Wedge Support, H1-L1 |
Mindy Jacobson |
Final Design
Fabrication
Preliminary Design
Auxiliary Optics
Vacuum
|
20 Feb 2013 |
| E070079-v2 |
SUBSTRATE, ALIGO INPUT MODE CLEANER CURVED MIRROR (IMCC) |
Rodica Martin et al. |
Final Design
Input Optics
|
19 Feb 2013 |
| T1000334-v2 |
Review Report Interferometer Sensing and Control Final Design |
Robert Schofield et al. |
Sensing and Control
|
17 Feb 2013 |
| D1300133-x0 |
EtherCAT Panel IO PZT |
Daniel Sigg |
State Control and Monitoring
|
14 Feb 2013 |
| D1201418-v3 |
EtherCAT Beam Diverter Test Rig Back Panel |
Jax Sanders |
State Control and Monitoring
|
08 Feb 2013 |
| D1201416-v1 |
EtherCAT Beam Diverter Test Rig |
Jax Sanders |
State Control and Monitoring
|
08 Feb 2013 |
| D1201417-v3 |
EtherCAT Beam Diverter Test Rig Front Panel |
Jax Sanders et al. |
State Control and Monitoring
|
07 Feb 2013 |
| E1200424-v5 |
TwinCAT Library for ISC Whitening Chassis |
Daniel Sigg |
State Control and Monitoring
|
24 Jan 2013 |
| D1201535-v1 |
Interlocks/Lighting Feedthrough Panel (Left Side) |
Daniel Sigg |
State Control and Monitoring
|
18 Jan 2013 |
| G1300033-v1 |
Quantum noise reduction using squeezed states in LIGO |
Sheila Dwyer |
Squeezer
|
16 Jan 2013 |
| T1000192-v3 |
Output Faraday Isolator Test Plan |
Michael Smith |
Auxiliary Optics
Final Design
|
15 Jan 2013 |
| D1100682-v3 |
EtherCAT End Station Chassis 2 |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| E1101029-v3 |
End Station Controls Chassis 2 Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201354-v2 |
Auxiliary Signals Concentrator 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201353-v2 |
Auxiliary Signals Concentrator 5 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1201352-v2 |
Auxiliary Signals Concentrator 5 |
Daniel Sigg |
State Control and Monitoring
|
08 Jan 2013 |
| D1100539-v2 |
aLIGO TCS .25'' Thick Optical Window |
Alexander Lynch et al. |
Preliminary Design
Final Design
Fabrication
Auxiliary Optics
Vacuum
|
07 Jan 2013 |
| D060460-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (SHORT) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060459-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, SHORT |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060458-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D1101294-v3 |
H1-L1 SM1 Azimuth Bracket |
Mindy Jacobson et al. |
Final Design
Fabrication
Preliminary Design
Auxiliary Optics
Vacuum
|
19 Dec 2012 |
| D060492-v4 |
Advanced LIGO, SUS, Quad ETM/ITM, Upper Structure Weldment |
Joe ODell |
Final Design
Suspensions
|
18 Dec 2012 |
| E1201078-x0 |
aLIGO, ISC, Electronics, Beam Diverter Tester |
Daniel Sigg |
State Control and Monitoring
|
03 Dec 2012 |
| D1201482-v1 |
EtherCAT TEC Interface |
Daniel Sigg |
State Control and Monitoring
|
16 Nov 2012 |
| D1201359-v1 |
EtherCAT TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
16 Nov 2012 |
| D060348-v3 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, OSEM TRANSLATION PLATE, ETM PEN RE MASS CAN |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060351-v3 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, BASE PLATE, LIGO 1 OSEM MOUNT |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| E1100897-v1 |
EtherCAT H1 4km Remote Access Controls Chassis Wiring Diagram |
Daniel Sigg |
State Control and Monitoring
|
26 Oct 2012 |
| D1100993-v2 |
NICKEL/COPPER ALLOY 400 .375-16 HEX NUT, MODIFIED |
Jesse Terrazas et al. |
Final Design
Auxiliary Optics
|
25 Oct 2012 |
| D1002225-v4 |
ESD Connector Flex Circuit |
Jack Davis et al. |
Auxiliary Optics
Conceptual Design
|
23 Oct 2012 |
| E0900073-v3 |
Advanced LIGO Beam Splitter (BS) Coating Specification |
Rand Dannenberg |
Final Design
Core Optics
|
20 Oct 2012 |
| D1000587-v3 |
5 AXIS INSTALLATION TABLE on CART - Historical Reference Only |
Calum Torrie |
System Engineering
|
18 Oct 2012 |
| E1200003-v2 |
Formal Drawing Tree & BOM, aLIGO TCS CO2 Laser Projection Steering Mirror 2, H1/L1 |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
18 Oct 2012 |
| T080261-v3 |
Building L4-C Pods |
Stephany Foley et al. |
Seismic Isolation
Final Design
|
12 Oct 2012 |
| D060410-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
12 Oct 2012 |
| D1102077-v2 |
Washer Plate, Upper UHV Ring Heater Cable Connector Bracket |
Mindy Jacobson et al. |
Vacuum
Installation
Auxiliary Optics
Fabrication
|
10 Oct 2012 |
| D1102074-v2 |
Nut Plate, Upper UHV Ring Heater Cable Connector Bracket |
Mindy Jacobson et al. |
Fabrication
Vacuum
Installation
Auxiliary Optics
|
10 Oct 2012 |
| E1101044-v3 |
BOM and Drawing Tree, aLIGO TCS CO2P Steering Mirror 1 Assembly, H1/L1 |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Preliminary Design
Fabrication
Final Design
|
10 Oct 2012 |
| D070337-v8 |
Bottom Mass Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
09 Oct 2012 |
| D1201340-v1 |
Corner Station Controls Chassis 5 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2012 |
| D1201360-v1 |
EtherCAT Panel for TEC Driver |
Daniel Sigg |
State Control and Monitoring
|
04 Oct 2012 |
| E1200375-x0 |
aLIGO, Slow Controls, Chassis, Corner 5 |
Daniel Sigg |
State Control and Monitoring
|
03 Oct 2012 |
| E1200874-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 5 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200873-v1 |
Test Procedure for Auxiliary Signals Concentrator 4 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201351-v1 |
Auxiliary Signals Concentrator 4 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201345-v1 |
Auxiliary Signals Concentrator 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200872-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 4 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200868-v1 |
Test Procedure for Auxiliary Signals Concentrator 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| E1200867-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 3 |
Daniel Sigg |
State Control and Monitoring
|
02 Oct 2012 |
| D1201347-v1 |
Auxiliary Signals Concentrator 3 Rear Panel |
Daniel Sigg |
State Control and Monitoring
|
01 Oct 2012 |
| D1201346-v1 |
Auxiliary Signals Concentrator 3 Front Panel |
Daniel Sigg |
State Control and Monitoring
|
01 Oct 2012 |
| D1002098-v2 |
aLIGO_TMS_TEST_MASS_PLATE |
Ken Mailand |
Final Design
Auxiliary Optics
|
25 Sep 2012 |
| G1100150-v3 |
LLO Safety Document Emphasis |
David Kinzel |
Installation
Laser Systems
Safety
|
25 Sep 2012 |
| D1002100-v2 |
aLIGO_TMS_TEST_MASS_SHORTBAR |
Ken Mailand |
Final Design
Auxiliary Optics
|
20 Sep 2012 |
| D1002099-v1 |
aLIGO_TMS_ TEST_MASS_LONGBAR |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
19 Sep 2012 |
| D080241-v2 |
Adv. LIGO, SUS, Earthquake Stop Assembly |
Joe ODell |
Suspensions
Final Design
|
10 Sep 2012 |
| D030025-v1 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Fabrication
|
09 Sep 2012 |
| D070217-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D070214-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Top Ring Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D060475-v4 |
ADVANCED LIGO, SUS, EARTHQUAKE-STOP MOUNTS-LONG, LOWER STRUCTURE |
Joe ODell et al. |
Final Design
Suspensions
|
09 Sep 2012 |
| D060390-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI Mass, Wire Clamp Body Top Wire |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070225-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070221-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp Assy. |
Joe ODell et al. |
Final Design
Suspensions
|
07 Sep 2012 |
| D070218-v3 |
ALIGO, SUS, Quad, Wiring Harness, Mass Wire Clamp |
Joe ODell et al. |
Final Design
Fabrication
|
07 Sep 2012 |
| D060336-v4 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, 2MM CAM, OSEM ADJUSTER |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D060389-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, ADJUSTER UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D060387-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D1101092-v3 |
aLIGO Septum Viewport Assembly, wedged |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
30 Aug 2012 |
| D080163-v1 |
Advanced LIGO, SUS, Output Mode Cleaner, OMC Crossbar Assembly |
Michael Meyer |
Suspensions
|
27 Aug 2012 |
| D1100999-v4 |
aLIGO, high quality, non-wedged, 6" Viewport Assembly |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
22 Aug 2012 |
| D1200681-v4 |
aLIGO Photon Calibrator Laser Mounting Block |
Jonathan Berliner |
Auxiliary Optics
|
21 Aug 2012 |
| D1102440-v2 |
Support Bracket, Short-Side Suspension Arm |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
09 Aug 2012 |
| D1102441-v2 |
Support Bracket, Long-Side Suspension Arm |
Mindy Jacobson et al. |
Final Design
Fabrication
Preliminary Design
Vacuum
Auxiliary Optics
|
09 Aug 2012 |
| T070304-v1 |
Vibration Transmission to OMC Bench via Cabling |
Norna Robertson |
Suspensions
Modelling
|
08 Aug 2012 |
| D1102380-v2 |
aLIGO TCS CO2P SM2 ASSY SHORT SUPPORT |
Mindy Jacobson et al. |
Fabrication
Final Design
Preliminary Design
Vacuum
Auxiliary Optics
|
06 Aug 2012 |
| D1001222-v3 |
Lower Structure Assembly Tooling - Top Plate Large |
Kurt Buckland |
Suspensions
System Engineering
|
02 Aug 2012 |
| D961115-v4 |
BSC Floor Assembly & Details, Beam Splitter Chamber (BSC), LIGO Vacuum Equipment |
Dennis Coyne |
Document Migration
Vacuum
Fabrication
Final Design
|
31 Jul 2012 |
| D1003312-v8 |
aLIGO TCS Ring Heater End-to-End Wiring Diagram |
Stephen O'Connor |
Auxiliary Optics
Vacuum
Fabrication
Final Design
|
24 Jul 2012 |
| E1200545-v3 |
TwinCAT Library for Error Handling |
Daniel Sigg |
State Control and Monitoring
|
23 Jul 2012 |
| E1200629-v1 |
TwinCAT Library for Photodetector DC Monitors |
Alexa N Staley |
State Control and Monitoring
|
20 Jul 2012 |
| D0900357-v2 |
Faraday Isolator Wedged Prism Holder |
Niem Nguyen |
Final Design
Auxiliary Optics
|
17 Jul 2012 |
| D1000509-v2 |
aLIGO AOS OpLev TX Mounting Plate |
Craig Conley |
Auxiliary Optics
|
26 Jun 2012 |
| D1102413-v1 |
Elevation Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Final Design
Fabrication
Preliminary Design
Vacuum
Auxiliary Optics
|
25 Jun 2012 |
| D030078-v2 |
Add-on Mass, 20g |
Michael Meyer |
Final Design
Suspensions
|
21 Jun 2012 |
| D020351-v2 |
Add-on Mass, 50g |
Michael Meyer |
Final Design
Suspensions
|
21 Jun 2012 |
| D020350-v3 |
Add-on Mass, 100g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| E1000065-v6 |
aLIGO TCS CO2 Laser Specification |
Mindy Jacobson et al. |
Auxiliary Optics
Final Design
Preliminary Design
|
20 Jun 2012 |
| D1200878-v1 |
aLIGO Pcal Laser Shutter Hex Post |
Jonathan Berliner |
Modelling
Assembly
Calibration
Fabrication
Laser Systems
Auxiliary Optics
|
12 Jun 2012 |
| D0902025-v3 |
Upper AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
04 Jun 2012 |
| D0901493-v3 |
Lower AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
04 Jun 2012 |
| D1102176-v1 |
Azimuth Support Plate, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Fabrication
Auxiliary Optics
Vacuum
|
04 Jun 2012 |
| G1200555-v2 |
LAE and Enclosures Access Discussion |
David Kinzel et al. |
Installation
Laser Systems
Safety
Observatory Facilities
|
01 Jun 2012 |
| D1200450-v4 |
Photon Calibrator Transmitter Breadboard Mounting Adapters |
Jonathan Berliner et al. |
Installation
Laser Systems
Fabrication
Calibration
|
31 May 2012 |
| D070442-v7 |
Structural Weldment, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
29 May 2012 |
| E1200494-x0 |
aLIGO, PSL, Test Reports |
Benno Willke et al. |
Laser Systems
|
16 May 2012 |
| E0900349-v12 |
ETM Telescope Secondary Parabolic Mirror, ADLIGO |
Michael Smith et al. |
Final Design
Auxiliary Optics
|
15 May 2012 |
| T0900607-v5 |
AdvLigo CDS Realtime Sequencer Software |
Rolf Bork |
Data Acquisition System
|
14 May 2012 |
| E1200362-x0 |
aLIGO, Slow Controls, Controllers, Picomotor Table Feedthrough |
Daniel Sigg |
State Control and Monitoring
|
09 May 2012 |
| D1101849-v1 |
aLIGO TCS HWS OPTICS ASSY In Vac, L1 HAM5 |
Aidan Brooks et al. |
System Engineering
Vacuum
Integration
Auxiliary Optics
Preliminary Design
Final Design
Fabrication
|
04 May 2012 |
| D060426-v3 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, UI MASS WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
03 May 2012 |
| D1000395-v2 |
aLIGO INTERMEDIATE TOP MASS SPACER |
Ignacio Romero |
Auxiliary Optics
Conceptual Design
|
01 May 2012 |
| F1200003-v1 |
Template for TwinCAT Library Documentation |
Daniel Sigg |
State Control and Monitoring
|
27 Apr 2012 |
| D070056-v2 |
Advanced LIGO, SUS, Quad N-PType, Quad Dog Clamp |
Joe ODell |
Final Design
Suspensions
|
25 Apr 2012 |
| T1000090-v5 |
advanced LIGO baffle design using SIS |
Hiro Yamamoto |
Modelling
Core Optics
|
25 Apr 2012 |
| D0900607-v2 |
Voltage Controlled Oscillator: Rear panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D0900606-v2 |
Voltage Controlled Oscillator: Front panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D080703-v2 |
RF Source Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| D1000125-v2 |
RF Distribution Amplifier Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Apr 2012 |
| C940056-v1 |
Geotechnical Investigation of the LIGO Site, Livingston, Louisiana |
Dennis Coyne |
System Engineering
|
19 Apr 2012 |
| T1200172-v2 |
Installation and testing of L1 PSL table legs |
Riccardo DeSalvo et al. |
Commissioning
Laser Systems
|
15 Apr 2012 |
| D1000410-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_LEFT_SIDE_TRAY |
Craig Conley |
Suspensions
Auxiliary Optics
|
12 Apr 2012 |
| E1200222-x0 |
aLIGO, Slow Controls, Legacy |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1100605-v1 |
Addresses of EtherCAT Safety Terminals |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| G1100098-v1 |
EtherCAT (Beckhoff) for advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| G1200005-v1 |
EtherCAT for advanced LIGO |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200142-x0 |
aLIGO, Slow Controls, EtherCAT Communication Tester |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200306-x0 |
aLIGO, Slow Controls, Test Modules |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200352-x0 |
aLIGO, Slow Controls, Concentrators, RF Amplifiers |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200353-x0 |
aLIGO, Slow Controls, Concentrators, Demodulators |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200355-x0 |
aLIGO, Slow Controls, Concentrators, Legacy Photodetectors |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200356-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200357-x0 |
aLIGO, Slow Controls, Concentrators, Auxiliary Signals 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200363-x0 |
aLIGO, Slow Controls, Controllers, Picomotor Four Axes Breakout |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200378-x0 |
aLIGO, Slow Controls, Chassis, Empty |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200223-x0 |
aLIGO, Slow Controls, Overview |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200305-x0 |
aLIGO, Slow Controls, EtherCAT Hardware |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200370-x0 |
aLIGO, Slow Controls, Chassis, End Remote Access H1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200368-x0 |
aLIGO, Slow Controls, Chassis, Corner Remote Access H1 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200371-x0 |
aLIGO, Slow Controls, Chassis, ISC Common Mode |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200372-x0 |
aLIGO, Slow Controls, Chassis, Corner 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200373-x0 |
aLIGO, Slow Controls, Chassis, Corner 3 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| E1200376-x0 |
aLIGO, Slow Controls, Chassis, End 2 |
Daniel Sigg |
State Control and Monitoring
|
11 Apr 2012 |
| T080266-v1 |
Suspending optics on steel wire loops |
Norna Robertson et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| D080761-v4 |
Lower Blade, HSTS |
Bobby Moore et al. |
Final Design
Suspensions
|
08 Apr 2012 |
| D070321-v2 |
Earthquake Stop Bridge Crossbar, HLTS |
Derek Bridges |
Final Design
Suspensions
|
02 Apr 2012 |
| D1102175-v1 |
Fine Adjust Pivot Rod, CO2 Laser Projection Steering Mirror 2, H1-L1 |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
01 Apr 2012 |
| E0900006-v1 |
Review of HAM-ISI "Watchdog" safety software |
Sam Waldman et al. |
Seismic Isolation
Data and Computing
Safety
System Engineering
Data Acquisition System
Suspensions
|
01 Apr 2012 |
| E080462-v1 |
Infrasonic Microphone and PEM++ |
Gabor Szeifert et al. |
Data quality / vetoes
Data and Computing
Conceptual Design
Integration
Basic R&D
Calibration
Fabrication
Sensing and Control
Computing/archiving
Preliminary Design
Requirements
Observatory Facilities
Upgrades
Data Acquisition System
Other data analysis
System Test
|
01 Apr 2012 |
| E030647-v1 |
Advanced LIGO Detector System Interface Control Document (ICD) |
Dennis Coyne |
Observatory Facilities
Suspensions
Input Optics
Data Acquisition System
Sensing and Control
Final Design
Laser Systems
Seismic Isolation
Auxiliary Optics
Core Optics
Vacuum
Data and Computing
System Engineering
|
01 Apr 2012 |
| D1001973-v3 |
aLIGO TMS FOCUS SCREW |
Michael Miller et al. |
Auxiliary Optics
Fabrication
Final Design
|
29 Mar 2012 |
| D1101437-v1 |
aLIGO TCS SM1 H1-L1 Strong Back |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Preliminary Design
Fabrication
Final Design
|
28 Mar 2012 |
| D1101438-v1 |
H1-L1 SM1 Standard Angle Section, SS 316, 1.25" x 1.25" x .25" |
Mindy Jacobson |
Final Design
Fabrication
Preliminary Design
Vacuum
Auxiliary Optics
|
28 Mar 2012 |
| D1101287-v1 |
H1-L1 SM1 Standard T Section, SS 304, 1.5" x 1.5" x 3/16" |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
Fabrication
|
28 Mar 2012 |
| D0901419-v2 |
Lower Loop Wire Jig Assembly (HLTS) |
Derek Bridges |
Final Design
Suspensions
|
27 Mar 2012 |
| D1101295-v1 |
H1-L1 Steering Mirror 1 Support |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Final Design
Fabrication
Preliminary Design
|
25 Mar 2012 |
| D0900689-v2 |
Base Plate, Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
24 Mar 2012 |
| D0900680-v2 |
Blade Clamp (3.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900679-v2 |
Blade Clamp (3.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900678-v2 |
Blade Clamp (2.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900677-v2 |
Blade Clamp (2.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900676-v2 |
Blade Clamp (1.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900675-v2 |
Blade Clamp (1.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900674-v2 |
Blade Clamp (0.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900673-v3 |
Blade Clamp (3.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900672-v3 |
Blade Clamp (3.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900671-v3 |
Blade Clamp (2.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900670-v3 |
Blade Clamp (2.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900669-v3 |
Blade Clamp (1.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900668-v3 |
Blade Clamp (1.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900667-v3 |
Blade Clamp (0.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900665-v3 |
Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D080267-v2 |
Top Bridge, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D080268-v2 |
Base Plate, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D080265-v3 |
Upper Blade Bake Fixture, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
22 Mar 2012 |
| D1200448-v1 |
Septum Viewport Protector |
Michael Meyer |
Conceptual Design
Vacuum
|
21 Mar 2012 |
| D0901241-v2 |
Earthquake Stop Mount, Bridge, HLTS |
Derek Bridges |
Final Design
Suspensions
|
19 Mar 2012 |
| D070310-v2 |
Top Blade Guard Bar, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D070309-v2 |
Top Blade Guard Riser, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D1101718-v2 |
aLIGO Septum Viewport Blank |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D1101535-v3 |
aLIGO Septum Viewport Assy, non-wedged |
Dennis Coyne |
Vacuum
|
19 Mar 2012 |
| D1101117-v3 |
aLIGO, Septum Viewport Flange |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
19 Mar 2012 |
| D1101002-v3 |
aLIGO, high quality, 6" Viewport Clamp |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
19 Mar 2012 |
| D1101000-v3 |
aLIGO, high quality, .75 deg wedged, 6" Viewport Assembly |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
19 Mar 2012 |
| D0901286-v2 |
Secondary Metal Prism Breakoff, HLTS |
Michael Meyer et al. |
Suspensions
Final Design
|
18 Mar 2012 |
| D070338-v4 |
Metal Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D080238-v2 |
Collar, Lower, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080236-v2 |
Collar, Lower, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080234-v2 |
Collar, Lower, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080232-v2 |
Collar, Lower, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080183-v2 |
Collar, Lower, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080229-v2 |
Collar, Upper, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080227-v2 |
Collar, Upper, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080225-v2 |
Collar, Upper, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080223-v2 |
Collar, Upper, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080182-v2 |
Collar, Upper, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D030155-v2 |
Center Offset, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D970075-v2 |
Dumbbell Standoff |
Calum Torrie |
Suspensions
Final Design
|
17 Mar 2012 |
| D070336-v3 |
Main Section, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D070585-v4 |
Upper Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D070394-v3 |
Upper Clamp, Intermediate Wire, Outside, HLTS |
Michael Meyer |
Final Design
Suspensions
|
17 Mar 2012 |
| D030149-v2 |
Intermediate Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070405-v3 |
Lower Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D070406-v3 |
Lower Clamp, Intermediate Wire, Outside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080263-v2 |
Additional Mass Disk, 150g |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Mar 2012 |
| D070333-v2 |
Additional Mass Disk, 100g |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Mar 2012 |
| D0901405-v2 |
Additional Mass Disk, 50g |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Mar 2012 |
| D030139-v2 |
Roll Offset, T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D020615-v4 |
Lower Blade, HLTS |
Michael Meyer et al. |
Final Design
Suspensions
|
16 Mar 2012 |
| D020652-v2 |
C-Clamp, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| D070341-v3 |
Upper Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| D020617-v2 |
Upper Blade, HLTS |
Calum Torrie et al. |
Final Design
Suspensions
|
16 Mar 2012 |
| D070331-v3 |
Shim, 1.0mm, Upper Blade, HLTS |
Derek Bridges |
Final Design
Suspensions
|
16 Mar 2012 |
| T0900043-v11 |
Optical Layout and Parameters for the Advanced LIGO Cavities |
Muzammil Arain |
System Engineering
Core Optics
Sensing and Control
Input Optics
|
16 Mar 2012 |
| D070460-v2 |
Earthquake Stop Mount, Long, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D070322-v2 |
Earthquake Stop Bracket, Long, HLTS |
Derek Bridges |
Final Design
Suspensions
|
14 Mar 2012 |
| D070319-v2 |
Earthquake Stop Assembly, Bridge, HLTS |
Derek Bridges |
Final Design
Suspensions
|
14 Mar 2012 |
| D0901553-v4 |
Lower AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Final Design
Suspensions
|
14 Mar 2012 |
| D0901552-v4 |
Upper AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
14 Mar 2012 |
| D080677-v4 |
Coil Holder Assembly, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
13 Mar 2012 |
| D1000409-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_RIGHT_SIDE_TRAY |
Craig Conley |
Auxiliary Optics
Suspensions
|
13 Mar 2012 |
| D1000408-v3 |
aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_LEFT_SIDE_BRACKET |
Craig Conley |
Auxiliary Optics
|
13 Mar 2012 |
| D1000407-v3 |
aLIGO_OSEMS_INTERMIDIATE_SUPPORT_RIGHT_SIDE_BRACKET |
Craig Conley |
Auxiliary Optics
|
13 Mar 2012 |
| D070335-v6 |
Upper Mass Assembly, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
12 Mar 2012 |
| D070334-v4 |
Intermediate Mass Assembly, HLTS |
Derek Bridges |
Final Design
Suspensions
|
12 Mar 2012 |
| D070328-v2 |
Rotating Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D070326-v4 |
Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D070374-v2 |
Mounting Pad Body, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D1200443-x0 |
Short Support Strut, aLIGO TCS H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Installation
Final Design
|
12 Mar 2012 |
| D1200439-x0 |
Long Support Strut, aLIGO TCS H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Final Design
Auxiliary Optics
Installation
Vacuum
|
12 Mar 2012 |
| S0900294-v4 |
TCS Interface Commbox |
Christopher Guido |
Auxiliary Optics
|
09 Mar 2012 |
| D1200419-x0 |
Damper Nut Plate |
Mindy Jacobson |
Vacuum
Installation
Auxiliary Optics
Fabrication
|
08 Mar 2012 |
| D1200401-x0 |
Long Side Stiffener, aLIGO TCS Steering Mirror Assembly for H2, BSC's 7 & 8 |
Mindy Jacobson |
Installation
Auxiliary Optics
Vacuum
Fabrication
|
06 Mar 2012 |
| D1200398-x0 |
Short Side Stiffener, aLIGO TCS Steering Mirror Assembly for H2, BSC's 7 & 8 |
Mindy Jacobson |
Fabrication
Vacuum
Auxiliary Optics
Installation
|
06 Mar 2012 |
| D080727-v3 |
Earthquake Stop Assembly, Long Bracket, HLTS |
Derek Bridges |
Final Design
Suspensions
|
29 Feb 2012 |
| D080726-v3 |
Earthquake Stop Assembly, Long Mount, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
29 Feb 2012 |
| D1100453-v2 |
aLIGO TCS 1/10 Lamda Flat 4'' Dia. Mirror, CO2 Laser Projection |
Austin Langley et al. |
Final Design
Preliminary Design
Vacuum
Auxiliary Optics
|
28 Feb 2012 |
| D070327-v2 |
Base Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
23 Feb 2012 |
| D1100449-x0 |
aLigo TCS Mirror Mount, CO2 Laser Projection |
Austin Langley et al. |
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
|
23 Feb 2012 |
| D070332-v6 |
HLTS Suspension Assembly |
Derek Bridges |
Preliminary Design
Suspensions
|
21 Feb 2012 |
| T0900325-v2 |
H1 Squeezer Noise Model |
Daniel Sigg et al. |
Basic R&D
Sensing and Control
|
16 Feb 2012 |
| T0900020-v3 |
Checks on initial batch of production Quad blades |
Justin Greenhalgh |
Suspensions
|
12 Feb 2012 |
| T1200079-x0 |
LLO Beam Tube Enclosure Inspection Report |
Michael Meyer |
Vacuum
Operations
|
10 Feb 2012 |
| D060311-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, FRONT AND REAR PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
Auxiliary Optics
|
09 Feb 2012 |
| D0901461-v2 |
HLTS Magnet Placement Fixture, Intermediate Mass |
Derek Bridges |
Suspensions
Final Design
|
09 Feb 2012 |
| D080702-v2 |
RF Source Assembly |
Daniel Sigg |
Sensing and Control
|
02 Feb 2012 |
| D1100285-v3 |
aLIGO TCS Fixture Retainer, H2 UHV Steering Mirror Assembly |
Mindy Jacobson et al. |
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
01 Feb 2012 |
| E0900247-v3 |
Coated Substrate, ALIGO Power Recycling Mirror 2 |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
30 Jan 2012 |
| E0900245-v3 |
Coated Substrate, ALIGO Power Recycling Mirror |
Rodica Martin |
Core Optics
Final Design
Input Optics
|
30 Jan 2012 |
| E0900248-v4 |
Coated Substrate, ALIGO Signal Recycling Mirror 2 |
Rodica Martin |
Final Design
Input Optics
Core Optics
|
30 Jan 2012 |
| D1001727-v3 |
aLIGO TCS CO2 Laser In-Vacuum Steering Mirror |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
|
24 Jan 2012 |
| D1200122-v1 |
Handle for Cleaning the H2 UHV 12" Steering Mirror |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Cleaning
|
24 Jan 2012 |
| D070008-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE, SPACING PLUG |
Joe ODell et al. |
Fabrication
Final Design
System Engineering
|
23 Jan 2012 |
| T1100062-v6 |
aLIGO I&Q Demodulator Test Procedure |
Rich Abbott et al. |
Sensing and Control
Subsystem Test
|
09 Jan 2012 |
| D1003209-v2 |
aLIGO TCS Clamping Flange, CO2 Laser Projection Viewport Enclosure |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
|
09 Jan 2012 |
| D1102455-x0 |
Box Section Support Tube, TCS CO2P SM2, H1/L1 |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Fabrication
Preliminary Design
|
06 Jan 2012 |
| D0901079-v2 |
HLTS Upper Wire Lower Clamp Assembly |
Derek Bridges |
Preliminary Design
Suspensions
|
23 Dec 2011 |
| D1102431-x0 |
aLIGO TCS CO2P SM2 ASSY LONG SUPPORT |
Mindy Jacobson |
Preliminary Design
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
22 Dec 2011 |
| D1003222-v2 |
aLIGO TCS Periscope Flange, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
21 Dec 2011 |
| D1003214-v2 |
aLIGO TCS Top Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
|
20 Dec 2011 |
| D1003206-v3 |
aLIGO TCS Viewports Enclosure Front Wall, CO2 Laser Projection |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Final Design
Preliminary Design
|
19 Dec 2011 |
| D0902523-v2 |
OVERSIZE LOCATING SLEEVE, ETM, COC CONTAINER |
Kurt Buckland |
System Engineering
|
19 Dec 2011 |
| D1002386-v3 |
Mechanical Plan - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
16 Dec 2011 |
| D1003213-v2 |
aLIGO TCS Side Optomech Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Vacuum
Auxiliary Optics
|
15 Dec 2011 |
| D1101547-v1 |
H2 Viewport Camera Mirror Fixture |
Alexander Lynch |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
13 Dec 2011 |
| D1100250-v1 |
aLIGO TCS Rear Mounting Plate, CO2 Laser Projection Viewport Cover |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
29 Nov 2011 |
| D070125-v3 |
LHO CDS Lans and Gateways |
David Barker |
Installation
Observatory Facilities
|
29 Nov 2011 |
| D020682-v2 |
HSTS/OMC Lower Blade Clamp, Shim, 1mm |
Bobby Moore |
Suspensions
Final Design
|
22 Nov 2011 |
| D070052-v2 |
OMC Connector Bracket |
Janeen Romie |
Suspensions
|
21 Nov 2011 |
| D1101509-v2 |
Pico Motor Driver Chassis |
Gerardo Moreno et al. |
Data and Computing
|
09 Nov 2011 |
| D1100053-x0 |
aLIGO TCS HWS Viewport Enclosure Assembly, Y-arm |
Cheryl Vorvick et al. |
Auxiliary Optics
Vacuum
Fabrication
Final Design
Preliminary Design
|
01 Nov 2011 |
| D1001755-v2 |
aLIGO TCS RH, Lower Custom 25D Connector Bracket |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
|
25 Oct 2011 |
| T1000105-v5 |
Cleaning Procedures for Viton and PFA encapsulated Viton O-rings |
Margot Hennig |
Core Optics
|
20 Oct 2011 |
| D1001223-v3 |
Lower Structure Assembly Tooling - Top Plate Small |
Kurt Buckland |
System Engineering
Suspensions
|
18 Oct 2011 |
| D0902580-v2 |
Squeezer Controls Chassis C |
Daniel Sigg |
Data Acquisition System
|
13 Oct 2011 |
| D0902087-v3 |
Positioning Standoff, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
11 Oct 2011 |
| T1100309-v5 |
LSC Instrument Science White Paper |
Rana Adhikari et al. |
Suspensions
Sensing and Control
Core Optics
Seismic Isolation
Basic R&D
Laser Systems
|
10 Oct 2011 |
| D0900681-v2 |
Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0902452-v2 |
Standoff Side Plate, Short, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902445-v2 |
Standoff Plate, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
08 Oct 2011 |
| D0901551-v4 |
Lower AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902024-v4 |
Upper AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0901436-v2 |
Wire Clamp Mount, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901435-v3 |
Wire Start Clamp, Inside, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
08 Oct 2011 |
| D0901135-v2 |
Mounting Block, Lower Clamp, Upper Wire, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D070449-v2 |
Coil Holder (Tablecloth), HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0900688-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900687-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900686-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900685-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900684-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900683-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900682-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900696-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900695-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900694-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900693-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900692-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900691-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900690-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D070320-v2 |
Mounting Bracket, Coil Holder, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D1000393-v2 |
aLIGO INTERMEDIATE MASS TOP PLATE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
06 Oct 2011 |
| G1101141-v1 |
NEW CONTROL AND DATA ACQUISITION SYSTEM IN THE ADVANCED LIGOPROJECT |
Rolf Bork et al. |
Data Acquisition System
|
05 Oct 2011 |
| P1100052-v3 |
New Control and Data Acquisition System in the Advanced LIGO Project |
Rolf Bork et al. |
Data Acquisition System
|
05 Oct 2011 |
| D1101256-v2 |
aLigo TCS 2'' Dia. Enhanced Aluminum Mirror, CO2 Laser Projection, Camera |
Alexander Lynch |
Auxiliary Optics
Vacuum
Preliminary Design
Fabrication
Final Design
|
05 Oct 2011 |
| E1100983-x0 |
DCN, Custom Parts, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Mindy Jacobson |
Operations
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
04 Oct 2011 |
| E1100656-v1 |
Formal Drawing Tree & BOM, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Alexander Lynch et al. |
Preliminary Design
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
04 Oct 2011 |
| E1100655-v1 |
DCN, aLIGO TCS VIEWPORT ENCLOSURE ASSEMBLY, H2 CO2 LASER PROJECTION |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Preliminary Design
|
04 Oct 2011 |
| D1100263-v3 |
aLIGO TCS Fixture, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
29 Sep 2011 |
| D1101272-v2 |
aLIGO TCS H2 UHV Mirror Splash Cover |
Mindy Jacobson |
Cleaning
Auxiliary Optics
Vacuum
System Engineering
Fabrication
|
29 Sep 2011 |
| D1101866-v1 |
Shim, .125" Thick |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Installation
Fabrication
|
29 Sep 2011 |
| D1100267-v5 |
aLIGO TCS Fixture Short Support Gusset, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
28 Sep 2011 |
| D1100266-v5 |
aLIGO TCS Fixture Tall Support Gusset, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
28 Sep 2011 |
| E1100901-v1 |
DCN, aLIGO Ring Heater segment assemblies, production lot #2 |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Fabrication
|
23 Sep 2011 |
| D1101831-v1 |
EtherCAT 4km H1 Remote Access End |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101829-v1 |
EtherCAT Panel End/Safety Network |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101832-v1 |
Corner MSR Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101833-v1 |
End Link Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101828-v1 |
EtherCAT Panel Corner/Safety Network |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D1101827-v1 |
EtherCAT Panel Corner/Safety Extensions |
Daniel Sigg |
Data Acquisition System
|
21 Sep 2011 |
| D0900999-v3 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 2 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
19 Sep 2011 |
| D1101800-x0 |
HWS Opto Mechanical Layout, ITMy, HAM10 |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Subsystem Test
Auxiliary Optics
System Engineering
Vacuum
|
12 Sep 2011 |
| D1101799-x0 |
HWS Opto Mechanical Layout, ITMx, HAM10 |
Mindy Jacobson et al. |
Fabrication
Final Design
Preliminary Design
System Engineering
Vacuum
Subsystem Test
Auxiliary Optics
|
12 Sep 2011 |
| D1101798-x0 |
aLIGO TCS HWS Optics Assy, HAM10 |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
System Engineering
Vacuum
Auxiliary Optics
Subsystem Test
|
12 Sep 2011 |
| T1100346-v2 |
Design of the Elastomeric Sealed, High Quality, Viewports |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
10 Sep 2011 |
| D080124-v3 |
Prism Breakoff, Lower Wire, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D070438-v4 |
Clamp, Lower Loop Wire, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D030148-v2 |
Lower Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D030156-v2 |
Side Offset, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D080181-v2 |
Intermediate Mass Changer Assembly, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D020624-v3 |
Lower Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020610-v3 |
Lower Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020611-v4 |
Upper Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070329-v2 |
Pull Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070330-v2 |
Push Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| E1100771-v1 |
DCN, Post-Machined Vent Holes, aLIGO TCS H2 In-Vac Mirror |
Mindy Jacobson |
Auxiliary Optics
Cleaning
Vacuum
Fabrication
|
02 Sep 2011 |
| D1000632-v2 |
aLIGO TOP ADD MASS BAR |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
01 Sep 2011 |
| E1100817-x0 |
DCN: Initial Release of Septum Viewport Blank (aLIGO) |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
29 Aug 2011 |
| D0900628-v2 |
Side Bracket, Mounting Pad, HLTS |
Derek Bridges |
Suspensions
Final Design
|
26 Aug 2011 |
| D0900626-v2 |
Mounting Pad Assembly, HLTS |
Derek Bridges |
Final Design
Suspensions
|
26 Aug 2011 |
| D070537-v2 |
Structure, HLTS |
Derek Bridges |
Final Design
Suspensions
|
26 Aug 2011 |
| D1101255-v2 |
aLIGO TCS Ring Heater Replacement TM Crutch Support |
Mindy Jacobson |
Auxiliary Optics
Vacuum
System Engineering
Final Design
Fabrication
|
25 Aug 2011 |
| D1003204-v3 |
aLIGO TCS Viewports Enclosure Front Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
23 Aug 2011 |
| D1003193-v3 |
aLIGO TCS Viewport Enclosure Assembly, H2 CO2 Laser Projection |
Cheryl Vorvick et al. |
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
|
22 Aug 2011 |
| D1003210-v2 |
aLIGO TCS Viewports Enclosure Side Optomech Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
22 Aug 2011 |
| D1101235-v2 |
aLIGO TCS H2 Viewport Camera Mirror Assembly |
Alexander Lynch |
Vacuum
Auxiliary Optics
Basic R&D
Final Design
Preliminary Design
|
22 Aug 2011 |
| T1100448-x0 |
Input Optics Power Control |
Rich Abbott et al. |
Final Design
Input Optics
|
22 Aug 2011 |
| D1003221-v3 |
aLIGO TCS Viewport Enclosure Lower Wall Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
22 Aug 2011 |
| D1003220-v2 |
aLIGO TCS Bottom Wall, CO2 Laser Projection VP Enclosure |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
|
22 Aug 2011 |
| D0900627-v2 |
Front Bracket, Mounting Pad, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Aug 2011 |
| E1000083-v6 |
Specification for Enameled Steel to be used in the LIGO Ultra-High Vacuum System |
Heidy Kelman et al. |
Fabrication
Auxiliary Optics
|
19 Aug 2011 |
| D1101145-v1 |
TOP PERISCOPE MOUNT ASSEMBLY, H2 CO2P |
Alexander Lynch |
Auxiliary Optics
Vacuum
Final Design
Fabrication
Preliminary Design
|
18 Aug 2011 |
| C1105429-v3 |
SOW: Pilot Test, Vacuum Component Bakeout and Residual Gas Assay |
Richard Bagley et al. |
Integration
Vacuum
Cleaning
Procurements
Fabrication
|
17 Aug 2011 |
| E1100762-v1 |
D1100884 Slow Controls Communication Tester Wiring |
Rodney Dodd |
Final Design
Data Acquisition System
|
16 Aug 2011 |
| T1000422-v1 |
aLIGO IO Expansion Chassis Assembly Procedure |
Jay Heefner et al. |
Data Acquisition System
Fabrication
|
16 Aug 2011 |
| D1000656-v2 |
aLIGO TOP ADD MASS SIDE SLOTTED BAR |
Ignacio Romero |
Auxiliary Optics
Conceptual Design
|
12 Aug 2011 |
| D1000655-v2 |
aLIGO TOP ADD MASS TOP SLOTTED BAR |
Ignacio Romero |
Auxiliary Optics
Conceptual Design
|
12 Aug 2011 |
| D1100419-v3 |
EtherCAT Adapters for Picomotor |
Daniel Sigg |
Sensing and Control
|
04 Aug 2011 |
| E1100733-v1 |
6 inch Vacuum Viewport Window, uncoated |
Lisa Austin |
Vacuum
Auxiliary Optics
|
02 Aug 2011 |
| D1101548-v1 |
Uncoated high quality, non-wedged, 6" Viewport, Optic |
Lisa Austin |
Vacuum
Auxiliary Optics
|
02 Aug 2011 |
| D1000633-v3 |
aLIGO TOP ADD MASS TEE |
Ignacio Romero |
Conceptual Design
Auxiliary Optics
|
28 Jul 2011 |
| D090433-v2 |
aLIGO SUS, QUAD TRANSPORT PAD L BAR |
Joe ODell |
Final Design
Suspensions
|
27 Jul 2011 |
| D1003215-v1 |
aLIGO TCS Viewports Enclosure Side Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Final Design
Preliminary Design
|
27 Jul 2011 |
| D1003217-v1 |
aLIGO TCS Viewports Enclosure Back Cover Assembly, CO2 Laser Projection |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
27 Jul 2011 |
| D1100494-v2 |
aLigo TCS .25'' Thick Optical Window Clam Shell Assy |
Alexander Lynch et al. |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
|
26 Jul 2011 |
| D1100493-v1 |
aLigo TCS .25'' Thick ZnSe Window Clam Shell Assy |
Alexander Lynch et al. |
Final Design
Preliminary Design
Vacuum
Auxiliary Optics
|
26 Jul 2011 |
| D1100540-v1 |
aLIGO TCS .5'' Thick Optical Window |
Alexander Lynch et al. |
Vacuum
Auxiliary Optics
Preliminary Design
Final Design
Fabrication
|
26 Jul 2011 |
| D1003208-v1 |
aLIGO TCS Mounting Plate, CO2 Laser Projection Viewport Cover |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
26 Jul 2011 |
| D080631-v3 |
O-Ring, 3in Viewports |
Douglas Cook et al. |
Vacuum
Fabrication
Risk Management
|
26 Jul 2011 |
| D1100413-v1 |
aLIGO TCS Viewports Enclosure Stress Relief Bar for Thermocouple, CO2 Laser Projection |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Final Design
Preliminary Design
|
26 Jul 2011 |
| D1003216-v1 |
aLIGO TCS Side Cover Wall, CO2 Laser Projection VP Enclosure |
Phil Willems et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
26 Jul 2011 |
| D1003218-v1 |
aLIGO TCS Back Cover Wall, CO2 Laser Projection VP Enclosure |
Ayodele Cole et al. |
Final Design
Preliminary Design
Vacuum
Auxiliary Optics
|
25 Jul 2011 |
| D070548-v3 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM MASS STOP, BOTH CHAINS |
Joe ODell |
Suspensions
|
21 Jul 2011 |
| E1100659-v1 |
DCN, aLIGO TCS Ring Heater Replacement Fixture |
Mindy Jacobson |
Fabrication
Upgrades
Vacuum
System Engineering
Auxiliary Optics
Installation
|
20 Jul 2011 |
| T1000482-v2 |
BOSEMs for Transmon suspension tests |
Norna Robertson |
Subsystem Test
Auxiliary Optics
Suspensions
|
18 Jul 2011 |
| D1003219-v1 |
aLIGO TCS CO2 Laser Projection Viewport Enclosure Mounting Rod, Side-to-Back Covers |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
18 Jul 2011 |
| E1100624-v1 |
Specification: Pulse-Purge Vacuum Baking for Polymers |
Dennis Coyne |
Vacuum
|
15 Jul 2011 |
| D1000394-v2 |
aLIGO INTERMEDIATE MASS BOTTOM PLATE |
Ignacio Romero |
Auxiliary Optics
Conceptual Design
|
13 Jul 2011 |
| D1101268-v1 |
aLIGO TCS Ring Heater Replacement TM Crutch Stiffener |
Mindy Jacobson |
Fabrication
Final Design
Vacuum
System Engineering
Auxiliary Optics
|
12 Jul 2011 |
| D1101254-v1 |
aLIGO TCS Ring Heater Replacement TM Crutch |
Mindy Jacobson |
Vacuum
System Engineering
Auxiliary Optics
Fabrication
Final Design
|
12 Jul 2011 |
| E1100660-v1 |
BOM, aLIGO TCS Ring Heater Replacement Fixture Assembly |
Mindy Jacobson |
Final Design
Upgrades
Vacuum
System Engineering
Installation
Auxiliary Optics
|
12 Jul 2011 |
| D1101005-v1 |
aLIGO, high quality, .75 deg wedged, 6" Viewport, Optic |
Dennis Coyne |
Auxiliary Optics
Vacuum
|
11 Jul 2011 |
| D080180-v1 |
AdL SUS LASTI Noise Prototype Controls Wiring |
Jay Heefner |
Suspensions
Installation
|
11 Jul 2011 |
| D060294-v1 |
LASTI AdL SUS Triple Controls Wiring |
Jay Heefner |
Suspensions
Installation
|
11 Jul 2011 |
| D1101265-v1 |
12" Aluminum Flange Cover |
Michael Meyer |
Vacuum
|
06 Jul 2011 |
| D1100514-v1 |
10" Aluminum Flange Cover |
Michael Meyer |
Vacuum
Final Design
|
05 Jul 2011 |
| E1100612-v1 |
H2 PSL Bill of Materials |
Jose Puente |
Laser Systems
Installation
|
05 Jul 2011 |
| D1000631-v3 |
aLIGO TOP ADD MASS TOWER |
Ignacio Romero |
Auxiliary Optics
Conceptual Design
|
30 Jun 2011 |
| E070273-v1 |
Process Traveler - HAM cable cleaning |
Stephany Foley et al. |
Vacuum
Seismic Isolation
|
23 Jun 2011 |
| T1100340-v1 |
Realtime Code Generator (RCG) post build script |
Joseph Betzwieser et al. |
Data Acquisition System
|
23 Jun 2011 |
| C1104716-v2 |
Statement of Work: H2 PSL Laser Diode and Chiller Rooms |
Richard Savage |
Procurements
Laser Systems
Fabrication
|
22 Jun 2011 |
| D060383-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060384-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060328-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, 3/8-16 UNC T NUT Based on Wixroyd 2418.W120 |
Joe ODell et al. |
Final Design
Suspensions
|
21 Jun 2011 |
| C1000270-v7 |
aLIGO TCS CO2 Laser Provision SOW |
Mindy Jacobson |
Auxiliary Optics
Procurements
Fabrication
|
15 Jun 2011 |
| D1002926-v2 |
Module-E, BSC Cartridge installation, aLIGO |
Sam Barnum et al. |
Installation
Observatory Facilities
|
15 Jun 2011 |
| T1100323-v1 |
aLIGO Modification of SpectraCom IRIG-B Breakout Adapter |
Edmond Merilh |
Data Acquisition System
Fabrication
|
15 Jun 2011 |
| D1101098-v1 |
H2 Laser Diode Room and Chiller Room Architectural Drawings |
Richard Savage et al. |
Final Design
Laser Systems
|
13 Jun 2011 |
| D070575-v3 |
Base Plate, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
11 Jun 2011 |
| E1100521-x0 |
DCN: Initial Release of aLIGO High Quality Viewport Windows (wedged and non-wedged) |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
09 Jun 2011 |
| D1101091-v1 |
OBSOLETE |
Dennis Coyne |
Vacuum
Auxiliary Optics
|
09 Jun 2011 |
| D1001720-v2 |
QPD Enclosure v2 |
Rich Abbott et al. |
Fabrication
Data Acquisition System
|
03 Jun 2011 |
| D1100884-v1 |
EtherCAT Communication Tester |
Daniel Sigg |
Data Acquisition System
|
28 May 2011 |
| D1100890-v1 |
EtherCAT Communication Tester Front Panel |
Daniel Sigg |
Data Acquisition System
|
28 May 2011 |
| S1103474-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103473-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103472-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103471-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103470-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103469-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103468-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103467-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103466-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| S1103465-x0 |
Slow controls concentrator: serial ports |
Daniel Sigg |
Data Acquisition System
|
26 May 2011 |
| D080503-v3 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, SHEAR PLATE |
Joe ODell et al. |
Suspensions
|
24 May 2011 |
| T1000505-v2 |
Test Procedure for RF Frequency Divider |
Daniel Sigg |
Sensing and Control
|
24 May 2011 |
| E1100461-v1 |
Test Procedure for RF Frequency Divide-by-8 |
Daniel Sigg et al. |
Sensing and Control
|
24 May 2011 |
| E1100460-v1 |
RF Frequency Divide-by-Eight |
Daniel Sigg |
Sensing and Control
|
23 May 2011 |
| T1100276-v1 |
Modeling an Optical Spring |
Tobin Fricke |
Laser Systems
Sensing and Control
|
17 May 2011 |
| T0900239-v1 |
AOS: Optical Lever and Viewport Conceptual Design |
Robert Schofield et al. |
Auxiliary Optics
|
19 May 2009 |
| D1100893-v1 |
EtherCAT Communication Tester Side Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100892-v1 |
EtherCAT Communication Tester Top/Bottom Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100891-v1 |
EtherCAT Communication Tester Rear Panel |
Daniel Sigg |
Data Acquisition System
|
13 May 2011 |
| D1100793-v2 |
EtherCAT Panel Temperature |
Daniel Sigg |
Data Acquisition System
|
10 May 2011 |
| E1100425-v1 |
Test Procedure for Slow Controls Concentrator Serial Ports |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100874-v1 |
Serial Adapter Cable (Testing) |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100872-v1 |
Serial Loopback Cable (Testing) |
Daniel Sigg |
Data Acquisition System
|
09 May 2011 |
| D1100868-v1 |
Picomotor Driver PS Assembly Spacer |
Daniel Sigg |
Sensing and Control
|
09 May 2011 |
| E020247-v1 |
Document Change Notice for D980400 |
Hugh Radkins et al. |
Document Migration
Laser Systems
|
08 May 2011 |
| M060056-v2 |
Advanced LIGO Reference Design |
David Shoemaker |
Detector
Conceptual Design
Reports
|
08 May 2011 |
| E0900124-x0 |
AFWFS parts for HAM6 Traveler |
Sam Waldman |
Vacuum
Installation
|
07 May 2011 |
| G1100452-v5 |
PSL Tech Status |
Benno Willke |
Laser Systems
Meeting
Reviews
|
05 May 2011 |
| D1100638-v1 |
Slow controls concentrator EtherCAT: serial ports |
Daniel Sigg |
Data Acquisition System
|
05 May 2011 |
| G1100458-v3 |
DAQ Technical Status - NSF Review April 25-27, 2011 |
Rolf Bork |
Data Acquisition System
Meeting
|
05 May 2011 |
| G1100462-v2 |
ISC Technical Status - NSF 2011 |
Peter Fritschel |
Sensing and Control
Reviews
|
05 May 2011 |
| G1100445-v3 |
Plenary 5 Integration Planning - NSF 2011 |
Valery Frolov et al. |
Sensing and Control
|
05 May 2011 |
| E1000678-v2 |
Optical Lever Heights above the Floor |
Dennis Coyne |
System Engineering
Auxiliary Optics
Installation
Final Design
|
04 May 2011 |
| D1002346-v1 |
Electrical Connector Nut Plate |
Ayodele Cole |
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
04 May 2011 |
| T1100246-v1 |
iLIGO L1, H1 and H2 Interferometer Resonances |
Dennis Coyne |
Input Optics
Suspensions
Commissioning
Seismic Isolation
Core Optics
Auxiliary Optics
System Engineering
|
04 May 2011 |
| G1100491-v4 |
IO Input Optics Technical Status |
David Reitze et al. |
Input Optics
Reviews
|
30 Apr 2011 |
| D1100634-v1 |
Slow controls concentrator front panel: serial ports |
Daniel Sigg |
Data Acquisition System
|
21 Apr 2011 |
| D1100695-v1 |
Slow controls concentrator top/bottom panels: demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100755-v1 |
Slow controls concentrator rear panel: ASC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100754-v1 |
Slow controls concentrator front panel: ASC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100694-v1 |
Slow controls concentrator rear panel: LSC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| D1100693-v1 |
Slow controls concentrator front panel: LSC demodulator |
Daniel Sigg |
Sensing and Control
|
20 Apr 2011 |
| G1100174-v1 |
DC Readout in Enhanced LIGO |
Tobin Fricke |
Sensing and Control
|
19 Apr 2011 |
| D0902062-v2 |
Vertical Locating Block, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
18 Apr 2011 |
| D1100710-x0 |
aLIGO TCS H2 Top Periscope Mount Support |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
|
18 Apr 2011 |
| D1100709-x0 |
aLIGO TCS H2 Top Periscope Support Fixture |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
|
18 Apr 2011 |
| D1100708-x0 |
aLIGO TCS H2 CO2P Top Periscope Mount Assembly |
Mindy Jacobson |
Preliminary Design
Vacuum
Auxiliary Optics
|
18 Apr 2011 |
| D1100325-v1 |
Picomotor Driver Rear Panel |
Daniel Sigg |
Sensing and Control
|
17 Apr 2011 |
| D1100324-v1 |
Picomotor Driver Front Panel |
Daniel Sigg |
Sensing and Control
|
17 Apr 2011 |
| D1100636-v1 |
Slow controls concentrator top/bottom panels: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D1100635-v1 |
Slow controls concentrator rear panel: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D1100633-v1 |
Slow controls concentrator interface: serial ports |
Daniel Sigg |
Data Acquisition System
|
16 Apr 2011 |
| D0902068-v2 |
Standoff Ring, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
16 Apr 2011 |
| D030320-v4 |
HEPI SPRING ASSEMBLY, aLIGO BSC |
Andy Stein |
Seismic Isolation
Final Design
|
15 Apr 2011 |
| D1100666-v1 |
Corner MSR Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100667-v1 |
End Link Controls Chassis Name Plate |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100665-v1 |
EtherCAT Panel Corner/Extensions |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| E1100333-v1 |
Test Procedure for Slow Controls Concentrator RF Amplifiers |
Daniel Sigg |
Sensing and Control
|
12 Apr 2011 |
| D1100630-v1 |
EtherCAT Panel Fiber/PTP |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100661-v1 |
EtherCAT Panel Serial Concentrator |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| D1100662-v1 |
EtherCAT Panel Safety Contacts |
Daniel Sigg |
Data Acquisition System
|
12 Apr 2011 |
| E1000382-v8 |
Material Qualification Queue |
Dennis Coyne |
Vacuum
System Engineering
|
11 Apr 2011 |
| T080021-v3 |
UK UIM Driver Pre-Production Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
11 Apr 2011 |
| D060314-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, LEFT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D060312-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, RIGHT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D1002961-v2 |
ISC CM Controls Chassis |
Daniel Sigg |
Sensing and Control
|
07 Apr 2011 |
| E1000670-v2 |
ISC CM Controls Chassis Wiring Diagram |
Daniel Sigg |
Sensing and Control
|
07 Apr 2011 |
| D0902554-v3 |
EtherCAT Chassis Rear Panel |
Daniel Sigg |
Data Acquisition System
|
07 Apr 2011 |
| D1100259-v1 |
Slow controls concentrator interface: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
06 Apr 2011 |
| D1100599-v1 |
Slow controls concentrator side panels: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| D1100598-v1 |
Slow controls concentrator top/bottom panels: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| D1100261-v1 |
Slow controls concentrator rear panel: RF amplifiers |
Daniel Sigg |
Sensing and Control
|
05 Apr 2011 |
| E1100023-v1 |
Material Qualification RGA Test Results: EG&G YAG-444A Photodiode |
Dennis Coyne |
Vacuum
Sensing and Control
|
04 Apr 2011 |
| T1100195-v1 |
Acromag Binary IO Chassis Pin Map |
Rich Abbott |
Sensing and Control
Final Design
|
31 Mar 2011 |
| D1100477-v1 |
aLIGO TCS Viewports Spherical Bearing Periscope Assembly, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
30 Mar 2011 |
| D080378-v2 |
Clamp Sleeve, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080377-v3 |
Clamp Washer Plate, HAM Support Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080376-v3 |
Clamp Preload, HAM Support Tube |
Michael Hillard |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080375-v2 |
Clamp Cap, HAM Support Tube |
Andy Stein |
Final Design
Seismic Isolation
|
30 Mar 2011 |
| D080374-v2 |
Clamp Base, HAM Support Tube |
Andy Stein |
Final Design
Seismic Isolation
|
30 Mar 2011 |
| D080459-v2 |
HAM Crossbeam Connector HEPI Plate |
Andy Stein |
Final Design
Seismic Isolation
|
30 Mar 2011 |
| D080458-v2 |
HAM Crossbeam Connector Tube |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080460-v2 |
HAM Crossbeam Connector Mount Plate |
Andy Stein |
Final Design
Seismic Isolation
|
30 Mar 2011 |
| D080461-v2 |
HAM Crossbeam Connector Gusset |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080453-v2 |
HAM Straight Crossbeam Tube |
Andy Stein |
Final Design
Seismic Isolation
|
30 Mar 2011 |
| D080454-v2 |
HAM Crossbeam Clamp Plate |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| D080455-v2 |
HAM Crossbeam Mounting Flange |
Andy Stein |
Seismic Isolation
Final Design
|
30 Mar 2011 |
| E970130-v4 |
Material, Process, Handling and Shipping Specification for Fluorel Parts |
Dennis Coyne |
Fabrication
Vacuum
System Engineering
|
29 Mar 2011 |
| D020002-v4 |
Spring Mounting Plate, Pre-Isolator |
Andy Stein et al. |
Final Design
Seismic Isolation
|
29 Mar 2011 |
| D020408-v3 |
Double Start Counterwound Spring Asm |
Andy Stein |
Final Design
Seismic Isolation
|
29 Mar 2011 |
| D020195-v3 |
HEPI CROSSBEAM FOOT |
Andy Stein et al. |
Seismic Isolation
Final Design
|
29 Mar 2011 |
| D080699-v2 |
Crossbeam Washer Plate #2 |
Andy Stein et al. |
Final Design
Seismic Isolation
|
28 Mar 2011 |
| D080698-v2 |
Crossbeam Washer Plate #1 |
Andy Stein et al. |
Final Design
Seismic Isolation
|
28 Mar 2011 |
| D080700-v2 |
Crossbeam Washer Disc |
Andy Stein et al. |
Final Design
Seismic Isolation
|
28 Mar 2011 |
| D080465-v2 |
HAM Crossbeam HEPI Adapter |
Andy Stein et al. |
Seismic Isolation
Final Design
|
28 Mar 2011 |
| D1002312-v3 |
aLIGO TCS UHV AZ Fine Adjust Pivot Plate, BSC7 |
Mindy Jacobson et al. |
Preliminary Design
Auxiliary Optics
Vacuum
|
28 Mar 2011 |
| D1002455-v3 |
aLIGO TCS UHV AZ Fine Adjust Pivot Plate, BSC8 |
Mindy Jacobson |
Preliminary Design
Vacuum
Auxiliary Optics
|
28 Mar 2011 |
| D060359-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Additional Mass |
Joe ODell |
Suspensions
|
28 Mar 2011 |
| D1002399-v3 |
Room Layout / Framing Plan - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
22 Mar 2011 |
| D1002411-v3 |
Framing Plans and Elevations - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
22 Mar 2011 |
| D1002397-v3 |
Mechanical Plan and Schedules - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
22 Mar 2011 |
| D1002396-v3 |
Mechanical Plan - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
22 Mar 2011 |
| D1002398-v3 |
Mechanical Sections and Details - H2 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Laser Systems
Procurements
|
22 Mar 2011 |
| E0900410-v4 |
Vacuum Component List |
John Worden et al. |
Vacuum
|
21 Mar 2011 |
| D1100483-v1 |
4 Channel Differential to Single Ended Converter Front Panel Files |
Rich Abbott |
Sensing and Control
Final Design
|
18 Mar 2011 |
| D1100496-x0 |
aLIGO TCS Viewport Thermocouple |
Austin Langley |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
|
16 Mar 2011 |
| D1100484-v1 |
4 Channel Differential to Single Ended Converter Rear Panel Files |
Rich Abbott |
Final Design
Sensing and Control
|
16 Mar 2011 |
| D080496-v2 |
HAM HEPI CAGING ASSEMBLY |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 Mar 2011 |
| D080495-v2 |
HAM HEPI CAGING SIDE CAP |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 Mar 2011 |
| D080548-v2 |
HAM HEPI Horz Actuator Adapter 2 |
Andy Stein et al. |
Final Design
Seismic Isolation
|
10 Mar 2011 |
| D080547-v2 |
HAM HEPI Horz Actuator Adapter 1 |
Andy Stein et al. |
Final Design
Seismic Isolation
|
10 Mar 2011 |
| D1100452-x0 |
aLigo TCS Mirror Mount Base Support, CO2 Laser Projection |
Austin Langley et al. |
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
|
10 Mar 2011 |
| D1100451-x0 |
aLigo TCS Mirror Mount Horizontal Support, CO2 Laser Projection |
Austin Langley et al. |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
10 Mar 2011 |
| D0901492-v3 |
AOSEM Alignment Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
10 Mar 2011 |
| D0901549-v3 |
AOSEM Alignment Bracket, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
10 Mar 2011 |
| D1100444-x0 |
aLigo TCS Rear rubber shim, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
09 Mar 2011 |
| D1100293-v1 |
aLIGO TCS Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Fabrication
|
07 Mar 2011 |
| D1002327-v3 |
aLIGO TCS UHV Short Support, BSC7 & BSC8 |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Preliminary Design
|
07 Mar 2011 |
| D1002315-v3 |
aLIGO TCS UHV Bracket, Short Side, BSC7 |
Mindy Jacobson et al. |
Preliminary Design
Vacuum
Auxiliary Optics
|
07 Mar 2011 |
| D1002287-v3 |
aLIGO TCS UHV Bracket, Long Side, BSC7 |
Mindy Jacobson et al. |
Preliminary Design
Auxiliary Optics
System Engineering
Vacuum
|
07 Mar 2011 |
| D1002334-v2 |
aLIGO TCS UHV Coarse Adjust Pivot Rod, BSC7 & BSC8 |
Mindy Jacobson |
Preliminary Design
Vacuum
Auxiliary Optics
|
07 Mar 2011 |
| D1002333-v3 |
aLIGO TCS UHV Back Brace, BSC7 & BSC8 |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Preliminary Design
|
07 Mar 2011 |
| D1002317-v3 |
aLIGO TCS UHV Long Support, BSC7 & BSC8 |
Mindy Jacobson |
Preliminary Design
Vacuum
Auxiliary Optics
|
07 Mar 2011 |
| D1002311-v2 |
aLIGO TCS UHV EL Fine Adjust Pivot Plate, BSC7 & BSC8 |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Preliminary Design
|
07 Mar 2011 |
| D1002453-v2 |
aLIGO TCS UHV Bracket, Short Side, BSC8 |
Mindy Jacobson |
Final Design
Fabrication
Vacuum
Auxiliary Optics
|
07 Mar 2011 |
| D1002454-v2 |
aLIGO TCS UHV Bracket, Long Side, BSC8 |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Preliminary Design
|
07 Mar 2011 |
| D1002313-v2 |
aLIGO TCS UHV Fine Adjust Pivot Rod, BSC7 & BSC8 |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Preliminary Design
|
07 Mar 2011 |
| S0900326-v2 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
04 Mar 2011 |
| D1100416-x0 |
aLIGO TCS Spherical Bearing Ball, CO2 Laser Projection VP Enclosure |
Austin Langley |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
04 Mar 2011 |
| D080080-v4 |
ADVANCED LIGO, SUS, THIS, BS TOP STAGE, BEAM SPLITTER |
Joe ODell |
Suspensions
|
02 Mar 2011 |
| D1002475-v2 |
DC Power Pigtail Cord |
David Kinzel |
System Engineering
|
01 Mar 2011 |
| D1000729-v3 |
TCS Hartmann Sensor Camera Heat Spreader |
Mindy Jacobson et al. |
Auxiliary Optics
Preliminary Design
|
28 Feb 2011 |
| D1000736-v2 |
TCS Hartmann Sensor Camera Heat Sink |
Mindy Jacobson et al. |
Preliminary Design
Auxiliary Optics
|
28 Feb 2011 |
| D1003366-v2 |
Common Mode Test Rig Rear Panel |
Daniel Sigg |
Sensing and Control
|
28 Feb 2011 |
| E1100144-v1 |
Electropolished Aluminum -- outgassing test |
Dennis Coyne et al. |
System Engineering
Vacuum
|
27 Feb 2011 |
| D0902064-v2 |
Base Plate, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D0902066-v2 |
Optic Rest Block, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D020380-v2 |
Wire Start Clamp, Outside |
Derek Bridges |
Preliminary Design
Suspensions
|
23 Feb 2011 |
| D1100330-x0 |
aLIGO TCS Viewports Enclosure Mirror support plate, CO2 Laser Projection |
Austin Langley |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
|
22 Feb 2011 |
| D0900644-v8 |
Advanced LIGO ISC Component Locations |
Rich Abbott |
Conceptual Design
System Engineering
|
18 Feb 2011 |
| D1100265-v2 |
aLIGO TCS Fixture Base Plate, H2 UHV Steering Mirror Assembly |
Mindy Jacobson |
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
18 Feb 2011 |
| D1100295-v2 |
aLIGO TCS Fixture Template Brace, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Final Design
Fabrication
Auxiliary Optics
Vacuum
|
18 Feb 2011 |
| D1100300-v2 |
aLIGO TCS Interface Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Vacuum
Auxiliary Optics
Fabrication
Final Design
|
18 Feb 2011 |
| D1100297-v2 |
aLIGO TCS Long Base Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Fabrication
|
18 Feb 2011 |
| D1100296-v2 |
aLIGO TCS Short Base Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Fabrication
Final Design
|
18 Feb 2011 |
| M1000229-v1 |
LLO 35W PSL SOP |
David Kinzel et al. |
Safety
Laser Systems
|
18 Feb 2011 |
| M1000230-v1 |
LLO 35W TCS SOP |
David Kinzel et al. |
Laser Systems
Safety
|
18 Feb 2011 |
| D1001742-v3 |
aLIGO TCS CO2 Laser In-Vacuum Steering Optics Assembly, H2, BSC7 |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Fabrication
|
17 Feb 2011 |
| D1100294-v1 |
aLIGO TCS Fixture Template, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
16 Feb 2011 |
| G0900594-v1 |
Controlling radiation pressure instabilities in Enhanced LIGO |
Katherine Dooley et al. |
Sensing and Control
Meeting
|
02 Jul 2009 |
| D1100298-v1 |
aLIGO TCS Template Brace, H2 UHV CO2P Mirror Assembly |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Fabrication
Final Design
|
16 Feb 2011 |
| D1001721-v1 |
1U RACK CHASSIS with vents with interface |
Emery Brown |
Data Acquisition System
Fabrication
|
16 Feb 2011 |
| T0900486-v5 |
IO Stray Light Analysis and Baffle Design |
Guido Mueller et al. |
Final Design
Input Optics
|
15 Feb 2011 |
| D1100299-x0 |
aLIGO TCS Periscope Tube, CO2 Laser Projection VP Enclosure |
Austin Langley |
Vacuum
Auxiliary Optics
Final Design
Preliminary Design
|
15 Feb 2011 |
| T1100087-v1 |
SR785 Machine Settings File |
Rich Abbott |
Sensing and Control
Subsystem Test
|
10 Feb 2011 |
| T1100078-v2 |
ISC Whitening Chassis Misc. Parts BOM |
Rich Abbott |
Sensing and Control
Assembly
|
08 Feb 2011 |
| D0900603-v2 |
Wire Start Clamp, Inside, Upper Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
07 Feb 2011 |
| D0900634-v2 |
Wire Start Clamp, Inside, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
07 Feb 2011 |
| D0900632-v2 |
Wire Clamp Mount, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
07 Feb 2011 |
| D980184-v2 |
LOS Clamp, Long |
Derek Bridges |
System Engineering
Final Design
|
07 Feb 2011 |
| D1100228-x0 |
Voltage Translator Whitening |
Daniel Sigg |
Sensing and Control
|
07 Feb 2011 |
| D1002034-v1 |
CDS Internal Chassis Power Cable C |
Rich Abbott |
Assembly
Sensing and Control
|
04 Feb 2011 |
| T1000466-v3 |
4 Channel LSC Quad IQ Demodulator Module Misc. Parts |
Rich Abbott |
Assembly
Sensing and Control
|
04 Feb 2011 |
| G1100116-v1 |
40m LSC model design |
Koji Arai |
Sensing and Control
Basic R&D
|
04 Feb 2011 |
| D020406-v2 |
Double Start Counterwound Spring |
Andy Stein |
Final Design
Seismic Isolation
|
04 Feb 2011 |
| D1002395-v4 |
Framing Plans and Elevations - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Procurements
Laser Systems
Final Design
|
03 Feb 2011 |
| D1002394-v5 |
Room Layout / Framing Plan - L1 Laser Area Enclosure Acoustic Shell |
Richard Savage |
Final Design
Procurements
Laser Systems
|
03 Feb 2011 |
| D1002393-v4 |
Mechanical Sections and Details - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Laser Systems
Procurements
|
03 Feb 2011 |
| D1003328-v1 |
aLIGO TCS UHV H2 Assembly Interface Damper |
Mindy Jacobson |
Preliminary Design
Fabrication
Final Design
Auxiliary Optics
Vacuum
|
03 Feb 2011 |
| D1001850-v2 |
aLIGO TCS Ring Heater, Lower Copper Plate |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
03 Feb 2011 |
| D020407-v4 |
Double Start Counterwound Spring Connector |
Andy Stein |
Final Design
Seismic Isolation
|
03 Feb 2011 |
| D0901433-v2 |
Base Plate, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
01 Feb 2011 |
| D1100108-v1 |
Blank panel adapter |
Daniel Sigg |
Sensing and Control
|
31 Jan 2011 |
| D1100095-v2 |
Fiber coupler panel adapter |
Daniel Sigg |
Sensing and Control
|
31 Jan 2011 |
| D0900631-v2 |
Blade Clamp Mount, Intermediate Wire Jig, HLTS |
Michael Meyer |
Final Design
Suspensions
|
31 Jan 2011 |
| D0900595-v2 |
Base Plate, Upper Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
30 Jan 2011 |
| D0900597-v2 |
Wire Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
21 Jan 2011 |
| D0900596-v2 |
Blade Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
21 Jan 2011 |
| T080184-v2 |
A Color Coding System for Mechanical Models |
Derek Bridges |
Modelling
Preliminary Design
Final Design
Conceptual Design
System Engineering
|
18 Jan 2011 |
| D1002392-v3 |
Mechanical Plan and Schedules - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
18 Jan 2011 |
| D1001709-v1 |
I/O EXPANSION CHASSIS SPOTWELD PANEL B |
Emery Brown |
Data Acquisition System
Fabrication
|
18 Jan 2011 |
| D1001712-v2 |
I/O EXPANSION CHASSIS - FRONT PANEL |
Emery Brown |
Fabrication
Data Acquisition System
|
14 Jan 2011 |
| E080426-v1 |
Advanced LIGO ERGO Arm Hazard Analysis |
Gregg Harry et al. |
Core Optics
Installation
|
06 Mar 2009 |
| D071008-v2 |
Stage 0 Stiffener End Cap |
Andy Stein et al. |
Final Design
Seismic Isolation
|
14 Jan 2011 |
| T1100043-v1 |
YAG-444-4AH QPD RF Measurement Data |
Rich Abbott |
Sensing and Control
Basic R&D
|
14 Jan 2011 |
| E0900341-v3 |
Test Plan for the Input Mode Cleaner |
Guido Mueller et al. |
Final Design
Input Optics
|
14 Jan 2011 |
| D071180-v2 |
GS-13 Adapter Plate |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071071-v2 |
Rib, Tan, Flexure Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071070-v2 |
Rib, Tan, Flexure Cen |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071069-v2 |
Rib, Rad, Flexure Out 2 |
Andy Stein et al. |
Final Design
Seismic Isolation
|
14 Jan 2011 |
| D071068-v2 |
Rib, Rad, Flexure Out 1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071065-v2 |
Keel Base |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071056-v2 |
Rib, Rad, GS-13 Out 2 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071055-v2 |
Rib, Rad, GS-13 Out 1 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071054-v2 |
Rib, Rad, GS-13 Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071053-v2 |
Rib, Tan, GS-13 Cen |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071052-v2 |
Rib, Tan, GS-13 Mid |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D071006-v2 |
Stage 0 Stiffener Rib |
Andy Stein et al. |
Seismic Isolation
Final Design
|
14 Jan 2011 |
| D0902552-v3 |
EtherCAT Chassis Assembly |
Daniel Sigg |
Data Acquisition System
|
13 Jan 2011 |
| D0902575-v2 |
EtherCAT Adapter Double DB-15M |
Daniel Sigg |
Data Acquisition System
|
13 Jan 2011 |
| C1002165-v2 |
SOW for PS-129b Laser Area Enclosure Acoustic Shell (LLO) |
Derek Anderson et al. |
Laser Systems
Procurements
|
13 Jan 2011 |
| C1002124-v4 |
SOW for PS-132 Laser Area Enclosure Cleanrooms |
Derek Anderson et al. |
Laser Systems
Procurements
|
13 Jan 2011 |
| E1000760-v2 |
Cable Lengths, Corner Station, H1 & H2 |
Dennis Coyne |
Observatory Facilities
System Engineering
|
12 Jan 2011 |
| D080705-v3 |
RF Source Oscillator Board |
Daniel Sigg |
Sensing and Control
|
11 Jan 2011 |
| D080749-v2 |
Advanced LIGO, SUS, THIS, Screwed Rod Top Stage Tooling |
Joe ODell |
Suspensions
|
07 Jan 2011 |
| D080748-v2 |
Advanced LIGO, SUS, THIS, Bush Top Stage Tooling |
Joe ODell et al. |
Suspensions
|
07 Jan 2011 |
| D1003343-v1 |
H1, L1 PRC Septum Plate Port Location |
Dennis Coyne |
System Engineering
Vacuum
|
07 Jan 2011 |
| D1003344-v1 |
H2 PRC Septum Plate Port Location |
Dennis Coyne |
Vacuum
System Engineering
|
07 Jan 2011 |
| D1003364-v1 |
Common Mode Test Rig |
Daniel Sigg |
Sensing and Control
|
03 Jan 2011 |
| L1000320-v3 |
Linear motor specifications |
Sam Waldman |
Sensing and Control
|
29 Dec 2010 |
| D1003365-v1 |
Common Mode Test Rig Front Panel |
Daniel Sigg |
Sensing and Control
|
26 Dec 2010 |
| T1000023-v1 |
Viewports Subsystem Preliminary Design Document |
Michael Smith |
Auxiliary Optics
Preliminary Design
|
23 Dec 2010 |
| D0901784-v1 |
Common Mode Servo Interface Board |
Daniel Sigg |
Sensing and Control
|
19 Dec 2010 |
| D0901782-v2 |
Common Mode Servo Front Panel |
Daniel Sigg |
Sensing and Control
|
17 Dec 2010 |
| T080083-v4 |
Testing procedure for the Timing Master/FanOut board Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
15 Dec 2010 |
| G080405-v1 |
Introduction to DC Readout |
Tobin Fricke |
Sensing and Control
Commissioning
|
14 Dec 2010 |
| T1000175-v2 |
Thinner Compensation Plates for reduced Squeeze film damping |
Matthew Evans et al. |
Technical Review Board
Sensing and Control
Suspensions
Vacuum
System Engineering
Core Optics
Change Control
|
14 Dec 2010 |
| D071200-v4 |
Trim Adjustment Mass |
Andy Stein et al. |
Final Design
Seismic Isolation
|
13 Dec 2010 |
| D0902553-v2 |
EtherCAT Chassis Front Panel |
Daniel Sigg |
Data Acquisition System
|
08 Dec 2010 |
| D1002813-v1 |
Aluminum Viewport Cover |
Michael Meyer |
Vacuum
|
08 Dec 2010 |
| D1001449-v3 |
aLIGO AOS OpLev Large Telescope Mount |
Craig Conley |
Auxiliary Optics
|
07 Dec 2010 |
| E1000700-v4 |
DCN, aLIGO TCS Ring Heater Parent UHV Cable Assembly |
Mindy Jacobson et al. |
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
07 Dec 2010 |
| D1002962-v1 |
ISC CM Controls Chassis Name Plate |
Daniel Sigg |
Sensing and Control
|
07 Dec 2010 |
| D1002120-v5 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER FRONT PANEL |
Kurt Buckland |
System Engineering
Suspensions
|
07 Dec 2010 |
| D1002119-v5 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER WELDMENT |
Kurt Buckland |
System Engineering
Suspensions
|
07 Dec 2010 |
| D1002118-v4 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER |
Kurt Buckland |
Suspensions
System Engineering
|
07 Dec 2010 |
| D1003195-x0 |
aLIGO TCS External Clamping Flange Assembly, CO2 Laser Projection |
Cheryl Vorvick et al. |
Preliminary Design
Final Design
Auxiliary Optics
Vacuum
|
03 Dec 2010 |
| D1002975-x0 |
aLIGO_MC_Tube_Baffle_Plate_ Upper_MCB3 |
Tim Nguyen |
Basic R&D
Vacuum
|
03 Dec 2010 |
| D1001849-v2 |
aLIGO TCS Ring Heater, Upper Copper Plate |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
30 Nov 2010 |
| D1002345-v2 |
Electrical Connector Bushing |
Ayodele Cole |
Vacuum
Auxiliary Optics
Final Design
Fabrication
|
29 Nov 2010 |
| D060189-v3 |
ERM ESD PATTERN |
Kurt Buckland et al. |
System Engineering
|
14 Oct 2009 |
| D1002952-v2 |
aLIGO TCS RH Winding Guide |
Cheryl Vorvick et al. |
Final Design
Auxiliary Optics
Vacuum
|
15 Nov 2010 |
| D1002420-v1 |
aLIGO TCS RH Custom Bracket Adapter |
Mindy Jacobson et al. |
Vacuum
Auxiliary Optics
Final Design
Fabrication
|
15 Nov 2010 |
| D1001756-v2 |
aLIGO TCS RH, Upper Custom 25D Connector Bracket |
Mindy Jacobson |
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
15 Nov 2010 |
| D1002537-v2 |
Parts and Quantities for D1002424 Vibration Absorber Assembly |
Kurt Buckland |
System Engineering
Seismic Isolation
|
15 Nov 2010 |
| D1002594-v2 |
aLIGO, SUS, UPPER QUAD VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
System Engineering
Suspensions
|
15 Nov 2010 |
| D1001841-v3 |
aLIGO TMS FOCUS SLIDE LOCK |
Michael Miller |
Auxiliary Optics
Conceptual Design
|
12 Nov 2010 |
| D1002986-v1 |
aLIGO TCS RH Element Spacer |
Mindy Jacobson et al. |
Fabrication
Final Design
Vacuum
Auxiliary Optics
|
12 Nov 2010 |
| C1002079-v1 |
Specification for De-Installation LA LIGO Site |
LSC |
Requirements
Observatory Facilities
|
11 Nov 2010 |
| C1001836-v1 |
Specification for De-Installation - Washington site. |
John Worden et al. |
Procurements
Installation
Observatory Facilities
|
11 Nov 2010 |
| D1002687-v1 |
Aluminum Cover for 60" Vacuum Flanges |
Michael Meyer |
Vacuum
Final Design
|
10 Nov 2010 |
| C1002164-v2 |
SOW for PS-129a Laser Area Enclosure Acoustic Shell (LHO) |
Derek Anderson et al. |
Laser Systems
Procurements
|
09 Nov 2010 |
| D0901550-v2 |
Upper AOSEM Mounting Bracket, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Nov 2010 |
| D1002388-v3 |
Mechanical Sections and Details - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D1002781-v2 |
Ante-room Plan, H2 Laser Area Enclosure |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D1002789-v2 |
Ante-room Elevations, L1 Laser Area Enclosure |
Derek Anderson et al. |
Final Design
Laser Systems
Procurements
|
05 Nov 2010 |
| D1002787-v2 |
Ante-room Plan, L1 Laser Area Enclosure |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D1002786-v2 |
Ante-room Elevations, H2 Laser Area Enclosure |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D1002391-v3 |
Mechanical Plan - L1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
05 Nov 2010 |
| D1002390-v2 |
Framing Plans and Elevations - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
05 Nov 2010 |
| D1002389-v2 |
Room Layout / Framing Plan - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
05 Nov 2010 |
| D1002387-v2 |
Mechanical Plan and Schedules - H1 Laser Area Enclosure Acoustic Shell |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D1002633-v2 |
Ante-room Plan, H1 Laser Area Enclosure |
Derek Anderson et al. |
Laser Systems
Procurements
Final Design
|
05 Nov 2010 |
| D1002634-v1 |
Ante-room Elevations, H1 Laser Area Enclosure |
Derek Anderson et al. |
Final Design
Procurements
Laser Systems
|
05 Nov 2010 |
| D0900340-v2 |
Lower AOSEM Mounting Bracket, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Nov 2010 |
| D0901006-v1 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
04 Nov 2010 |
| T0900653-v2 |
MCA TUBE AND MCB TUBE VIEWPORTS |
Michael Smith |
Auxiliary Optics
Vacuum
System Engineering
Final Design
|
03 Nov 2010 |
| C1002229-v1 |
PSL Laser Area Enclosure Cleanrooms - Specifications, Requirements, and Design Considerations |
Derek Anderson et al. |
Final Design
Laser Systems
Procurements
|
03 Nov 2010 |
| T1000657-v1 |
DC Power Strip Test Results |
Rich Abbott |
Subsystem Test
System Engineering
|
02 Nov 2010 |
| E1000655-v1 |
Frequency Doubler/Divider Count |
Daniel Sigg |
Sensing and Control
|
01 Nov 2010 |
| D1001813-v2 |
aLIGO TMS THREAD MT. SEC. FOCUS |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| D1001832-v2 |
aLIGO TMS VERT. SLIDE SEC. BRK. |
Michael Miller |
Conceptual Design
Auxiliary Optics
|
01 Nov 2010 |
| T0900612-v2 |
AdvLigo CDS Design Overview |
Rolf Bork |
Data Acquisition System
|
27 Oct 2010 |
| D0900302-v3 |
Timing IRIG-B Front Panel |
Daniel Sigg |
Data Acquisition System
|
27 Oct 2010 |
| D1002247-v1 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER LSAT CLAMP |
Kurt Buckland |
Suspensions
System Engineering
|
26 Oct 2010 |
| D080709-v1 |
RF Source: Push Wheel Panel |
Daniel Sigg |
Detector
|
25 Oct 2010 |
| D1002248-v2 |
aLIGO, SUS, LOWER STRUCTURE STORAGE CONTAINER SUPPORT RAILS |
Kurt Buckland |
System Engineering
Suspensions
|
22 Oct 2010 |
| T1000275-v2 |
Transmon SUS Telescope Alignment Procedure |
Michael Smith |
Auxiliary Optics
Preliminary Design
|
22 Oct 2010 |
| S080003-x0 |
OMC Tip/Tilt Hardware Shutter Chassis |
Rich Abbott |
Sensing and Control
|
26 Nov 2008 |
| D1002738-v1 |
Harmonics Generator Power Supply Interface Board |
Daniel Sigg |
Sensing and Control
|
18 Oct 2010 |
| D1002735-v1 |
Harmonics Generator Power Supply |
Daniel Sigg |
Sensing and Control
|
18 Oct 2010 |
| D1002742-v1 |
Capacitor Piggyback Board |
Daniel Sigg |
Sensing and Control
|
16 Oct 2010 |
| M1000328-x0 |
LLO TCS LVEA Alignment SOP |
David Kinzel et al. |
Safety
Laser Systems
Operations
|
14 Oct 2010 |
| M1000331-x0 |
LLO 100W HPLF Laser Destructive Testing SOP |
Rupal Amin et al. |
Safety
Laser Systems
Operations
|
14 Oct 2010 |
| M1000330-x0 |
LLO 100W HPLF High Power Alignment SOP |
David Kinzel et al. |
Safety
Laser Systems
Operations
|
14 Oct 2010 |
| D1001858-v3 |
aLIGO TCS Ring Heater Element Retainer, Right |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Preliminary Design
Final Design
|
14 Oct 2010 |
| D1001819-v3 |
aLIGO TCS Ring Heater Element Retainer, Left |
Mindy Jacobson |
Final Design
Preliminary Design
Auxiliary Optics
Vacuum
|
14 Oct 2010 |
| D1002597-v1 |
aLIGO, SUS, UPPER QUAD VIBRATION ABSORBER CLAMP |
Kurt Buckland |
Suspensions
System Engineering
|
14 Oct 2010 |
| D1002174-v1 |
aLIGO FM/BS VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
System Engineering
Suspensions
|
14 Oct 2010 |
| D1002081-v1 |
aLIGO OMC VIBRATION ABSORBER MOUNTING PLATE |
Kurt Buckland |
Suspensions
System Engineering
|
14 Oct 2010 |
| T1000488-v1 |
2010 LSC Instrument Science Priority Matrix |
David Shoemaker |
Detector
Basic R&D
Collaboration
|
14 Oct 2010 |
| E1000569-x0 |
Document Change Notice (DCN) - VE Flange Protectors and Covers |
Michael Meyer |
Vacuum
Final Design
|
12 Oct 2010 |
| D1002365-v2 |
Clear Cover for 60" Chamber Doors |
Michael Meyer |
Vacuum
Final Design
|
12 Oct 2010 |
| D1002615-v1 |
Flange Protector for 84" Door (HAM) |
Michael Meyer |
Vacuum
|
12 Oct 2010 |
| D1002614-v1 |
Flange Protector for 60" Door (BSC) |
Michael Meyer |
Vacuum
|
12 Oct 2010 |
| D0900537-v2 |
LHO As Built HAM6 optical layout |
Sam Waldman |
Installation
Sensing and Control
|
07 Oct 2010 |
| D1001722-v1 |
1U RACK CHASSIS WITH VENT HOLES |
Jay Heefner et al. |
Fabrication
Data Acquisition System
|
06 Oct 2010 |
| T1000581-v1 |
Optical Layout and Parameters for the POP/ALS Beams |
David Tanner et al. |
Core Optics
Auxiliary Optics
Sensing and Control
Input Optics
|
05 Oct 2010 |
| D070552-v2 |
Advanced LIGO, SUS, ITM/ETM Structure, ITM/ETM Sleeve |
Joe ODell et al. |
Final Design
Suspensions
|
05 Oct 2010 |
| L1000368-v1 |
LHO Installation Leader responsibilities and authorities |
David Shoemaker |
Installation
Detector
Management
|
04 Oct 2010 |
| D060334-v2 |
Advanced LIGO, SUS, Quad N-Ptype, WIRE CLAMP JAW, ALL MASSES |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060333-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP BODY, TOP STAGE |
Joe ODell |
Suspensions
|
30 Sep 2010 |
| D060331-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, JACKING SCREW/Earthquake Stop |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060330-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, ROTATIONAL ADJUSTER BASE PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D0900303-v1 |
Timing IRIG-B Rear Panel |
Daniel Sigg |
Data Acquisition System
|
30 Sep 2010 |
| D090434-v2 |
ADV LIGO, SUS, THIS, FRONT TRANSPORT PAD, QUAD SUS |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D080245-v3 |
ADV LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE STOP, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D080244-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TEST REACTION MASS, EARTHQUAKE STOP MOUNT PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060448-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PIN (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Final Design
Suspensions
|
30 Sep 2010 |
| T080136-v2 |
AdvLigo CDS Realtime Software SysAdmin Guide |
Rolf Bork |
Data Acquisition System
|
29 Sep 2010 |
| D060325-v2 |
Advanced LIGO, SUS, TOP STAGE N-P TYPE, ROTATIONAL ADJUSTER, STATIC HALF |
Joe ODell |
Final Design
Suspensions
|
29 Sep 2010 |
| T1000564-v1 |
Allowable Bake Temperature for UHV Processing of Aluminum Alloys |
Dennis Coyne |
System Engineering
Vacuum
|
28 Sep 2010 |
| D080725-v2 |
Earthquake Stop for Metal or Glass, 2.5 Inch |
Derek Bridges |
Suspensions
Final Design
|
26 Sep 2010 |
| E1000479-v1 |
Optical Contamination Test Results MasterBond EP30-2 samples on glass slides |
Liyuan Zhang et al. |
Suspensions
System Engineering
Vacuum
|
26 Sep 2010 |
| D080724-v3 |
Mounting Cap, Earthquake Stop |
Derek Bridges |
Final Design
Suspensions
|
26 Sep 2010 |
| D1001452-v1 |
aLIGO AOS OpLev TX Enclosure Base |
Craig Conley |
Auxiliary Optics
|
24 Sep 2010 |
| D1001670-v1 |
aLIGO AOS OpLev Auxiliary View Finder Telescope Mount |
Norris Kilpatrick |
Auxiliary Optics
|
24 Sep 2010 |
| G1000931-v1 |
Thermal noise in dielectric mirror coatings: calculation and optimization |
Nikita Kondratiev et al. |
Core Optics
|
23 Sep 2010 |
| G1000925-v1 |
The Glasgow 10m Prototype |
John Nelson et al. |
Sensing and Control
Basic R&D
|
23 Sep 2010 |
| G1000912-v1 |
Advanced Virgo INJ: Faraday isolator, Electro-optical modulator, high power beam dump and Input mode-cleaner |
Eric Genin |
Meeting
Input Optics
|
23 Sep 2010 |
| D1002485-v2 |
Schematic for PMC servo card |
Tara Chalermsongsak |
Laser Systems
|
20 Sep 2010 |
| D1002477-v1 |
Phase Frequency Discriminator Front Panel |
Daniel Sigg |
Sensing and Control
|
20 Sep 2010 |
| E1000441-x0 |
DCN for Advanced LIGO 312 Figure trial - Sample Prepearation E1000440-v1 |
GariLynn Billingsley |
Core Optics
|
17 Sep 2010 |
| E1000440-v1 |
Advanced LIGO 312 Figure trial – Sample Preparation |
GariLynn Billingsley |
Core Optics
|
17 Sep 2010 |
| E080516-v3 |
E080516_Advanced LIGO PR3 Polishing Specification |
Margot Hennig |
Final Design
Core Optics
|
14 Sep 2010 |
| T990081-v2 |
Time Domain Modal Model in End-to-End simulation package |
Hiro Yamamoto |
Modelling
Core Optics
|
13 Sep 2010 |
| T990091-x0 |
Time Domain Modal Model in End-to-End simulation package |
Hiro Yamamoto |
Core Optics
Modelling
|
13 Sep 2010 |
| E1000405-v1 |
Test Plan Table Top Frequency Stabilization Servo (TTFSS) |
Raphael Cervantes et al. |
Laser Systems
|
11 Sep 2010 |
| D1002037-v2 |
HAM Structure Lift Parts and Quantities |
Kurt Buckland |
System Engineering
|
09 Sep 2010 |
| D070579-v2 |
Upper Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Sep 2010 |
| T1000530-v1 |
Procedure for Nikon LV-100 Microscope Defect Analysis |
Rand Dannenberg |
Core Optics
Basic R&D
|
08 Sep 2010 |
| T080321-v1 |
BSC Suspension Test Stand Electronics and Controls Quick Start Guide |
Jay Heefner |
Data Acquisition System
Suspensions
|
07 Sep 2010 |
| T1000525-x0 |
Loss budget by optics analysis using SIS |
Hiro Yamamoto |
Core Optics
Modelling
|
06 Sep 2010 |
| G1000788-v1 |
RFPD Noise Mitigation |
Rich Abbott |
Sensing and Control
Basic R&D
|
03 Sep 2010 |
| T0900289-v4 |
LIGO Instrument Science Priority Matrix |
David Shoemaker |
Detector
Basic R&D
Collaboration
Upgrades
|
02 Sep 2010 |
| E1000376-v1 |
RGA Test Results: A-OSEM Circuit Board Sub-Assembly (223 units) |
Dennis Coyne et al. |
Incoming Inspection
Suspensions
System Engineering
Vacuum
|
01 Sep 2010 |
| C1001188-v1 |
Statement of Work Fabrication and Assembly of IO Expansion Chassis for Advanced LIGO Controls |
Jay Heefner |
Data Acquisition System
Fabrication
|
20 Jul 2010 |
| E1000375-v1 |
RGA Test Results: A-OSEM Assemblies (quantity = first 7 production units; ICS bake 324) |
Dennis Coyne et al. |
Vacuum
System Engineering
Suspensions
|
31 Aug 2010 |
| D070576-v2 |
Lower Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| D070577-v2 |
Side Gusset, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| D070578-v2 |
Side Strut, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| D070580-v2 |
Top Gusset, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| E1000370-v1 |
GPIB Control Software |
Rich Abbott |
Subsystem Test
System Engineering
|
27 Aug 2010 |
| T1000508-v1 |
Comparison of the Scientific Cases for Two Networks: HHJLV and AHJLV |
Rainer Weiss et al. |
Data and Computing
Modelling
Astrophysics / Multi-messenger
|
26 Aug 2010 |
| D030021-v2 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 2.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
Fabrication
System Engineering
|
26 Aug 2010 |
| E1000196-v1 |
Optical Contamination Cavity Test Results: New Focus Picomotor 830X-UHV |
Liyuan Zhang et al. |
Sensing and Control
Vacuum
System Engineering
|
25 Aug 2010 |
| T960127-v1 |
Physics Environment Monitoring Design Requirements Document |
David Shoemaker et al. |
Requirements
Detector
|
24 Aug 2010 |
| D0900946-v4 |
D0900946 Adapter A-16, 44 1/4" I.D. x 60 1/2" I.D., LIGO Vacuum Equipment |
Dennis Coyne et al. |
Final Design
System Engineering
Vacuum
|
23 Aug 2010 |
| P0900304-v8 |
Gravitational wave detector derived error signals for the LIGO thermal compensation system |
Joe Giaime et al. |
Core Optics
Basic R&D
Modelling
Sensing and Control
|
23 Aug 2010 |
| D0902113-v1 |
AdLIGO AOS OpLev Large Telescope Mount |
Craig Conley |
Auxiliary Optics
|
20 Aug 2010 |
| D1000450-x0 |
Number Not Used |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1000522-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (LHO) |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1000311-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly LH (TM-LHO) |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1000597-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment RH (LHO) |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| C1001360-v2 |
SOW for Manufacture of aLIGO TCS Ring Heater Upper & Lower Assembly Components |
Mindy Jacobson |
Final Design
Fabrication
Auxiliary Optics
Vacuum
|
19 Aug 2010 |
| D1000308-v1 |
aLIGO AOS OpLev TX Pier Assembly [(ETM-H1) (ITM- H1, H2)] |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1000377-x0 |
aLIGO AOS BSC6-H2, XYZ Global CS for ETMY Oplev TX Installation |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1000453-x0 |
Number Not Used |
Craig Conley |
Auxiliary Optics
|
19 Aug 2010 |
| D1002236-x0 |
aLIGO TMS TELE SEC. MIRROR CLAMP ASSEM. |
Michael Miller |
Auxiliary Optics
|
19 Aug 2010 |
| D080006-v3 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS LOWER BOTTOM HALF |
Joe ODell et al. |
Suspensions
|
19 Aug 2010 |
| D1002232-x0 |
aLIGO Mode Cleaner Tube Baffle Plate Assy, MCA |
Heidy Kelman |
Auxiliary Optics
Basic R&D
|
19 Aug 2010 |
| D1002231-x0 |
aLIGO Mode Cleaner Tube Baffle Plate Assy, WAMCB4 |
Heidy Kelman |
Auxiliary Optics
Basic R&D
|
19 Aug 2010 |
| T1000269-v4 |
aLIGO AOS OpLev RX Pier Assemblies (TM- LHO, LLO) WORK LIST |
Craig Conley |
Auxiliary Optics
|
18 Aug 2010 |
| E1000322-x0 |
DCN 6in Vacuum Viewport |
Michael Smith |
Auxiliary Optics
Final Design
|
16 Aug 2010 |
| D030023-v3 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 1 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
16 Aug 2010 |
| D1001800-v2 |
Cavity Contamination Test Facility Block Diagram |
Rich Abbott |
Vacuum
Basic R&D
|
16 Aug 2010 |
| D1001515-v1 |
aLIGO AOS OpLev TRX Pier Assembly (HAM-LHO) |
Craig Conley |
Auxiliary Optics
|
14 Aug 2010 |
| D1001212-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly RH (TM-LHO) |
Craig Conley |
Auxiliary Optics
|
14 Aug 2010 |
| D1002175-v1 |
Timing Frequency Counter Front Panel |
Daniel Sigg |
Data Acquisition System
|
13 Aug 2010 |
| D1002176-v1 |
Timing Frequency Counter Rear Panel |
Daniel Sigg |
Data Acquisition System
|
13 Aug 2010 |
| T1000477-v1 |
Advanced LIGO Timing IRIG-B Interface Module |
Daniel Sigg et al. |
Data Acquisition System
|
11 Aug 2010 |
| E060231-v1 |
Printed Circuit Checklist Prior To Manufacture |
Rich Abbott |
System Engineering
Fabrication
|
11 Aug 2010 |
| D1002111-x0 |
aLIGO_Manifold Cryo Baffle_Magnet Assy |
Tim Nguyen |
Auxiliary Optics
Basic R&D
|
11 Aug 2010 |
| D1000682-v2 |
TCS Glass Rod Insulator for Ring Heater |
Mindy Jacobson et al. |
Final Design
Preliminary Design
Conceptual Design
Auxiliary Optics
|
10 Aug 2010 |
| T1000227-v1 |
Summary of S5 Calibration Models and Uncertainties |
Keita Kawabe et al. |
Calibration
Detector
|
09 Aug 2010 |
| D1001840-x0 |
aLIGO AOS OpLev Auxiliary View Finder Telescope |
Craig Conley |
Auxiliary Optics
|
08 Aug 2010 |
| D1001350-x0 |
aLIGO_MC_Tube_Baffle_Plate_Brace_WAMCB3 |
Heidy Kelman |
Auxiliary Optics
Basic R&D
|
06 Aug 2010 |
| D080042-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP ASSY #1, BS TOP MASS |
Joe ODell |
Suspensions
|
05 Aug 2010 |
| T1000467-v1 |
4 Channel WFS Quad IQ Demodulator Module Misc. Parts |
Rich Abbott |
Sensing and Control
Assembly
|
04 Aug 2010 |
| D1000969-v2 |
aLIGO TCS Monolithic Ring Heater Shield |
Guido Mueller et al. |
Auxiliary Optics
Preliminary Design
Final Design
Fabrication
|
04 Aug 2010 |
| T1000291-v2 |
aLIGO AOS OpLev TX Pier Assemblies [(PR3, SR3) - (LHO, LLO)] WORK LIST |
Craig Conley |
Auxiliary Optics
|
03 Aug 2010 |
| T1000270-v4 |
aLIGO AOS OpLev TX Pier Assemblies (TM- LHO, LLO) WORK LIST |
Craig Conley |
Auxiliary Optics
|
03 Aug 2010 |
| T1000290-v2 |
aLIGO AOS OpLev TRX Pier Assemblies (HAM- LHO, LLO) WORK LIST |
Craig Conley |
Auxiliary Optics
|
03 Aug 2010 |
| D020653-v2 |
Screwdrive System, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020607-v3 |
T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020605-v3 |
Main Section, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D1001984-x0 |
aLIGO TMS HORIZONTAL SCREW |
Michael Miller |
Auxiliary Optics
|
03 Aug 2010 |
| D080504-v2 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, BOTTOM RING |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080502-v2 |
ADVANCED LIGO, SUS - BEAM SPLITTER UPPER STRUCTURE, FACE PLATE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080112-v2 |
ADVANCED LIGO, SUS, BS TRIPPLE, BS BOTTOM TABLECLOTH PLATE, BS BOTTOM TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080111-v2 |
ADVANCED LIGO, SUS, THIS, BS BOTTOM TABLECLOTH, BEAMSPLITTER SUSPENSION |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080109-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH TOP PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080108-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH SIDE PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080106-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH FRONT PANEL, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080088-v2 |
ADVANCED LIGO, SUS, BLADE WIRE CLAMP, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080081-v2 |
ADVANCED LIGO, SUS, TOP STAGE STIFF BACK, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D070433-v2 |
ADVANCED LIGO, SUS, WIRE CLAMP JAW, BS MASSES |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070432-v2 |
ADVANCED LIGO, SUS, BASE PLATE WIRE CLAMP BODY, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070428-v2 |
ADVANCED LIGO, SUS, TOP MASS N-P TYPE, STOP BRIDGE, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070424-v2 |
ADVANCED LIGO, SUS, PITCH ADJUSTER & MASS, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070419-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP BOTTOM JAW, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D1001964-x0 |
aLIGO_AOS_D0900623_TFP Polarizer_IXM200 C2 Mirror Mount Assy |
Manuel Ruiz |
Basic R&D
Auxiliary Optics
|
02 Aug 2010 |
| E0900028-v1 |
BSC ISI-Quad Modal analysis |
Fabrice Matichard |
System Test
Seismic Isolation
|
02 Aug 2010 |
| G1000729-v1 |
LSC RFPD Analysis |
Rich Abbott |
Sensing and Control
Basic R&D
|
30 Jul 2010 |
| D047935-v4 |
Locker Spherical Pin |
Andy Stein et al. |
Final Design
Seismic Isolation
|
30 Jul 2010 |
| D1001940-x0 |
aLIGO TIE IN TO EARTHQUAKE STOP SIDE BAR LT |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
29 Jul 2010 |
| D1001936-x0 |
aLIGO TMS DET-TRON-RS1-2- FOCUS SLIDE ASSY |
Michael Miller |
Auxiliary Optics
|
29 Jul 2010 |
| C1001262-v1 |
Statement of Work For Acquisition of 20 slot PCIe Expansion Backplanes for aLIGO |
Jay Heefner |
Data Acquisition System
Procurements
|
29 Jul 2010 |
| D1001932-x0 |
aLIGO TMS F2 MIRROR CLAMP ASSY. |
Michael Miller |
Auxiliary Optics
|
29 Jul 2010 |
| D1001931-x0 |
aLIGO TMS FLEXURE SECY MIRROR MT. |
Michael Miller |
Auxiliary Optics
|
29 Jul 2010 |
| D1001930-x0 |
aLIGO TMS FLEXURE SECY MIRROR MT. ASSY. |
Michael Miller |
Auxiliary Optics
|
29 Jul 2010 |
| T1000434-v1 |
Advantages of cleaning optics with Red First Contact |
Margot Hennig |
Core Optics
|
27 Jul 2010 |
| D080243-v2 |
ADV LIGO, SUS, QUAD N-PTYPE PEN-RE MASS, EARTHQUAKE STOP MOUNT PLATE, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080242-v2 |
ADV LIGO, SUS, THIS, MODIFIED 1/4-20 UNC X 1" HEX HEAD, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080167-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, CAN FRONT PLATE ITM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D1000944-v2 |
ALIGO TEST MASS RING HEATER OUTER RING |
Mindy Jacobson et al. |
Preliminary Design
Fabrication
Final Design
Auxiliary Optics
|
26 Jul 2010 |
| D1000943-v2 |
ALIGO TEST MASS RING HEATER INNER RING |
Mindy Jacobson et al. |
Auxiliary Optics
Vacuum
Fabrication
Preliminary Design
|
26 Jul 2010 |
| D070549-v2 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM EARTHQUAKE STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070547-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070546-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070545-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070544-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070543-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM TC E'QUAKE STOP ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070542-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM RC E'QUAKE STOPS ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070541-v2 |
ADVANCED LIGO, SUS, AS DRW, UIM RC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070540-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, UIM TC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070238-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Steel Disk (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070236-v2 |
Advanced LIGO, SUS, Penultimate Mass Flag Assembly, Penultimate Mass Flag Mount (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070235-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Holder (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070226-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Cable Clamp Jaw |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070224-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Side Wireclamp Body |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070223-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Wire Clamp |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060481-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ROUND MASS FRONT STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060479-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PEN RE MASS ASSY PAD |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060478-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060477-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060476-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE-STOP MOUNTS-SHORT, LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060462-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, INNER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060450-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, SPACER # 4 (TEST MASS ADJUSTER) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060449-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060447-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060430-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| C961213-v1 |
Technical Direction Memorandum 15 to CBI: DI Water Specification |
Dennis Coyne |
Fabrication
Vacuum
|
23 Jul 2010 |
| D1001818-x0 |
aLIGO TCS Ring Heater Element Retainer, Left |
Mindy Jacobson |
Auxiliary Optics
Vacuum
Final Design
Preliminary Design
|
23 Jul 2010 |
| T1000340-v1 |
Tiltmeter Characterization - Electro-Magnetic Anti-Spring, Hysteresis, Noise Testing and Analysis |
Riccardo DeSalvo et al. |
Seismic Isolation
Sensing and Control
|
23 Jul 2010 |
| D1001710-v1 |
I/O EXPANSION CHASSIS - SPOTWELD PANEL C |
Emery Brown |
Data Acquisition System
Fabrication
|
23 Jul 2010 |
| D060421-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, MASS AND SUPPORT MEMBER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060420-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, WIRE CLAMP ADJUSTMENT BLOCK |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060419-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060417-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, OSEM MAGNET AND FLAG CONCEPT PART BUILT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060415-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060414-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TiP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060413-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, 1/4" 20 UNC X 1" CAP HEAD, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060412-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM BRACKET (TOP OSEM) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060411-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060408-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, ECD MAGNET MOUNT PLATE, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060407-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM & ECD UNIT BACKBONE, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060406-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE STIFFENER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060405-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, PITCH ADJUSTER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060404-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE CLAMP (TOP Half) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060399-v2 |
ADVANCED LIGO, SUS, QUAD TOP MASS N-PTYPE, STOP BRIDGE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060398-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, PITCH ADJUSTER & MASS ADJUSTER TURRET |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060397-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS SPACER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060395-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, WIRE CLAMP BODY (TOP MASS WIRE CLAMP) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060391-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP WIRE CLAMP (Top Mass) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060385-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060382-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060381-v2 |
ADVANCED LIGO, SUS, UI MASS QUAD N-PTYPE, UI MASS BLADE ECD |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D1000447-x0 |
aLIGO AOS OpLev TX Pier Weldment (PR3, SR3 - LHO) |
Craig Conley |
Auxiliary Optics
|
22 Jul 2010 |
| D1001856-x0 |
aLIGO AOS OpLev TX Pier Side Panel (PR3, SR3 - LHO) |
Craig Conley |
Auxiliary Optics
|
22 Jul 2010 |
| D1000448-x0 |
aLIGO AOS OpLev TRX Pier Weldment (HAM-LHO) |
Craig Conley |
Auxiliary Optics
|
22 Jul 2010 |
| D1001852-x0 |
aLIGO AOS OpLev TRX Pier Side Panel (HAM-LHO) |
Craig Conley |
Auxiliary Optics
|
22 Jul 2010 |
| D060380-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060379-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, OSEM AND FLAG COUNTERWEIGHT UI MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060378-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060377-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060376-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, MASS BASE PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060358-v2 |
Advanced LIGO, SUS, Quad N-Ptype DUMMY MASSES, DUMMY TEST MASS SIDE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060354-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CLAMPING COLLAR (PITCH MASS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060350-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CONTROL RING, LIGO 1 OSEM MOUNT |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060344-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, BACK PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060343-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, FRONT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060342-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, CENTRAL MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060340-v2 |
ADVANCED LIGO, SUS, ROUND MASS WIRE CLAMP, ROUND MASS CLAMP JAW, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060338-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, ROUND MASS WIRE CLAMP PLATE, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060327-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060326-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060321-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, POSITION ADJUSTER FOR FRONT PITCH OSEM |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060318-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD MOUNTING BRACKET (LOCAL CONTROLS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060317-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, ECD STATIC BLOCK |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060315-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TABLECLOTH PINCH PLATE, UPPER STRUCTURE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060313-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TOP PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060237-v2 |
ADV LIGO, SUS, QUAD N-PTYPE UI MASS, BOTTOM BLADE SPRINGS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060236-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TOP MASS, MIDDLE BLADE SPRING |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| L1000318-v2 |
Initial and Enhanced LIGO: a brief chronology |
Stan Whitcomb |
Detector
|
21 Jul 2010 |
| T1000421-v2 |
Certification of SuperLum Pilot4-PCB Driver for use in aLIGO |
Michael Enciso |
Auxiliary Optics
Basic R&D
|
20 Jul 2010 |
| D1001817-x0 |
SLC FIXTURE CLAMP FOR BLADE D1001006 HEAT TREAT |
Niem Nguyen |
Auxiliary Optics
Modelling
|
20 Jul 2010 |
| D1001815-x0 |
aLIGO TCS Ring Heater Winding Tool, Upper |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Vacuum
Auxiliary Optics
|
20 Jul 2010 |
| D0900990-v2 |
Screw, Socket Head Cap, #8-32 UNC-3A X 1.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
20 Jul 2010 |
| D060445-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BUSH (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060444-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR - LONG (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060357-v2 |
Advanced LIGO, SUS, ASSEMBLY MASSES Quad N-Ptype, HALF MASS (DUMMY HALF REACTION MASS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070216-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070215-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Wire Clamp Body (Top Ring Wire Clamp) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| G1000710-v2 |
Tiltmeter Characterization - EMAS, Hysteresis Noise Studies 2009 presentation |
Riccardo DeSalvo et al. |
Basic R&D
Seismic Isolation
Sensing and Control
|
19 Jul 2010 |
| D1001809-v1 |
aLIGO PSL/IO optical table leg |
Richard Savage |
Laser Systems
Fabrication
|
16 Jul 2010 |
| T050089-v1 |
Snapshot of LIGO Mechanical Resonances HTML Pages, Circa S1-S4 |
Michael Landry |
Basic R&D
Core Optics
|
16 Jul 2010 |
| T970191-v1 |
Test Mass Transmissibility |
Dennis Coyne |
Core Optics
Modelling
|
16 Jul 2010 |
| C1000290-v4 |
SOW for the BSC installation tooling 5-axis tables |
Kurt Buckland et al. |
System Engineering
|
15 Jul 2010 |
| G1000699-v1 |
40m TAC Meeting Jul 2010 Presentation |
Rana Adhikari et al. |
Detector
Basic R&D
Subsystem Test
|
15 Jul 2010 |
| G1000323-v1 |
40m upgrade status |
Koji Arai |
Meeting
Upgrades
Sensing and Control
|
15 Jul 2010 |
| G1000546-v1 |
Simulated Plant Approach |
Peter Michael Kalmus et al. |
Commissioning
Basic R&D
Modelling
Sensing and Control
|
15 Jul 2010 |
| D1001446-v1 |
40m Vertex Green Locking Periscope A Base |
Daisuke Tatsumi et al. |
Auxiliary Optics
Basic R&D
|
15 Jul 2010 |
| D1001447-v1 |
40m Vertex Green Locking Periscope A Sidebar |
Daisuke Tatsumi et al. |
Basic R&D
Auxiliary Optics
|
15 Jul 2010 |
| D1001448-v1 |
40m Vertex Green Locking Periscope A Mirror Holder |
Daisuke Tatsumi et al. |
Basic R&D
Auxiliary Optics
|
15 Jul 2010 |
| G1000642-v1 |
Technologies of Gravitational Wave Detection |
Koji Arai |
Detector
Education, Outreach
|
15 Jul 2010 |
| D1001613-v1 |
40m Vertex Green Locking Periscope A PTFE Post |
Koji Arai |
Auxiliary Optics
Basic R&D
|
15 Jul 2010 |
| D1001714-v1 |
I/O EXPANSION CHASSIS - TOP COVER |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001711-v1 |
I/O EXPANSION CHASSIS - SPOTWELD PANEL D |
Emery Brown |
Fabrication
Data Acquisition System
|
13 Jul 2010 |
| D1001707-v1 |
I/O EXPANSION CHASSIS - REAR BOTTOM PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001706-v1 |
I/O EXPANSION CHASSIS - INTERNAL PANEL |
Emery Brown |
Fabrication
Data Acquisition System
|
13 Jul 2010 |
| D1001705-v1 |
I/O EXPANSION CHASSIS - INTERNAL BRACKET |
Emery Brown |
Fabrication
Data Acquisition System
|
13 Jul 2010 |
| D1001704-v1 |
I/O EXPANSION CHASSIS - I/O BRACKET |
Emery Brown |
Fabrication
Data Acquisition System
|
13 Jul 2010 |
| D1001703-v1 |
I/O EXPANSION CHASSIS - BACK PANEL |
Emery Brown |
Data Acquisition System
Fabrication
|
13 Jul 2010 |
| D1001702-v1 |
I/O EXPANSION CHASSIS - HANDLE BRACKET |
Emery Brown |
Fabrication
Data Acquisition System
|
13 Jul 2010 |
| D0901845-x0 |
COC_CONTAINER_SIMPLIFIED-obsolete |
Ken Mailand |
Preliminary Design
Core Optics
|
13 Jul 2010 |
| D0901548-v2 |
AOSEM Adjustment Collar |
Bobby Moore |
Suspensions
Final Design
|
13 Jul 2010 |
| T050071-v1 |
Advanced LIGO Quad Suspension Installation Fixtures Design Review |
Dennis Coyne |
System Engineering
|
12 Jul 2010 |
| D1001750-x0 |
SLC ARM CAVITY BAFFLE SUPPORT-LASTI |
Niem Nguyen |
Auxiliary Optics
Modelling
|
12 Jul 2010 |
| T1000381-v1 |
Advanced LIGO Core Optics Coating Design summary |
GariLynn Billingsley |
Final Design
Core Optics
|
09 Jul 2010 |
| T1000383-v1 |
Advanced LIGO Core Optics Polishing Design summary |
GariLynn Billingsley |
Final Design
Core Optics
|
09 Jul 2010 |
| T1000380-v1 |
Caltech WYKO pixel calibration |
GariLynn Billingsley |
Quality Assurance
Subsystem Test
Core Optics
|
09 Jul 2010 |
| D1001741-x0 |
SLC ARM CAVITY BAFFLE MOUNTING-LASTI |
Niem Nguyen |
Modelling
Auxiliary Optics
|
09 Jul 2010 |
| D1001739-x0 |
SLC ARM CAVITY BAFFLE STAGE 0 MOUNTING FOR LASTI |
Niem Nguyen |
Auxiliary Optics
Modelling
|
09 Jul 2010 |
| D1001724-x0 |
CHASSIS FAN MODULE SHIELD |
Emery Brown |
Fabrication
Data Acquisition System
|
08 Jul 2010 |
| D1001723-x0 |
CHASSIS FAN MODULE |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001719-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001718-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Fabrication
Data Acquisition System
|
08 Jul 2010 |
| D1001717-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001716-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001713-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D1001708-x0 |
I/O EXPANSION CHASSIS |
Emery Brown |
Data Acquisition System
Fabrication
|
08 Jul 2010 |
| D080221-v2 |
Guard, Lower Blade, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
07 Jul 2010 |
| D0900947-v4 |
Adapter A-17, 44 5/8" I.D. x 72 1/4" I.D., LIGO Vacuum Equipment |
Dennis Coyne et al. |
Final Design
Vacuum
System Engineering
|
06 Jul 2010 |
| D0900666-v2 |
Base Plate, Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Jul 2010 |
| T0900499-v19 |
Sensitivity to Gravitational Waves from Compact Binary Coalescences Achieved during LIGO's Fifth and Virgo's First Science Run |
Alan Weinstein et al. |
Detector
Compact Binaries
|
30 Jun 2010 |
| G1000659-v3 |
Concepts for third generation Gravitational Wave detectors |
Stefan Hild |
Detector
|
30 Jun 2010 |
| T1000308-v1 |
AOS: Stray Light Control (SLC)-- Output Faraday Isolator FDR Responses |
Michael Smith et al. |
Auxiliary Optics
Final Design
|
29 Jun 2010 |
| D1000518-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel1 (LHO) |
Craig Conley |
Auxiliary Optics
|
29 Jun 2010 |
| D1000519-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel2 (LHO) |
Craig Conley |
Auxiliary Optics
|
29 Jun 2010 |
| D1000520-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel3 (LHO) |
Craig Conley |
Auxiliary Optics
|
29 Jun 2010 |
| D0902348-v1 |
PLATE, ETM MIRROR STOP, COC CONTAINER |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D1001349-x0 |
aLIGO_Manifold_Cryo_Baffle_Envelope |
Heidy Kelman |
Auxiliary Optics
Basic R&D
|
29 Jun 2010 |
| D0902246-v4 |
TOP PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902152-v1 |
SHIPPING SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902151-v1 |
OUTER SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902150-v2 |
UPPER LOCATING SLEEVE, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902148-v2 |
WEDGE PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902147-v3 |
BASE PLATE, ETM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902145-v1 |
SHIPPING SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902144-v1 |
OUTER SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902143-v2 |
UPPER LOCATING SLEEVE, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0900764-v2 |
EOM/AOM Driver Rear Mouting Plate |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902142-v2 |
LOCATING SHAFT, R OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D1001659-v1 |
EOM/AOM Driver Rear Mouting Plate Adapter 2 |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902140-v3 |
TOP PLATE, R OPTIC, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D1001658-v1 |
EOM/AOM Driver Rear Mouting Plate Adapter 1 |
Daniel Sigg |
Sensing and Control
|
29 Jun 2010 |
| D0902139-v3 |
BASE PLATE, R OPTIC, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902128-v1 |
SHIPPING SLEEVE, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902126-v1 |
OUTER SLEEVE, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902124-v2 |
LOCATING SHAFT, FM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902121-v3 |
BASE PLATE, FM, COC CONTAINER |
Kurt Buckland |
System Engineering
Core Optics
|
29 Jun 2010 |
| D0902490-v1 |
Cover, Centryco CC-025-0050-013-DAE, Advanced LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D0902330-v1 |
PILOT FOR CC-025-0050-013-DAE COVER |
Kurt Buckland |
Core Optics
System Engineering
|
29 Jun 2010 |
| D1000424-x0 |
aLIGO AOS OpLev TX Pier Side Panel (TM-LHO) |
Craig Conley |
Auxiliary Optics
|
28 Jun 2010 |
| D1001576-x0 |
aLIGO AOS OpLev RX Support Bracket |
Norris Kilpatrick |
Auxiliary Optics
|
28 Jun 2010 |
| D0902495-v2 |
GUIDE, OPTIC, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
28 Jun 2010 |
| D0902331-v1 |
RETAINER FOR CC-025-0050-013-DAE COVER |
Kurt Buckland |
Core Optics
System Engineering
|
28 Jun 2010 |
| D0902028-v2 |
THRUST PAD, WEDGE PLATE CLAMP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0902027-v3 |
PULL HANDLE, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0902026-v3 |
CLAMP, WEDGE PLATE, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901889-v3 |
UPPER LOCATING SLEEVE, CP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901885-v4 |
WEDGE PLATE, CP, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0902016-v1 |
SHIPPING SLEEVE, CP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901890-v4 |
OUTER SLEEVE, CP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901887-v3 |
LOCATING SHAFT, CP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901884-v6 |
TOP PLATE, CP, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D0901883-v6 |
BASE PLATE, CP, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| E0900363-v5 |
ADVANCED LIGO ETM COC CONTAINER ASSEMBLY BOM |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| E0900362-v3 |
ADVANCED LIGO R OPTIC COC CONTAINER ASSEMBLY BOM |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| E0900361-v4 |
ADVANCED LIGO FM COC CONTAINER ASSEMBLY BOM |
Kurt Buckland |
System Engineering
|
28 Jun 2010 |
| D1001440-v2 |
PRO E FILES FROM RAL JUNE 2010 |
Joe ODell |
System Engineering
|
25 Jun 2010 |
| T0900324-v2 |
Design Equations for Initially Flat Blade Springs at Arbitrary Mounting Angles |
Michael Smith |
Auxiliary Optics
Preliminary Design
|
24 Jun 2010 |
| D1001630-x0 |
aLIGO AOS OpLev Small Telescope Mount |
Craig Conley |
Auxiliary Optics
|
24 Jun 2010 |
| D1001610-x0 |
SLC ARM CAVITY BAFFLE SIDE ANGLE INTERFACE PLATE |
Niem Nguyen |
Modelling
Auxiliary Optics
|
21 Jun 2010 |
| E1000221-v1 |
Material Qualification RGA Test Results: Ferro Corporation RM108 Frit |
Dennis Coyne et al. |
Auxiliary Optics
Vacuum
|
17 Jun 2010 |
| D1001324-x0 |
aLIGO AOS OpLev RX Enclosure Cover RH (TM) |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001318-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (TM) |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001307-x0 |
aLIGO AOS OpLev RX Enclosure RH (TM) |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001020-x0 |
aLIGO AOS OpLev RX Enclosure Cover LH (TM) |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001019-x0 |
aLIGO AOS OpLev RX Enclosure LH (TM) |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001022-x0 |
aLIGO AOS OpLev TX Enclosure Access Panel |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1001593-x0 |
aLIGO AOS OpLev Detector Envelope |
Craig Conley |
Auxiliary Optics
|
16 Jun 2010 |
| D1000945-v2 |
ALIGO TEST MASS RING HEATER ASSEMBLY |
Mindy Jacobson et al. |
Final Design
Fabrication
Preliminary Design
Auxiliary Optics
|
15 Jun 2010 |
| D1001016-v1 |
ALIGO TEST MASS RING HEATER WIRE PLATE |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Fabrication
Auxiliary Optics
|
14 Jun 2010 |
| D1000970-v1 |
ALIGO TEST MASS RING HEATER SUPPORT BLOCK |
Mindy Jacobson et al. |
Input Optics
Final Design
|
14 Jun 2010 |
| D1000956-v1 |
ALIGO TEST MASS RING HEATER WIRE INTERSECTION BLOCK |
Mindy Jacobson et al. |
Preliminary Design
Final Design
Fabrication
Auxiliary Optics
|
14 Jun 2010 |
| D1001513-x0 |
SLC ARM CAVITY BAFFLE INNER WELDMENT |
Niem Nguyen |
Modelling
Auxiliary Optics
|
11 Jun 2010 |
| D080663-v3 |
D080663_AdLIGO_COC_F-PR3_SUBSTRATE |
Calum Torrie |
Final Design
Core Optics
|
09 Jun 2010 |
| D1001021-x0 |
aLIGO AOS OpLev TX Enclosure Cover |
Craig Conley |
Auxiliary Optics
|
06 Jun 2010 |
| D1000648-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (TM) |
Craig Conley |
Auxiliary Optics
|
06 Jun 2010 |
| E1000198-v1 |
Optical Contamination Cavity Test Results: Optek OP232 Emitter and Centronics BPX65 |
Liyuan Zhang et al. |
System Engineering
Vacuum
Suspensions
|
04 Jun 2010 |
| E1000201-x0 |
DCN ETM Telescope Secondary Parabolic Mirror, ADLIGO, v5 |
Michael Smith |
Preliminary Design
Auxiliary Optics
|
04 Jun 2010 |
| D1000130-v3 |
RF Distribution Amplifier Mounting Plate |
Daniel Sigg |
Sensing and Control
|
04 Jun 2010 |
| E1000199-v1 |
Material Qualification RGA Test Results: Optek OP232 Emitter and Centronics BPX65 |
Dennis Coyne et al. |
System Engineering
Vacuum
Suspensions
|
04 Jun 2010 |
| D1000423-x0 |
aLIGO AOS OpLev TX Pier Weldment (TM-LHO) |
Craig Conley |
Auxiliary Optics
|
03 Jun 2010 |
| E1000194-v1 |
Optical Contamination Cavity Test Results: Nichrome Wire wrapped on a fused silica rod (heated) |
Dennis Coyne |
Vacuum
System Engineering
|
02 Jun 2010 |
| E1000179-v1 |
Optical Contamination Cavity Test Results: Semitron ESd 480 PEEK from Boedeker Plastics |
Liyuan Zhang et al. |
Vacuum
Suspensions
|
02 Jun 2010 |
| E1000170-v1 |
Optical Contamination Cavity Test Results: Vishay IR-LED TSTS7100 |
Liyuan Zhang et al. |
Suspensions
Vacuum
|
02 Jun 2010 |
| T1000293-v1 |
aLIGO AOS OpLev RX Pier Assemblies [(PR3, SR3) - (LHO, LLO)] WORK LIST |
Craig Conley |
Auxiliary Optics
|
01 Jun 2010 |
| T1000289-v1 |
aLIGO AOS OpLev TRX Pier Assemblies [(BS, FM) - (LHO, LLO)] WORK LIST |
Craig Conley |
Auxiliary Optics
|
01 Jun 2010 |
| D1001414-x0 |
Faraday Isolator Prism Block-LH |
Niem Nguyen |
Modelling
Auxiliary Optics
|
01 Jun 2010 |
| D1001413-x0 |
Faraday Isolator Prism Block-RH |
Niem Nguyen |
Auxiliary Optics
Modelling
|
01 Jun 2010 |
| E0900016-v1 |
Integration Plan Slave Module Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
29 May 2010 |
| E090002-v1 |
Chassis Integration Plan Master and FanOut Modules Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
29 May 2010 |
| D0900358-v1 |
Faraday Isolator Wedge Window Plate Holder |
Niem Nguyen |
Modelling
Auxiliary Optics
|
28 May 2010 |
| D080664-v3 |
D080664_AdLIGO_COC_SR3_SUBSTRATE |
Calum Torrie |
Final Design
Core Optics
|
28 May 2010 |
| D080662-v3 |
D080662_ALIGO COC_PR3_SUBSTRATE |
Calum Torrie |
Final Design
Core Optics
|
28 May 2010 |
| D080661-v4 |
D080661_ALIGO COC_FM_SUBSTRATE |
Calum Torrie |
Core Optics
Final Design
|
28 May 2010 |
| T1000284-x0 |
Signal loss estimation using mode mismatch |
Hiro Yamamoto |
Modelling
Core Optics
|
27 May 2010 |
| D0902754-v1 |
Faraday Isolator Picomotor Motion Mass Control Assy |
Niem Nguyen |
Modelling
Auxiliary Optics
|
27 May 2010 |
| D0902755-v1 |
Faraday Isolator Picomotor 8330 Pivot Bracket |
Niem Nguyen |
Modelling
Auxiliary Optics
|
27 May 2010 |
| D0902750-v1 |
Farady Isolator Picomotor Pivot Lever |
Niem Nguyen |
Modelling
Auxiliary Optics
|
27 May 2010 |
| D1001392-x0 |
aLIGO AOS OpLev RX Breadboard |
Craig Conley |
Auxiliary Optics
|
27 May 2010 |
| E0900111-v1 |
Test Mass Barrel gold coating specification - obsolete |
Peter Fritschel |
Final Design
Auxiliary Optics
Core Optics
System Engineering
|
26 May 2010 |
| D0900624-v1 |
Faraday Isolator Table Hanger Assembly |
Niem Nguyen |
Auxiliary Optics
Modelling
|
26 May 2010 |
| D0900584-v1 |
Faraday Isolator Upper Music Wire |
Niem Nguyen |
Auxiliary Optics
Modelling
|
26 May 2010 |
| D0900356-v1 |
Faraday Isolator Wedge Set Screw #1 1/8-20 UN |
Niem Nguyen |
Auxiliary Optics
Modelling
|
26 May 2010 |
| D0902753-v1 |
Faraday Isolator Picomotor Linear Travel Bracket |
Niem Nguyen |
Auxiliary Optics
Modelling
|
25 May 2010 |
| D0902752-v1 |
Faraday Isolator Picomotor Mounting Bracket |
Niem Nguyen |
Auxiliary Optics
Modelling
|
25 May 2010 |
| D0900165-v1 |
Faraday Isolator Counter Mass Block |
Niem Nguyen |
Modelling
Auxiliary Optics
|
25 May 2010 |
| D0900143-v1 |
Faraday Isolator Wire Lower Bridge |
Niem Nguyen |
Auxiliary Optics
Modelling
|
25 May 2010 |
| D0900147-v1 |
Faraday Isolator Wire Lower Plate |
Niem Nguyen |
Modelling
Auxiliary Optics
|
25 May 2010 |
| D0900355-v1 |
Faraday Isolator Wedge Rotating Fixture |
Niem Nguyen |
Auxiliary Optics
Modelling
|
25 May 2010 |
| T1000191-v1 |
Output Faraday Isolator Drawing Package |
Michael Smith et al. |
Auxiliary Optics
Final Design
|
24 May 2010 |
| D1001333-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly RH (ETMX-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001332-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly RH (ETMX-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001331-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly RH (ITMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001329-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly LH (ETMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001328-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly LH (ETMY-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001327-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly LH (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001326-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Assembly LH (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001323-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (ETMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001322-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (ETMX-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001321-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (ETMX-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001320-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (ITMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001319-x0 |
aLIGO AOS OpLev RX Enclosure Base RH (ITMY-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001317-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (ETMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001316-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (ETMY-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001315-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001314-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001313-x0 |
aLIGO AOS OpLev RX Enclosure Base LH (ITMX-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001312-x0 |
aLIGO AOS OpLev RX Enclosure RH (ETMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001311-x0 |
aLIGO AOS OpLev RX Enclosure RH (ETMX-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001310-x0 |
aLIGO AOS OpLev RX Enclosure RH (ETMX-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001309-x0 |
aLIGO AOS OpLev RX Enclosure RH (ITMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001308-x0 |
aLIGO AOS OpLev RX Enclosure RH (ITMY-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001306-x0 |
aLIGO AOS OpLev RX Enclosure LH (ETMY-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001305-x0 |
aLIGO AOS OpLev RX Enclosure LH (ETMY-H1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001304-x0 |
aLIGO AOS OpLev RX Enclosure LH (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001303-x0 |
aLIGO AOS OpLev RX Enclosure LH (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001302-x0 |
aLIGO AOS OpLev RX Enclosure LH (ITMX-L1) |
Craig Conley |
Auxiliary Optics
|
23 May 2010 |
| D1001300-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment RH (ETMX-L1) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001299-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment RH (ETMX-H1) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001298-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment RH (ITMY-L1) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001296-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (ETMY-L1) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001295-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (ETMY-H1) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001294-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001293-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
22 May 2010 |
| D1001290-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment RH (ETMX-L1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001289-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment RH (ETMX-H1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001288-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment RH (ITMY-L1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001287-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment RH (ITMY-H1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001286-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ETMY-L1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001285-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ETMY-H1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001284-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001283-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001282-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ITMX-L1) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001281-x0 |
aLIGO AOS Pier Base 6 (LLO) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001280-x0 |
aLIGO AOS Pier Base 5 (LLO) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1001279-x0 |
aLIGO AOS Pier Base 4 (LLO) |
Craig Conley |
Auxiliary Optics
|
21 May 2010 |
| D1000375-v1 |
aLIGO AOS Fully Detailed & Envelope for OpLev & Pcal Installations (ETMY- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1000323-v1 |
aLIGO AOS Fully Detailed & Envelope for OpLev & Pcal Installations (ETMX- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1001265-x0 |
aLIGO AOS OptLev & PhotCal RX Pier Foundation RH |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1000837-x0 |
aLIGO AOS OptLev & PhotCal RX Pier Foundation LH |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1000579-x0 |
aLIGO AOS PhotCal RX Mounting Plate RH |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1000641-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment LH (ITMX-H1) |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1001262-x0 |
aLIGO AOS OpLev & PhotCal RX Face Panel Weldment RH (ITMX-H2) |
Craig Conley |
Auxiliary Optics
|
20 May 2010 |
| D1001243-x0 |
TCS Customized OTS Ring Heater Element |
Mindy Jacobson |
Auxiliary Optics
Preliminary Design
|
19 May 2010 |
| D0902632-v7 |
MCA Spool |
John Worden et al. |
Vacuum
|
18 May 2010 |
| D0902631-v5 |
MCB Spool |
John Worden et al. |
Vacuum
|
18 May 2010 |
| D0900948-v3 |
Adapter A-18, 60 1/2" I.D. x 72 1/4" I.D., LIGO Vacuum Equipment |
Dennis Coyne et al. |
Vacuum
System Engineering
Final Design
|
18 May 2010 |
| D1001234-x0 |
aLIGO AOS OpLev Periscope Assembly Envelope (BS, FM) |
Craig Conley |
Auxiliary Optics
|
18 May 2010 |
| D1001233-x0 |
aLIGO AOS OpLev TRX Assembly Envelope (BS, FM) |
Craig Conley |
Auxiliary Optics
|
18 May 2010 |
| D1000578-x0 |
aLIGO AOS PhotCal RX Mounting Plate LH |
Craig Conley |
Auxiliary Optics
|
16 May 2010 |
| D080008-v2 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, LOWER EQ STOP PLATE |
Joe ODell |
Suspensions
|
14 May 2010 |
| D1001174-x0 |
aLIGO AOS OpLev TX Assembly Envelope (PR3, SR3) |
Craig Conley |
Auxiliary Optics
|
13 May 2010 |
| T080014-v2 |
UK Top Driver Pre-Production Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
12 May 2010 |
| G1000391-v1 |
LIGO : The Laser Interferometer Gravitational Wave Observatory |
Michael Landry et al. |
Detector
Public Talk / Colloquium
|
12 May 2010 |
| S0900359-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900358-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900357-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900356-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900355-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900353-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900352-v2 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
11 May 2010 |
| S0900351-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900350-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900349-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900348-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900346-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900344-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900343-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| D1000188-v1 |
44 5/8" Grooved and slotted flange |
John Worden et al. |
Vacuum
|
11 May 2010 |
| E1000159-x0 |
DCN for Advanced LIGO Thin Compensation Plate polishing specification |
GariLynn Billingsley |
Final Design
Core Optics
|
10 May 2010 |
| D1001119-x0 |
SLC ARM CAVITY BAFFLE TUBE MTG PLATE DUMMY |
Niem Nguyen |
Modelling
Auxiliary Optics
|
10 May 2010 |
| D1001115-x0 |
SLC ARM CAVITY BAFFLE TUBE MTG PLATE DUMMY |
Niem Nguyen |
Auxiliary Optics
Modelling
|
10 May 2010 |
| D1001114-x0 |
SLC ARM CAVITY BAFFLE TUBE ADJUSTA WELDMENT DUMMY |
Niem Nguyen |
Auxiliary Optics
Modelling
|
10 May 2010 |
| D0901846-v5 |
Low Noise Power Module |
Daniel Sigg |
Sensing and Control
|
07 May 2010 |
| D0902522-v2 |
OVERSIZE LOCATING SLEEVE, R OPTIC, COC CONTAINER |
Kurt Buckland |
System Engineering
|
07 May 2010 |
| D0902521-v2 |
OVERSIZE LOCATING SLEEVE, FM, COC CONTAINER |
Kurt Buckland |
System Engineering
|
07 May 2010 |
| D0902520-v2 |
OVERSIZE LOCATING SLEEVE, CP, COC CONTAINER |
Kurt Buckland |
System Engineering
|
07 May 2010 |
| E1000141-v1 |
DCN to update COC container locating sleeves and incorporate thin compensation plate (TCP) substrate. |
Kurt Buckland |
Core Optics
System Engineering
|
06 May 2010 |
| E1000139-x0 |
DCN to release new TCP (thin compensation plate) substrate, TCP substrate assembly, Gold coating pattern and COC container adapter |
Kurt Buckland |
Core Optics
System Engineering
|
06 May 2010 |
| D0902138-v3 |
ASSEMBLY, R OPTIC, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
04 May 2010 |
| D0902120-v3 |
ASSEMBLY, FM, COC OPTIC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
04 May 2010 |
| D1001025-v1 |
SHIPPING SLEEVE, TCP, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
System Engineering
Core Optics
|
04 May 2010 |
| D1000958-v1 |
aLIGO, TCP (THIN COMPENSATION PLATE) SUBSTRATE ADAPTER |
Kurt Buckland |
Core Optics
System Engineering
|
04 May 2010 |
| D1000885-v1 |
SLC FOLD MIRROR ELLIP BAFFLE WITH STANDOFFS |
Niem Nguyen |
Auxiliary Optics
Modelling
|
04 May 2010 |
| D060370-v2 |
STRAIGHTENING TOOLING ASSY - QUAD TOP STAGE BLADE TOOLING |
Joe ODell |
Suspensions
|
03 May 2010 |
| D1000719-v1 |
aLIGO AOS PhotCal TX Assembly Envelope (TM) |
Craig Conley |
Auxiliary Optics
|
03 May 2010 |
| D1000412-v1 |
aLIGO AOS OpLev & Pcal RX Assembly Envelope (TM) |
Craig Conley |
Auxiliary Optics
|
03 May 2010 |
| D1000319-v1 |
aLIGO AOS OpLev TX Assembly Envelope (TM) |
Craig Conley |
Auxiliary Optics
|
03 May 2010 |
| D047824-v5 |
Clamp for L4C in pod |
Fabrice Matichard |
Seismic Isolation
Final Design
|
30 Apr 2010 |
| T1000226-v2 |
Marginally stable cavity simulation : FFT vs Modal Model |
Hiro Yamamoto |
Core Optics
Modelling
|
29 Apr 2010 |
| G1000478-v2 |
LIGO Clean and Bake Best Practices |
Jodi Fauver |
System Engineering
|
28 Apr 2010 |
| D1000790-v1 |
aLIGO AOS BSC5-H2, XYZ Global CS for ETMX Pcal TX Installation |
Craig Conley |
Auxiliary Optics
|
27 Apr 2010 |
| D1001034-x0 |
aLIGO AOS Fully Detailed & Envelope for Pcal TX Installations (ETMY- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
27 Apr 2010 |
| D1001033-x0 |
aLIGO AOS BSC6-H2, XYZ Global CS for ETMY Pcal TX Installation |
Craig Conley |
Auxiliary Optics
|
27 Apr 2010 |
| D1001023-x0 |
aLIGO AOS OpLev TX Enclosure |
Craig Conley |
Auxiliary Optics
|
26 Apr 2010 |
| M030100-v1 |
Laser Safety Plan UF High Power Laser Facility at the LLO |
David Tanner et al. |
Safety
Laser Systems
|
23 Apr 2010 |
| D1000397-x0 |
aLIGO AOS BSC10-H1 BSC5-L1, XYZ Global CS for ETMY Oplev & Pcal RX Installation |
Craig Conley |
Auxiliary Optics
|
22 Apr 2010 |
| D1000381-x0 |
aLIGO AOS BSC6-H2, XYZ Global CS for ETMY Oplev & Pcal RX Installation |
Craig Conley |
Auxiliary Optics
|
22 Apr 2010 |
| G1000484-v1 |
Effects of small size anomalies in a FP cavity |
Hiro Yamamoto |
Modelling
Core Optics
|
22 Apr 2010 |
| T1000096-v1 |
Test on Super Luminescent LED as a Light Source for Optical Lever System |
Cheryl Vorvick et al. |
Auxiliary Optics
|
22 Apr 2010 |
| G1000483-v1 |
RM3 size and astigmatism of AdvVirgo stable cavity |
Hiro Yamamoto |
Core Optics
Modelling
|
22 Apr 2010 |
| T1000218-v3 |
RM3 size and astigmatism of AdvVirgo stable cavity |
Hiro Yamamoto |
Core Optics
Modelling
|
22 Apr 2010 |
| D1000773-v1 |
aLIGO AOS BSC9-H1 BSC4-L1, XYZ Global CS for ETMX Pcal TX Installation |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000322-v1 |
aLIGO AOS BSC5-H2, XYZ Global CS for ETMX Oplev TX Installation |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000321-v1 |
aLIGO AOS BSC9-H1 BSC4-L1, XYZ Global CS for ETMX Oplev TX Installation |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000793-v1 |
aLIGO AOS Fully Detailed & Envelope for Pcal TX Installations (ETMX- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000356-v1 |
aLIGO AOS BSC5-H2, XYZ Global CS for ETMX Oplev & Pcal RX Installation |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000354-v1 |
aLIGO AOS BSC9-H1 BSC4-L1, XYZ Global CS for ETMX Oplev & Pcal RX Installation |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000378-v1 |
aLIGO AOS Fully Detailed & Envelope for OpLev TX Installations (ETMX- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
17 Apr 2010 |
| D1000894-x0 |
aLIGO AOS Pier Base 6 (LHO) |
Craig Conley |
Auxiliary Optics
|
12 Apr 2010 |
| E1000127-x0 |
Output Faraday Isolator Installation Procedure |
Michael Smith |
Final Design
Auxiliary Optics
|
12 Apr 2010 |
| D1000893-x0 |
aLIGO AOS Pier Base 5 (LHO) |
Craig Conley |
Auxiliary Optics
|
12 Apr 2010 |
| D0902637-v1 |
LLO Vacuum Bake Oven Lid Cart |
Michael Meyer |
Final Design
Observatory Facilities
|
12 Apr 2010 |
| D0902107-v1 |
Vacuum Bell Jar Saddle |
Michael Meyer |
Final Design
Observatory Facilities
|
12 Apr 2010 |
| T1000154-v5 |
Effects of small size anomalies in a FP cavity |
Hiro Yamamoto |
Modelling
Core Optics
|
10 Apr 2010 |
| E0900411-v4 |
Specification for Vacuum Equipment Design and Fabrication |
John Worden et al. |
Vacuum
|
08 Apr 2010 |
| E1000117-x0 |
DCN: Output Faraday Rotator component specification |
Michael Smith |
Auxiliary Optics
Final Design
|
06 Apr 2010 |
| E1000108-v1 |
DCN - Manufacture Porcelain Coated Test Plates |
Heidy Kelman |
Auxiliary Optics
Fabrication
|
05 Apr 2010 |
| D0902578-v1 |
Squeezer Controls Chassis A |
Daniel Sigg |
Data Acquisition System
|
03 Apr 2010 |
| D0902579-v1 |
Squeezer Controls Chassis B |
Daniel Sigg |
Data Acquisition System
|
03 Apr 2010 |
| D1000800-x0 |
aLIGO AOS BSC10-H1 BSC5-L1, XYZ Global CS for ETMY Pcal TX Installation |
Craig Conley |
Auxiliary Optics
|
02 Apr 2010 |
| D1000353-x0 |
aLIGO AOS OpLev & Pcal RX Installation Envelope (ETMX- H1, L1) |
Craig Conley |
Auxiliary Optics
|
01 Apr 2010 |
| D1000382-x0 |
aLIGO AOS OpLev & Pcal RX Installation Envelope (ETMY- H1, L1) |
Craig Conley |
Auxiliary Optics
|
01 Apr 2010 |
| D1000415-x0 |
aLIGO AOS OpLev RX Installation Envelope (ITMY- H1, L1) |
Craig Conley |
Auxiliary Optics
|
01 Apr 2010 |
| D1000379-x0 |
aLIGO AOS Fully Detailed & Envelope for OpLev TX Installations (ETMY- LHO, LLO) |
Craig Conley |
Auxiliary Optics
|
01 Apr 2010 |
| D1000376-x0 |
aLIGO AOS BSC10-H1 BSC5-L1, XYZ Global CS for ETMY Oplev TX Installation |
Craig Conley |
Auxiliary Optics
|
01 Apr 2010 |
| L1000145-v2 |
aLIGO PS-130 - Laser Area Enclosure RFI Solicitation Letter - Clean Rooms West |
Alan Wilkins et al. |
Letters
Laser Systems
Procurements
|
30 Mar 2010 |
| E1000097-v1 |
ETM TransMon Telescope SUS Installation Plan |
Ken Mailand |
Installation
Auxiliary Optics
|
30 Mar 2010 |
| T1000170-x0 |
Installation Plan Transmon_Telescope_SUS |
Ken Mailand |
Auxiliary Optics
Installation
|
30 Mar 2010 |
| D1000532-x0 |
aLIGO AOS Pier Footing 2 |
Craig Conley |
Auxiliary Optics
|
29 Mar 2010 |
| D1000530-x0 |
aLIGO AOS OpLev & PhotCal RX Pier [ETMY-H1] |
Craig Conley |
Auxiliary Optics
|
29 Mar 2010 |
| D1000647-x0 |
aLIGO AOS PhotCal RX Optical Table LH |
Craig Conley |
Auxiliary Optics
|
26 Mar 2010 |
| T1000151-v2 |
LIGO and the MIT Kavli Institute |
David Shoemaker |
Reviews
Education, Outreach
Detector
Data Analysis
|
26 Mar 2010 |
| T1000157-v1 |
Optical Lever: Longterm test of the Laser Diode |
Tara Chalermsongsak et al. |
Auxiliary Optics
|
25 Mar 2010 |
| D1000521-x0 |
aLIGO AOS Pier Base 2 (LHO) |
Craig Conley |
Auxiliary Optics
|
24 Mar 2010 |
| D0900852-v1 |
aLIGO AOS Pier Installation Template Plate |
Craig Conley |
Auxiliary Optics
|
24 Mar 2010 |
| D0900899-v1 |
aLIGO AOS Pier Installation Template Assembly |
Craig Conley |
Auxiliary Optics
|
24 Mar 2010 |
| D1000671-x0 |
aLIGO AOS Pier Foundation 3 |
Craig Conley |
Auxiliary Optics
|
24 Mar 2010 |
| D1000523-x0 |
aLIGO AOS OpLev RX Mounting Base |
Craig Conley |
Auxiliary Optics
|
22 Mar 2010 |
| D1000652-x0 |
aLIGO AOS OpLev RX Cover Box |
Craig Conley |
Auxiliary Optics
|
22 Mar 2010 |
| D1000640-x0 |
aLIGO AOS OpLev Sensor Cover |
Craig Conley |
Auxiliary Optics
|
21 Mar 2010 |
| D1000443-v1 |
TTFSS RF - Squeezer Edition |
Daniel Sigg et al. |
Laser Systems
|
21 Mar 2010 |
| P070082-v4 |
LIGO: The Laser Interferometer Gravitational-Wave Observatory |
Peter Fritschel |
Detector
|
21 Mar 2010 |
| D1000639-x0 |
aLIGO AOS OpLev RX Mounting Plate [ETMY-H1] |
Craig Conley |
Auxiliary Optics
|
19 Mar 2010 |
| E1000061-v2 |
Specifications for the Harmonic Generator |
Daniel Sigg |
Sensing and Control
|
19 Mar 2010 |
| D1000598-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment RH (LLO) |
Craig Conley |
Auxiliary Optics
|
17 Mar 2010 |
| D1000593-x0 |
aLIGO AOS OpLev & PhotCal RX Pier Weldment LH (LLO) |
Craig Conley |
Auxiliary Optics
|
17 Mar 2010 |
| D1000592-x0 |
aLIGO AOS Pier Base 2 (LLO) |
Craig Conley |
Auxiliary Optics
|
17 Mar 2010 |
| D1000591-x0 |
aLIGO AOS Pier Base 1 (LLO) |
Craig Conley |
Auxiliary Optics
|
17 Mar 2010 |
| T1000147-v1 |
TGG Crystal Wedge Angle for aLIGO Output Faraday Isolator |
Michael Smith |
Auxiliary Optics
Fabrication
|
17 Mar 2010 |
| D1000569-x0 |
CUSTOM CABLE V25K |
Emery Brown |
Fabrication
Sensing and Control
|
15 Mar 2010 |
| G1000309-v1 |
Optical lever for AdvLIGO |
Tara Chalermsongsak |
Auxiliary Optics
Meeting
|
15 Mar 2010 |
| T0900453-v2 |
ETM-Telescope, Comparison of Off-axis Parabolic Telescope with Spherical Mirror Secondary, or Triplet Lens |
Michael Smith |
Auxiliary Optics
Preliminary Design
|
12 Mar 2010 |
| D0902556-v1 |
EtherCAT LED Indicator |
Daniel Sigg |
Data Acquisition System
|
12 Mar 2010 |
| D0900305-v1 |
Timing IRIG-B Daughter Board |
Daniel Sigg |
Data Acquisition System
|
12 Mar 2010 |
| D0900304-v1 |
Timing IRIG-B Rear PCB |
Daniel Sigg |
Data Acquisition System
|
12 Mar 2010 |
| D1000546-x0 |
aLIGO_CENTER_SUPPORT_BRIDGE_FOR_THE_TELESCOPE_AND_TABLE |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
10 Mar 2010 |
| D1000545-x0 |
aLIGO_TransMon_ Wire_Attachment_Plate |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000544-x0 |
aLIGO_TransMon_Music_Wire_Adj_Brkt |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
10 Mar 2010 |
| D1000543-x0 |
aLIGO_TransMon_Music_Wire_Split_Clamp_CS |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| D1000542-x0 |
CENTER_SUPPORT_BRIDGE_FOR THE TELESCOPE AND TABLE_ASSEMBLY. |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
10 Mar 2010 |
| E1000080-v2 |
Coating, Contamination Cavity |
GariLynn Billingsley |
System Engineering
|
10 Mar 2010 |
| D1000533-x0 |
aLIGO AOS Pier Foundation 2 |
Craig Conley |
Auxiliary Optics
|
09 Mar 2010 |
| T1000126-v1 |
Automated Defect Counting Microscope - Initial Investigations |
Rand Dannenberg |
Basic R&D
Core Optics
|
09 Mar 2010 |
| D1000309-x0 |
Number relinquished |
Craig Conley |
Auxiliary Optics
|
08 Mar 2010 |
| T1000108-v2 |
Sucker plate o-ring tests |
Margot Hennig |
Core Optics
|
08 Mar 2010 |
| L1000094-v1 |
Design Review for ISC demodulator and in-vacuum quad detector |
Robert Schofield et al. |
Sensing and Control
|
05 Mar 2010 |
| T040189-v1 |
Common Mode Servo Board Test Procedure |
Daniel Sigg et al. |
Sensing and Control
|
04 Mar 2010 |
| D071496-v2 |
Asm, Fixture, GS-13 Install Horiz |
Andy Stein et al. |
Seismic Isolation
Final Design
|
04 Mar 2010 |
| D071425-v2 |
Asm, Keel Wall |
Andy Stein et al. |
Final Design
Seismic Isolation
|
04 Mar 2010 |
| D071423-v2 |
Asm, Pitchfork |
Andy Stein et al. |
Final Design
Seismic Isolation
|
04 Mar 2010 |
| D071422-v2 |
Asm, Boxwork |
Andy Stein et al. |
Final Design
Seismic Isolation
|
04 Mar 2010 |
| E1000063-x0 |
DCN ETM Telescope Primary Parabolic Mirror, ADLIGO |
Michael Smith |
Final Design
Detector
|
03 Mar 2010 |
| D1000232-v1 |
CUSTOM CABLE V25U |
Emery Brown |
Fabrication
Sensing and Control
|
02 Mar 2010 |
| T060040-v1 |
Quad Suspension Noise Prototype Assembly Procedure |
Ian Wilmut |
Final Design
Suspensions
|
02 Mar 2010 |
| D1000451-x0 |
aLIGO AOS OpLev TX Pier Table (ETM-H2) |
Craig Conley |
Auxiliary Optics
|
27 Feb 2010 |
| D1000446-x0 |
aLIGO AOS OpLev TX Pier Table (ETMY-H2) |
Craig Conley |
Auxiliary Optics
|
27 Feb 2010 |
| D1000445-x0 |
aLIGO AOS OpLev TX Pier Table (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
27 Feb 2010 |
| D1000440-v1 |
aLIGO ISC Whitening Filter Block Diagram |
Rich Abbott |
Sensing and Control
Conceptual Design
|
26 Feb 2010 |
| E980131-v1 |
Output Faraday Isolator, 20 mm Specification |
Michael Smith |
Auxiliary Optics
Final Design
|
26 Feb 2010 |
| E1000051-x0 |
DCN output Faraday isolator component specification |
Michael Smith |
Final Design
Auxiliary Optics
|
26 Feb 2010 |
| D1000432-x0 |
aLIGO AOS OpLev Mounting Height Spacer, .50 in |
Craig Conley |
Auxiliary Optics
|
25 Feb 2010 |
| D1000431-x0 |
aLIGO AOS OpLev Mounting Height Spacer, .25 in |
Craig Conley |
Auxiliary Optics
|
25 Feb 2010 |
| D1000430-x0 |
aLIGO AOS OpLev Mounting Height Spacer, .125 in |
Craig Conley |
Auxiliary Optics
|
25 Feb 2010 |
| D1000324-v1 |
Low Dropout Power Module |
Daniel Sigg |
Sensing and Control
|
25 Feb 2010 |
| D1000414-x0 |
aLIGO AOS OpLev RX Installation Envelope (ITMY-H2) |
Craig Conley |
Auxiliary Optics
|
23 Feb 2010 |
| D1000413-x0 |
aLIGO AOS OpLev RX Installation Envelope (ITMX-H2) |
Craig Conley |
Auxiliary Optics
|
23 Feb 2010 |
| P0900039-v2 |
A study of angular instability due to radiation pressure in LIGO gravitational wave detector |
Eiichi Hirose |
Sensing and Control
|
23 Feb 2010 |
| E0900485-x0 |
Document Change Notice (DCN) - LLO Vacuum Chamber Fixtures |
Michael Meyer |
Observatory Facilities
Final Design
|
23 Feb 2010 |
| D1000380-x0 |
aLIGO AOS OpLev & Pcal RX Installation Envelope (ETMY-H2) |
Craig Conley |
Auxiliary Optics
|
22 Feb 2010 |
| D1000355-x0 |
aLIGO AOS OpLev & Pcal RX Installation Envelope (ETMX-H2) |
Craig Conley |
Auxiliary Optics
|
18 Feb 2010 |
| D080369-v2 |
ADVANCED LIGO, SUS, THIS, BS ROUND BODY MASS, BEAMSPLITTER ROUND MASS |
Joe ODell |
Suspensions
|
18 Feb 2010 |
| D060278-v1 |
8 Channel SUS Coil Driver |
Jay Heefner |
Final Design
Suspensions
|
17 Feb 2010 |
| T0900651-v1 |
Stability of Beam Position between PC and APC Fiber under Vibration |
Tara Chalermsongsak et al. |
Auxiliary Optics
|
15 Feb 2010 |
| T1000070-v1 |
Optical Lever: Signal Instabilities due to Power Fluctuation |
Tara Chalermsongsak et al. |
Auxiliary Optics
|
15 Feb 2010 |
| G1000098-v2 |
Advanced LIGO Test Masses and Core Optics- Talk for AIGO Conference |
Gregg Harry |
Core Optics
Meeting
|
12 Feb 2010 |
| E970063-v1 |
LIGO Seismic Isolation System (SEI): Fabrication Process Specification |
Dennis Coyne |
Seismic Isolation
Vacuum
Fabrication
|
12 Feb 2010 |
| G1000103-v2 |
Provision of Space for LHO aLIGO Oplev & Photcal Installations |
Craig Conley |
Auxiliary Optics
|
11 Feb 2010 |
| E1000021-x0 |
CUSTOM CABLE V2A |
Emery Brown |
Sensing and Control
Fabrication
|
11 Feb 2010 |
| D1000307-x0 |
aLIGO AOS OpLev TX Pier Installation [ETMY H1] |
Craig Conley |
Auxiliary Optics
|
10 Feb 2010 |
| D1000306-x0 |
aLIGO AOS BSC10-H1, XYZ Global CS for ETMY Oplev Installation |
Craig Conley |
Auxiliary Optics
|
10 Feb 2010 |
| D070350-v1 |
Assembly Stand, HAM ISI |
Andy Stein |
Final Design
Seismic Isolation
|
09 Feb 2010 |
| G1000029-v1 |
Gravitational Waves and Precision Measurement |
Michael Smith |
Detector
Meeting
|
09 Feb 2010 |
| G1000096-v1 |
LIGO and the Search for Gravitational Waves |
David Reitze |
Detector
Data Analysis
|
08 Feb 2010 |
| D080052-v1 |
ALIGO RECYCLING MIRROR 2 BLANK |
Luke Williams |
Input Optics
Final Design
|
05 Feb 2010 |
| D080038-v1 |
ALIGO RECYCLING MIRROR 1 BLANK |
Luke Williams |
Final Design
Input Optics
|
05 Feb 2010 |
| E080039-v1 |
MIRROR BLANK MATERIAL, AdLIGO RECYCLING MIRROR 2 (RM2) |
Rodica Martin |
Final Design
Input Optics
|
05 Feb 2010 |
| E080028-v1 |
MIRROR BLANK MATERIAL, AdLIGO RECYCLING MIRROR 1 (RM1) |
Rodica Martin |
Final Design
Input Optics
|
05 Feb 2010 |
| E0900094-v4 |
Substrate, ALIGO Signal Recycling Mirror 2 (F-SR2) for H2 interferometer - folded |
Rodica Martin |
Input Optics
Final Design
Core Optics
|
05 Feb 2010 |
| E0900092-v4 |
Substrate, ALIGO Power Recycling Mirror 2 (F-PR2) for H2 interferometer - folded |
Rodica Martin |
Core Optics
Final Design
Input Optics
|
05 Feb 2010 |
| E0900090-v4 |
Substrate, ALIGO Signal Recycling Mirror (F-SRM) for H2 interferometer - folded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
05 Feb 2010 |
| E0900088-v4 |
Substrate, ALIGO Power Recycling Mirror (F-PRM) for H2 interferometer - folded |
Rodica Martin |
Core Optics
Input Optics
Final Design
|
05 Feb 2010 |
| D1000276-x0 |
LIGO VE A-15 Adapter |
Craig Conley |
Vacuum
|
04 Feb 2010 |
| D1000274-v1 |
FSS Fast HV Filter Panel |
Daniel Sigg |
Laser Systems
|
04 Feb 2010 |
| G1000094-v1 |
Advanced Virgo Thermal Compensation System |
Viviana Fafone |
Auxiliary Optics
|
04 Feb 2010 |
| D1000245-v1 |
IO Tubes CORNER STATION LAYOUT |
John Worden et al. |
Vacuum
|
02 Feb 2010 |
| T0900640-v2 |
Acceleration of the FFT simulation of stable cavity |
Hiro Yamamoto |
Core Optics
Modelling
|
01 Feb 2010 |
| E0900223-x0 |
DCN for AdLIGO TCS LASER ENCLOSURE |
Ken Mailand |
Auxiliary Optics
Final Design
|
01 Feb 2010 |
| E048225-v2 |
Process Specification for AdLIGO Seismic Isolation System In-Vacuum Mechanical Elements Fabrication |
Dennis Coyne |
Fabrication
Final Design
Seismic Isolation
|
30 Jan 2010 |
| G1000055-v1 |
Advanced LIGO Project Update for the aLIGO Team, Jan 2010 |
David Shoemaker |
Detector
Reports
|
29 Jan 2010 |
| G1000056-v1 |
Intro to LIGO and the role of cleanliness in LIGO vacuum fabrications |
Michael Zucker |
Vacuum
Requirements
Quality Assurance
|
28 Jan 2010 |
| D1000190-x0 |
Pod Testing Vacuum Chamber Cart |
Michael Meyer |
Observatory Facilities
Preliminary Design
|
28 Jan 2010 |
| D1000184-v1 |
IQ FET Demodulator Breakout |
Daniel Sigg |
Sensing and Control
|
28 Jan 2010 |
| E1000017-v1 |
DCN - Release of aLIGO AOS OpLev Small Telescope Mount |
Craig Conley |
Auxiliary Optics
|
28 Jan 2010 |
| D1000115-v1 |
aLIGO AOS OpLev Small Telescope Mount |
Craig Conley |
Auxiliary Optics
|
27 Jan 2010 |
| T1000032-v1 |
Absorption Characterization of an ion beam figured sample |
Ashot Markosyan |
Core Optics
|
26 Jan 2010 |
| D1000132-v1 |
aLIGO AOS OpLev Scope Mount Extension Screw |
Craig Conley |
Auxiliary Optics
|
25 Jan 2010 |
| D1000127-v1 |
aLIGO AOS OpLev Scope Mount Extension Screw |
Craig Conley |
Auxiliary Optics
|
25 Jan 2010 |
| T010074-v1 |
The LIGO Observatory Environment |
David Shoemaker |
System Engineering
|
25 Jan 2010 |
| D1000131-x0 |
RF Distribution Amplifier 1U Chassis |
Daniel Sigg |
Sensing and Control
|
25 Jan 2010 |
| D080366-v2 |
Viewport Guard Shield |
Michael Meyer |
Vacuum
Final Design
Observatory Facilities
|
24 Jan 2010 |
| E960085-v2 |
Specification for O-Ring Procurement |
John Worden et al. |
Fabrication
Vacuum
|
22 Jan 2010 |
| D1000121-x0 |
aLIGO AOS Optical Lever Small Telescope Assy |
Craig Conley |
Auxiliary Optics
|
21 Jan 2010 |
| E1000012-x0 |
Material, Process, Handling, and Shipping Specification for Molded PEEK Parts |
Michael Meyer |
Vacuum
System Engineering
Fabrication
|
19 Jan 2010 |
| D080391-v1 |
Viewport Guard Clamp |
Michael Meyer |
Vacuum
Final Design
|
19 Jan 2010 |
| E1000009-x0 |
DCN ETM Telescope Secondary Parabolic Mirror, ADLIGO |
Michael Smith |
Preliminary Design
Detector
|
15 Jan 2010 |
| D040423-v2 |
TTFSS Interface Board |
Daniel Sigg et al. |
Laser Systems
|
12 Jan 2010 |
| E0900439-v1 |
Specification for SS Bellows |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| E0900431-v1 |
Specification for O-Ring Installation |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| E0900430-v1 |
Specification for Cleanliness Testing |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| E0900429-v1 |
Specification for Raw Material Handling |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| E0900428-v1 |
Specification for Welding Repairs |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| D0902728-v1 |
Tie Rod assembly 1 1/4 inch |
John Worden et al. |
Vacuum
|
12 Jan 2010 |
| D0902687-v3 |
External Loads at Mid Station Spool |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| G0901032-v1 |
Photos of LIGO Facility |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D0902724-v2 |
84.25 IN Flange - Flat Faced (PSI Ref. V0494127) |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D0900928-v2 |
D0900928 Vacuum Equipment Layout, Right End Station, LHO, Adv. LIGO |
John Worden et al. |
System Engineering
Integration
Vacuum
|
11 Jan 2010 |
| D0902729-v1 |
Sample 60 inch Vacuum Test Cover |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D0902727-v1 |
Tie Rod assembly 1 inch |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D961105-v1 |
Grooved flange 84.25 inch (Ref V0494021) |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D961104-v1 |
Flange Grooved 72.25 inch (Ref V0494020 ) |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D961111-v1 |
Flange 60.5 inch Grooved and Slotted |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D970409-v1 |
Flange flat faced 60.5 inch (Ref V0494097) |
John Worden et al. |
Vacuum
|
11 Jan 2010 |
| D0902050-v2 |
TTFSS Interface Rear Panel |
Daniel Sigg et al. |
Laser Systems
|
11 Jan 2010 |
| D0902051-v2 |
TTFSS Interface Power Board |
Daniel Sigg et al. |
Laser Systems
|
11 Jan 2010 |
| D0902048-v3 |
TTFSS Interface |
Daniel Sigg et al. |
Laser Systems
|
11 Jan 2010 |
| F0900006-v2 |
LIGO Specification Template |
Dennis Coyne |
System Engineering
|
08 Jan 2010 |
| P1000002-v1 |
Scattered Light Control in Advanced LIGO |
Michael Smith |
Auxiliary Optics
|
07 Jan 2010 |
| E080137-v2 |
Coated Substrate, ALIGO PRE-MODE MATCHING TELESCOPE MIRROR #1 |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
06 Jan 2010 |
| E070084-v1 |
COMPONENT SPECIFICATION - SUBSTRATE, ALIGO STEERING MIRROR |
Rodica Martin et al. |
Preliminary Design
Input Optics
|
14 Sep 2009 |
| E080133-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO PRE-MODE MATCHING TELESCOPE MIRROR #1AND 2 (PMMT) |
Rodica Martin et al. |
Preliminary Design
Input Optics
|
11 Sep 2009 |
| E070077-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO STEERING MIRROR (SM) |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
11 Sep 2009 |
| E070072-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO INPUT MODE CLEANER CURVED MIRROR (IMCC) |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
11 Sep 2009 |
| E070071-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO INPUT MODE CLEANER FLAT MIRROR (IMCF) |
Rodica Martin et al. |
Preliminary Design
Input Optics
|
11 Sep 2009 |
| E0900408-v1 |
Specification for Welding Inspection. |
John Worden et al. |
Vacuum
|
05 Jan 2010 |
| E0900404-v1 |
Specification for Vacuum component leak checking. |
John Worden et al. |
Vacuum
|
05 Jan 2010 |
| E0900407-v2 |
Specification for Vacuum component Bake-Out |
John Worden et al. |
Vacuum
|
05 Jan 2010 |
| T030091-v1 |
Study of the wind behaviour in Hanford and its influence on the seismic motion excitation |
Riccardo DeSalvo et al. |
Detector
|
04 Jan 2010 |
| E0900409-v1 |
Specification for Black Light Inspection. |
John Worden et al. |
Vacuum
|
29 Dec 2009 |
| E0900403-v2 |
Specification for Vacuum component cleaning. |
John Worden et al. |
Vacuum
|
29 Dec 2009 |
| G0900991-v1 |
LIGO: Chasing After Gravitational Waves |
David Reitze |
Collaboration
Detector
Data Analysis
|
21 Dec 2009 |
| T0900647-v2 |
Ray optics calculations of alignment matrices |
Sam Waldman |
Sensing and Control
Modelling
|
18 Dec 2009 |
| T0900622-v1 |
ALIGO Physical Environment Monitoring Data Acquisition System Design |
Rolf Bork |
Data Acquisition System
|
18 Dec 2009 |
| S0900339-v2 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
18 Dec 2009 |
| S0900354-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
17 Dec 2009 |
| T0900637-v1 |
Fan Gasket for LLO Rack 6 |
David Kinzel |
Observatory Facilities
Conceptual Design
|
16 Dec 2009 |
| D0901917-v1 |
XYCOMM to Binary I/O Interface Schematic |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900341-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900340-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900342-v1 |
GS-13 Socket Board |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900316-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900317-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900318-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900319-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900320-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900321-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900322-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900323-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900325-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900327-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900328-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900329-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900330-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900331-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900332-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| S0900333-v1 |
GS13 Pre-Amp |
Samuel Abbott |
Seismic Isolation
|
16 Dec 2009 |
| D080723-v2 |
Cap Body, Resin, Earthquake Stop |
Derek Bridges |
Suspensions
Preliminary Design
|
15 Dec 2009 |
| T0900626-v1 |
LMA Computation of Surface E-Field Acheivable for Advanced LIGO ITM |
Rand Dannenberg |
Core Optics
Modelling
Fabrication
|
15 Dec 2009 |
| S0900102-v1 |
STS-2 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
14 Dec 2009 |
| D0900647-x0 |
Obsolete Number, Trillium 240 OBS |
Sam Barnum |
Seismic Isolation
Final Design
|
14 Dec 2009 |
| D0901918-v1 |
XYCOMM to Binary I/O Interface Board |
Samuel Abbott |
Seismic Isolation
|
11 Dec 2009 |
| S0900384-v1 |
STS-2-T240 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
10 Dec 2009 |
| E080543-v1 |
Master and FanOut Board Assembly Instructions Advanced LIGO |
Daniel Sigg et al. |
Data Acquisition System
|
09 Dec 2009 |
| D0900954-v1 |
Flat Faced Flange, 45.19" I.D. x 80" O.D., LIGO VE |
Dennis Coyne et al. |
Final Design
Vacuum
|
09 Dec 2009 |
| C0901007-v4 |
Statement of Work and Terms for HAM Cross Beam |
Rudy Arvizu |
Seismic Isolation
Procurements
|
09 Dec 2009 |
| T0900615-x0 |
TransMon-SUS Preliminary Est Task-Schedule-Cost |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
08 Dec 2009 |
| D060279-v1 |
Chassis Power Regulator Board |
Jay Heefner |
System Engineering
|
08 Dec 2009 |
| D0902630-v1 |
Mid Station Spool |
John Worden et al. |
Vacuum
|
07 Dec 2009 |
| D0902633-v1 |
Sample drawing package |
John Worden et al. |
Vacuum
|
07 Dec 2009 |
| D0900953-v1 |
Grooved and Slotted Flange, 44.25" I.D., LIGO VE |
Dennis Coyne et al. |
Final Design
Vacuum
|
07 Dec 2009 |
| D0900963-v1 |
Flat Faced Flange, 44 5/8" ID, LIGO VE |
Dennis Coyne et al. |
Final Design
Vacuum
|
07 Dec 2009 |
| D0900961-v1 |
Flat Faced Flange, 45.19" ID x 68.25" OD, LIGO VE |
Dennis Coyne et al. |
Vacuum
Final Design
|
07 Dec 2009 |
| D0902636-v1 |
Shipping Cover Air Purification System |
John Worden et al. |
Vacuum
|
07 Dec 2009 |
| S0900360-v1 |
STS-2-T240 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
04 Dec 2009 |
| D0902795-x0 |
aLIGO_Mezzanine_Lab_Floor_Layout |
Ken Mailand |
Auxiliary Optics
Installation
|
04 Dec 2009 |
| S0900363-v1 |
STS-2-T240 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
04 Dec 2009 |
| D070581-v1 |
Leg, HLTS Structural Weldment |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Dec 2009 |
| D070583-v1 |
Front Cross Beam, Thin, HLTS Structural Weldment |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Dec 2009 |
| D070584-v1 |
Side Cross Beam, Thin, HLTS Structural Weldment |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Dec 2009 |
| D080283-v1 |
Front Cross Beam, Thick, HLTS Structural Weldment |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Dec 2009 |
| D080282-v1 |
Side Cross Beam, Thick, HLTS Structural Weldment |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Dec 2009 |
| T0900593-x0 |
Trillium OBS Pod Assembly Procedure Adv LIGO BSC ISI |
Stephany Foley et al. |
Seismic Isolation
Final Design
|
25 Nov 2009 |
| T0900592-x0 |
GS-13 Pod Assembly Procedure for Adv LIGO BSC ISI |
Stephany Foley et al. |
Final Design
Seismic Isolation
|
25 Nov 2009 |
| D0902611-v1 |
aLIGO AOS OpLev & PhotCal RX Pier LH Mock-Up |
Craig Conley |
Auxiliary Optics
|
24 Nov 2009 |
| D0902693-v1 |
aLIGO AOS OpLev TX Pier Side Panel Mock-Up [ITM] |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902321-v1 |
aLIGO AOS OpLev TX Pier Side Panel Mock-Up [ETM] |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902326-v1 |
aLIGO AOS PhotCal TX Pier Side Panel Mock-Up [ETM] |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902327-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel1 Mock-Up |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902328-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel2 Mock-Up |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902329-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel3 Mock-Up |
Craig Conley |
Auxiliary Optics
|
23 Nov 2009 |
| D0902629-x0 |
Vacuum Spool A-18 |
John Worden |
Vacuum
|
23 Nov 2009 |
| D0902627-x0 |
Vacuum Spool A-16 |
John Worden |
Vacuum
|
23 Nov 2009 |
| D0902628-x0 |
Vacuum Spool A-17 |
John Worden |
Vacuum
|
23 Nov 2009 |
| D0902149-v2 |
LOCATING SHAFT, ETM, COC CONTAINER, ADVANCED LIGO |
Kurt Buckland |
Core Optics
System Engineering
|
20 Nov 2009 |
| D0902586-v1 |
EtherCAT Panel Common Mode |
Daniel Sigg |
Data Acquisition System
|
20 Nov 2009 |
| D0902702-v1 |
aLIGO AOS OpLev & PhotCal Pier Floor Template, 11.1 in |
Craig Conley |
Auxiliary Optics
|
19 Nov 2009 |
| D0902701-v1 |
aLIGO AOS OpLev & PhotCal Pier Floor Template, 42 in |
Craig Conley |
Auxiliary Optics
|
19 Nov 2009 |
| E0900421-v1 |
LAYOUT SHOWING THE ELEMENTS OF THE TRANSMON SUS |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
18 Nov 2009 |
| E0900399-x0 |
DCN - Release Drawings for Mock-ups of aLIGO AOS OpLev & PhotCal Piers |
Craig Conley |
Auxiliary Optics
|
18 Nov 2009 |
| T060156-v1 |
Enhanced LIGO |
Sam Waldman et al. |
Sensing and Control
|
18 Nov 2009 |
| D080468-v1 |
Screw, Socket Head Cap, #2-56 UNC-2A X 0.375 Long, Fully Threaded, Rounded End |
Derek Bridges |
Preliminary Design
System Engineering
|
18 Nov 2009 |
| D0902692-v1 |
aLIGO AOS OpLev TX Pier Mock-Up [ITM] |
Craig Conley |
Auxiliary Optics
|
18 Nov 2009 |
| D0902694-v1 |
aLIGO AOS OpLev TX Pier Table Mock-Up [ITM] |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0902322-v1 |
aLIGO AOS OpLev TX Pier Table Mock-Up [ETM] |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0902324-v1 |
aLIGO AOS Pier Base Mock-up, 42 in |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0902660-v1 |
aLIGO AOS OpLev TX Pier Mock-Up [ETM] |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0902325-v1 |
aLIGO AOS PhotCal TX BreadBoard Mock-up |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0902323-v1 |
aLIGO AOS Pier Base Mock-up, 11.1 in |
Craig Conley |
Auxiliary Optics
|
17 Nov 2009 |
| D0901899-v2 |
TTFSS Rear Panel |
Daniel Sigg et al. |
Laser Systems
|
13 Nov 2009 |
| D0901898-v2 |
TTFSS Front Panel |
Daniel Sigg et al. |
Laser Systems
|
13 Nov 2009 |
| D0902653-v1 |
High Voltage Guard |
Daniel Sigg et al. |
Laser Systems
|
13 Nov 2009 |
| D0902639-v1 |
aLIGO AOS OpLev & PhotCal RX Pier RH Mock-Up |
Craig Conley |
Auxiliary Optics
|
12 Nov 2009 |
| D0902650-v1 |
aLIGO AOS PhotCal TX Pier Mock-Up |
Craig Conley |
Auxiliary Optics
|
11 Nov 2009 |
| D0902640-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel1 RH Mock-Up |
Craig Conley |
Auxiliary Optics
|
11 Nov 2009 |
| D0902049-v1 |
TTFSS Interface Front Panel |
Daniel Sigg et al. |
Laser Systems
|
11 Nov 2009 |
| D0902642-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel3 RH Mock-Up |
Craig Conley |
Auxiliary Optics
|
10 Nov 2009 |
| D0902641-v1 |
aLIGO AOS OpLev & PhotCal RX Pier Side Panel2 RH Mock-Up |
Craig Conley |
Auxiliary Optics
|
10 Nov 2009 |
| D0902646-x0 |
Table_Beam_Dump_Small_ |
Ken Mailand |
Auxiliary Optics
Final Design
|
10 Nov 2009 |
| T0900573-v1 |
Impact of offsetting the CG of stage 1 BSC-ISI |
Brian Lantz |
Final Design
Seismic Isolation
|
10 Nov 2009 |
| D0902638-x0 |
LLO Vacuum Bake Oven Lid Cart Assembly |
Michael Meyer |
Preliminary Design
Observatory Facilities
|
09 Nov 2009 |
| D0902634-x0 |
Flange designs |
John Worden |
Vacuum
|
09 Nov 2009 |
| T0900401-v2 |
Analyzing Elastic Deformation of Test Masses in Ligo |
Richard Savage et al. |
Modelling
Calibration
Core Optics
|
09 Nov 2009 |
| D0901894-v1 |
TTFSS RF |
Daniel Sigg et al. |
Laser Systems
|
06 Nov 2009 |
| D0902577-v1 |
EtherCAT Adapter Quad BNC |
Daniel Sigg |
Data Acquisition System
|
06 Nov 2009 |
| D0902576-v1 |
EtherCAT Adapter Double DB-9M |
Daniel Sigg |
Data Acquisition System
|
06 Nov 2009 |
| E0900337-v1 |
Traveler for HLTS Prototype Parts - Batch 2 |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Nov 2009 |
| E0900338-v1 |
Traveler for HLTS Prototype Parts - Batch 3 |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Nov 2009 |
| E0900339-v1 |
Traveler for HLTS Prototype Parts - Batch 4 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900368-v1 |
Traveler for HLTS Prototype Parts - Batch 5 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900390-v1 |
Traveler for HLTS Prototype Parts - Batch 6 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900395-v1 |
Traveler for HLTS Prototype Parts - Batch 7 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| D0902605-v1 |
EtherCAT Panel RF Amp/PD Interface |
Daniel Sigg |
Data Acquisition System
|
05 Nov 2009 |
| D0902606-v1 |
EtherCAT Panel Auxiliary |
Daniel Sigg |
Data Acquisition System
|
05 Nov 2009 |
| D0901404-v1 |
Active Tip-Tilt Blade Spring Mounting Platform |
Michael Meyer |
Suspensions
Preliminary Design
|
05 Nov 2009 |
| G0900982-v1 |
Advanced LIGO |
Rana Adhikari |
Detector
|
05 Nov 2009 |
| D0902574-v1 |
EtherCAT Adapter DB-9F |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902573-v1 |
EtherCAT Adapter DB-9M |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902572-v1 |
EtherCAT Adapter DB-15F |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902571-v1 |
EtherCAT Adapter DB-15M |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902570-v1 |
EtherCAT Adapter DB-37F |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902569-v1 |
EtherCAT Adapter DB-37M |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902568-v1 |
EtherCAT Adapter DB-25F |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902567-v1 |
EtherCAT Adapter DB-25M |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0901834-v1 |
Photodiode Interface Power |
Daniel Sigg |
Sensing and Control
|
04 Nov 2009 |
| D0901893-v1 |
TTFSS HV |
Daniel Sigg et al. |
Laser Systems
|
04 Nov 2009 |
| D0902589-v1 |
EtherCAT Name Plate Squeezer |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902588-v1 |
EtherCAT Panel TTFSS |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902587-v1 |
EtherCAT Panel Delay Line |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902566-v1 |
EtherCAT Name Plate Example |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902565-v1 |
EtherCAT Panel Quad BNC |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902564-v1 |
EtherCAT Panel Double D-sub 9 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902562-v1 |
EtherCAT Panel D-sub 50 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902561-v1 |
EtherCAT Panel D-sub 9 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902560-v1 |
EtherCAT Panel D-sub 15 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902559-v1 |
EtherCAT Panel D-sub 37 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902558-v1 |
EtherCAT Panel D-sub 25 |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| D0902557-v1 |
EtherCAT Panel Blank |
Daniel Sigg |
Data Acquisition System
|
04 Nov 2009 |
| T0900558-v1 |
Reading out a Trillium 240 With an STS-2 Interface Chassis |
Benjamin Abbott |
Seismic Isolation
|
02 Nov 2009 |
| S0900299-v1 |
TCS Chassis Connector Board |
Christopher Guido |
Auxiliary Optics
|
31 Oct 2009 |
| D0902550-v1 |
TCS Chassis Connector Board |
Mohana Mageswaran |
Auxiliary Optics
|
31 Oct 2009 |
| P0900254-v1 |
Building blocks for future detectors: Silicon test masses and 1550 nm laser light |
Roman Schnabel et al. |
Detector
|
30 Oct 2009 |
| D0902538-x0 |
HSTS Dog Clamp |
Michael Meyer |
Final Design
Suspensions
|
29 Oct 2009 |
| D0902525-x0 |
HSTS Intermediate Mass Catcher Assembly |
Michael Meyer |
Suspensions
Final Design
|
29 Oct 2009 |
| E950062-v1 |
Cleaning of Beam Tube Can Modules |
Dennis Coyne |
Fabrication
Vacuum
|
27 Oct 2009 |
| E0900345-v1 |
DCN - Release of LASTI TCS Ring Heater Installation Retrofit |
Craig Conley |
Auxiliary Optics
|
27 Oct 2009 |
| D0901269-v2 |
ADV_LIGO_TCS_RING_HEATER_AND_SHIELD_ASSEM |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
27 Oct 2009 |
| D070420-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP TOP JAW, BS TOP MASS |
Joe ODell |
Suspensions
|
27 Oct 2009 |
| D070430-v2 |
ADVANCED LIGO, SUS, TOP PLATE, BS TOP MASS |
Joe ODell |
Suspensions
|
27 Oct 2009 |
| D0902489-x0 |
L4-C Pod Top Hat |
Sam Barnum |
Seismic Isolation
Final Design
|
27 Oct 2009 |
| D080107-v1 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH BACK BRIDGE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D080110-v1 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH MOUNT BRACKET, BEAMSPLITER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070418-v1 |
ADVANCED LIGO, SUS, BLADE TIP HEIGHT ADJUSTMENT #1, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070434-v1 |
ADVANCED LIGO, SUS, STABILITY LEG, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070423-v1 |
ADVANCED LIGO, SUS, PITCH ADJUSTER & MASS, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070422-v1 |
ADVANCED LIGO, SUS, BASE PLATE, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D080091-v1 |
ADVANCED LIGO, SUS, ROTATIONAL BUSH, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080089-v1 |
ADVANCED LIGO, SUS, BLADE TOP SPIN, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080087-v1 |
ADVANCED LIGO, SUS, BLADE WIRE CLAMP ASSEMBLY, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080086-v1 |
ADVANCED LIGO, SUS, ADJUSTER ARM, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080085-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP BASE, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080084-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP TOP, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080083-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP BOTTOM, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D0902351-v1 |
AdLIGO TCS Ring Heater Shield |
Craig Conley |
Suspensions
|
22 Oct 2009 |
| D0902450-v1 |
LASTI TCS Ring Heater Block |
Craig Conley |
Auxiliary Optics
|
22 Oct 2009 |
| D0902447-v1 |
LASTI TCS Ring Heater Installation Retrofit |
Craig Conley |
Auxiliary Optics
|
22 Oct 2009 |
| D0902448-v1 |
LASTI TCS Ring Heater Back Plate RH |
Craig Conley |
Auxiliary Optics
|
22 Oct 2009 |
| D0902449-v1 |
LASTI TCS Ring Heater Back Plate LH |
Craig Conley |
Auxiliary Optics
|
22 Oct 2009 |
| D080012-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS EQ STOP BRACKET |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080011-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, LS - US - BRACKET |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080010-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS TM SLIDING PAD |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080007-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS TOP HALF |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080505-v1 |
ADVANCED LIGO, SUS, BS TRIPLE SUS, BS US CROSS MEMBER, BS UPPER STRUCTURE, BOTTOM RING |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| E080508-v2 |
Advanced LIGO Metrology Large Aperture Interferometer |
GariLynn Billingsley |
Core Optics
Procurements
|
21 Oct 2009 |
| E0900302-x0 |
DCN - HLTS Magnet Placement Fixtures |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
21 Oct 2009 |
| D0902335-v1 |
Plunger/Gripper Assembly |
Derek Bridges |
Preliminary Design
Suspensions
|
21 Oct 2009 |
| G0900958-v1 |
Displacement Sensitivity of the LIGO Interferometers, S5 Performance - August 2007 |
John Zweizig |
Calibration
Sensing and Control
|
20 Oct 2009 |
| D0902410-x0 |
AdLIGO TCS Ring Heater Block |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| D0902409-x0 |
AdLIGO TCS Ring Heater Back Plate LH |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| D0902408-x0 |
AdLIGO TCS Ring Heater Back Plate RH |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| E0900069-v4 |
Advanced LIGO Signal Recycling Mirror 3 (SR3) Coating Specification |
Rand Dannenberg |
Core Optics
Final Design
|
19 Oct 2009 |
| S0900295-v1 |
STS-2-T240 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
19 Oct 2009 |
| D0902440-x0 |
AdLIGO AOS OpLev & PhotCal Layout, LHO LVEA |
Craig Conley |
Auxiliary Optics
|
16 Oct 2009 |
| D0902438-x0 |
AdLIGO AOS OpLev & PhotCal Equipment Layout, LHO Y-End Station |
Craig Conley |
Auxiliary Optics
|
16 Oct 2009 |
| D0901833-v2 |
Photodiode Interface |
Daniel Sigg |
Sensing and Control
|
16 Oct 2009 |
| D0901835-v2 |
Photodiode Interface Front Panel |
Daniel Sigg |
Sensing and Control
|
16 Oct 2009 |
| E0900071-v4 |
Advanced LIGO Power Recycling Mirror 3 (PR3) Coating Specification |
Rand Dannenberg |
Final Design
Core Optics
|
15 Oct 2009 |
| E0900072-v3 |
Advanced LIGO Folding Mirror (FM) Coating Specification |
Rand Dannenberg |
Core Optics
Final Design
|
15 Oct 2009 |
| S0900293-v1 |
TCS ISS Servo and Interface Board |
Christopher Guido |
Auxiliary Optics
|
15 Oct 2009 |
| D080746-v1 |
RF Distribution Amplifier: Mounting Plate |
Daniel Sigg |
Sensing and Control
|
14 Oct 2009 |
| S0900238-v1 |
TCS AA Interface Board |
Christopher Guido |
Auxiliary Optics
|
13 Oct 2009 |
| P0900127-x0 |
H1 Squeezer Status |
Daniel Sigg et al. |
Sensing and Control
|
13 Oct 2009 |
| D0901296-v2 |
Blade Characterization Stand - Wire Clamp Bolt |
Michael Meyer |
Suspensions
Final Design
|
13 Oct 2009 |
| D990160-v1 |
Brass Plunger |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| D990161-v1 |
Pencil Mechanism Holder |
Janeen Romie |
Preliminary Design
Suspensions
|
12 Oct 2009 |
| D990148-v1 |
Fluorel Tip, 1/4-20 |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| D970562-v1 |
Beamsplitter Chamfer Stop |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| D080711-v1 |
RF Amplifier Front Panel |
Daniel Sigg |
Sensing and Control
|
12 Oct 2009 |
| E0900344-v1 |
Drawing Tree for Assembly D0901269-v1 |
Craig Conley |
Suspensions
|
11 Oct 2009 |
| G0900577-v3 |
Arm Length Stabilization for Advanced Gravitational Wave Detectors |
Daniel Shaddock et al. |
Conceptual Design
Sensing and Control
|
11 Oct 2009 |
| P0900124-v1 |
Quantum noise of a Michelson-Sagnac interferometer with translucent mechanical oscillator |
Stefan Gossler et al. |
Detector
Basic R&D
|
09 Oct 2009 |
| T0900488-v1 |
TransMon_SUS_Assembly_Naming_Conventions |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
08 Oct 2009 |
| D0902369-x0 |
TransMon_SUS_Assembly_Naming_Conventions |
Ken Mailand |
Auxiliary Optics
Final Design
|
08 Oct 2009 |
| D080538-v1 |
ADVANCED LIGO, SUS, THIS, FM ENVELOPE DESIGN |
Joe ODell |
Suspensions
|
08 Oct 2009 |
| T0900391-v1 |
Pulling/Welding Procedure (LASTI, September 2009) |
Mark Barton |
Suspensions
Subsystem Test
|
08 Oct 2009 |
| D080537-v1 |
ADVANCED LIGO, SUS, THIS, BS ENVELOPE |
Joe ODell |
Suspensions
|
07 Oct 2009 |
| D0902353-x0 |
AdLIGO SUS TCP Ring Heater Shield Bracket LH |
Craig Conley |
Suspensions
|
07 Oct 2009 |
| D0902352-x0 |
AdLIGO SUS TCP Ring Heater Shield Bracket RH |
Craig Conley |
Suspensions
|
07 Oct 2009 |
| E0900331-v1 |
DCN Updated R3 Coating Specification |
Rand Dannenberg |
Core Optics
Fabrication
|
06 Oct 2009 |
| D0902347-x0 |
Stage0-1 Horizontal Sensor Target Mount |
Sam Barnum |
Preliminary Design
Seismic Isolation
|
06 Oct 2009 |
| D0902344-x0 |
AdvLIGO HSTS Metal Test Mass Assembly (D070092 Optic) |
Michael Meyer |
Final Design
Suspensions
|
06 Oct 2009 |
| D0902343-x0 |
AdvLIGO HSTS Metal Test Mass (D070092 Optic) |
Michael Meyer |
Final Design
Suspensions
|
06 Oct 2009 |
| T080221-v1 |
BS/FM Component List |
Joe ODell |
Suspensions
|
05 Oct 2009 |
| D080710-v2 |
RF Distribution Amplifier |
Daniel Sigg |
Sensing and Control
|
05 Oct 2009 |
| D080712-v2 |
RF Amplifier Rear Panel |
Daniel Sigg |
Sensing and Control
|
05 Oct 2009 |
| D0902314-x0 |
OSEM Magnet and Flag Assembly (5mm thick magnets) |
Michael Meyer |
Suspensions
Final Design
|
02 Oct 2009 |
| D0902313-x0 |
HSTS Upper Mass Magnet Spacer |
Michael Meyer |
Final Design
Suspensions
|
02 Oct 2009 |
| D0902311-x0 |
HSTS Weldment Gusset |
Michael Meyer |
Suspensions
Final Design
|
02 Oct 2009 |
| T070005-v1 |
Fibre Pulling and Welding Machine Electronics |
Mark Barton |
Suspensions
|
01 Oct 2009 |
| D0902290-x0 |
HSTS Structural Weldment Gusset (2.4 x 3 x 0.375) |
Michael Meyer |
Final Design
Suspensions
|
01 Oct 2009 |
| D0902160-v1 |
OMC Tip-Tilt Shutter Box Adaptor Cable |
David Kinzel |
Sensing and Control
|
30 Sep 2009 |
| T0900458-v1 |
Multiply Resonant EOM for the LIGO 40-meter Interferometer |
Stephanie Erickson et al. |
Input Optics
Laser Systems
Basic R&D
|
29 Sep 2009 |
| D080351-v2 |
TCS_ISS Servo and Interface Board |
Mohana Mageswaran |
Final Design
Auxiliary Optics
|
29 Sep 2009 |
| T0900079-v1 |
AdvLIGO OMC Suspension Electronics Requirements |
Jay Heefner |
Requirements
Suspensions
|
28 Sep 2009 |
| D0902181-x0 |
Foil Holder Top Plate |
Michael Meyer |
Final Design
Observatory Facilities
|
24 Sep 2009 |
| D0902169-x0 |
ADLIGO_ETM_TELE_MASS_MOMENTS |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
23 Sep 2009 |
| D0902132-x0 |
ADLIGO_ETM_TELE_DIMENSION_SUS_DRAWING |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
22 Sep 2009 |
| G0900182-x0 |
Thermal Compensation Status in Enhanced LIGO |
Phil Willems |
Auxiliary Optics
|
16 Mar 2009 |
| S0900183-v1 |
Pier Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
22 Sep 2009 |
| S0900184-v1 |
Pier Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
22 Sep 2009 |
| D0901288-v1 |
SUS_OPTICAL_TEST_BENCH_I_BEAM |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
24 Jun 2009 |
| T0900128-v3 |
Scattered Light Loss from LIGO Arm Cavity Mirrors |
William Kells |
Basic R&D
Core Optics
|
21 Sep 2009 |
| D0902098-x0 |
ADLIGO_ETM_TELE_VERTICA;L_BRACE_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902097-x0 |
ADLIGO_ETM_TELE_END_BRACE_ |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
16 Sep 2009 |
| D0902096-x0 |
ADLIGO_ETM_TELE_RAY_SECONDARY_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902095-x0 |
ADLIGO_ETM_TELE_RAY_INCOMING |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902094-x0 |
ADLIGO_ETM_TELE_RAY_CONE_F2_SEC_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902093-x0 |
ADLIGO_ETM_TELE_RAY_CONE_F1_F2_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902092-x0 |
ADLIGO_ETM_TELE_RAY_CONE_PRIM_F1_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902091-x0 |
ADLIGO_ETM_TELE_RAY_CONE_NON_FOLD |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
16 Sep 2009 |
| D0902083-x0 |
ADLIGO_ETM_TELE_VERTICAL_SUS_ASSEM |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
16 Sep 2009 |
| D0902074-x0 |
ETM_TELE_1INCH_PERISCOPE_6825-E0W.sldprt |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902073-x0 |
ETM_TELE_1INCH_MOUNT_CLAMP_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
15 Sep 2009 |
| D0900657-v3 |
AdvLIGO AOS Optical Lever Pier Weldment |
Craig Conley |
Auxiliary Optics
|
15 Sep 2009 |
| D0902072-x0 |
ETM_TELE_1INCH_MOUNT_6628-E0W |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902071-x0 |
ADLIGO_ETM_TELE_OPTICAL_BENCH_PL_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
15 Sep 2009 |
| D0902065-x0 |
ADLIGO_ETM_TELE_BEAM_END_PL |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902070-x0 |
Standoff Side Bracket, Magnet Placement Fixture, Test Mass, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
15 Sep 2009 |
| D0902067-x0 |
Pressure Bracket, Magnet Placement Fixture, Test Mass, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
15 Sep 2009 |
| D0902063-x0 |
ADLIGO_ETM_TELE_OPP_BEAM_END_PL |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902061-x0 |
ADLIGO_ETM_TELE_SPREADER_TUBE. |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902059-x0 |
ADLIGO ETM TELE BENCH LAYOUT |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
15 Sep 2009 |
| D0902058-x0 |
ETM_TELE_OPTIC_LAYOUT |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
15 Sep 2009 |
| D0902055-x0 |
ADLIGO_ETM_TELE_W-BENCH_ASSEM_ |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
15 Sep 2009 |
| T070247-v1 |
AdvLIGO Interferometer Sensing and Control Conceptual Design |
Peter Fritschel |
Sensing and Control
Conceptual Design
|
14 Sep 2009 |
| E070087-v1 |
COMPONENT SPECIFICATION - ALIGO MODE CLEANER MIRROR #3 SUBSTRATE, COATED |
Rodica Martin et al. |
Preliminary Design
Input Optics
|
14 Sep 2009 |
| E070080-v1 |
COMPONENT SPECIFICATION - SUBSTRATE, ALIGO MODE CLEANER MIRROR #3 |
Rodica Martin et al. |
Preliminary Design
Input Optics
|
14 Sep 2009 |
| E0900243-x0 |
DCN - AOSEM Alignment and Mounting Brackets |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
11 Sep 2009 |
| E0900277-x0 |
DCN - Updated HLTS Test Mass Parts and Assembly, Lower Loop Wire Parts, Jig, and Assembly, and Intermediate Mass Assembly |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
11 Sep 2009 |
| E080134-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO PRE-MODE MATCHING TELESCOPE MIRROR #2 |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
11 Sep 2009 |
| E070073-v1 |
COMPONENT SPECIFICATION - MIRROR BLANK MATERIAL, ALIGO INPUT MODE CLEANER MIRROR #3 |
Rodica Martin et al. |
Input Optics
Preliminary Design
|
11 Sep 2009 |
| D0902014-x0 |
HSTS Intermediate Wire Clamp (Lower) Angled |
Michael Meyer |
Final Design
Suspensions
|
10 Sep 2009 |
| D0901836-v1 |
Photodiode Interface Rear Panel |
Daniel Sigg |
Sensing and Control
|
06 Sep 2009 |
| D0901897-v1 |
TTFSS Assembly |
Daniel Sigg et al. |
Laser Systems
|
05 Sep 2009 |
| D0901896-v1 |
TTFSS Power |
Daniel Sigg et al. |
Laser Systems
|
05 Sep 2009 |
| D0901895-v1 |
TTFSS Slow |
Daniel Sigg et al. |
Laser Systems
|
05 Sep 2009 |
| D0901544-v1 |
Cable Clamp Liner, 40-Meter Cable Clamp |
Derek Bridges |
Preliminary Design
Suspensions
|
04 Sep 2009 |
| D0901976-x0 |
ADLIGO_ETM_VERTICAL_TELE_MASS_PLACE_HOLDER_ASSEMBLY_ |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
04 Sep 2009 |
| D010120-v1 |
40-Meter Cable Clamp |
Derek Bridges |
Preliminary Design
Suspensions
|
04 Sep 2009 |
| D0901547-v1 |
Top Plate, 40-Meter Cable Clamp |
Derek Bridges |
Suspensions
Preliminary Design
|
04 Sep 2009 |
| D0901545-v1 |
Base Plate, 40-Meter Cable Clamp |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Sep 2009 |
| E080356-v1 |
HAM Crossbeam Redesign for Advanced LIGO: Technical Justification |
Andy Stein |
Seismic Isolation
Modelling
|
03 Sep 2009 |
| E080166-v1 |
HAM Crossbeam Redesign for Advanced LIGO: FEA Study |
Andy Stein |
Conceptual Design
Seismic Isolation
|
03 Sep 2009 |
| T0900409-v1 |
Underground Seismic Studies for 3rd Generation Gravitational Wave Interferometric Detectors at the Former Homestake Mine in Lead, South Dakota |
Riccardo DeSalvo et al. |
Activity
Seismic Isolation
|
02 Sep 2009 |
| D0901919-x0 |
XYCOMM to Binary I/O Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901916-x0 |
Pentek to DAC Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901915-x0 |
Pentek to DAC Interface Board |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901913-x0 |
Pentek to ICS110B Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901912-x0 |
Pentek to ICS110B Interface Board |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901909-x0 |
Pentek to ADC Interface Board |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| D0901910-x0 |
Pentek to ADC Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
02 Sep 2009 |
| E0900266-x0 |
DCN - HAM Crossbeam Miscellaneous |
Andy Stein |
Final Design
Change Control
Seismic Isolation
|
02 Sep 2009 |
| D0901907-v1 |
Trillium 240 In-Air Cable Diagram |
Benjamin Abbott |
Seismic Isolation
|
01 Sep 2009 |
| D0901340-v3 |
Trillium 240 OBS, LIGO Version |
Sam Barnum |
Seismic Isolation
Final Design
|
01 Sep 2009 |
| D0901853-v1 |
Power Module Bracket |
Daniel Sigg |
Sensing and Control
|
28 Aug 2009 |
| E0900261-x0 |
DCN - HAM Crossbeam Connector Weldment (D080462) |
Andy Stein |
Final Design
Seismic Isolation
Change Control
|
28 Aug 2009 |
| D0901882-x0 |
OMC SUS Riser Block for PD replacement |
Michael Meyer |
Suspensions
Preliminary Design
|
27 Aug 2009 |
| E0900258-x0 |
DCN - HAM Crossbeam Weldment (D080456) |
Andy Stein |
Final Design
Change Control
Seismic Isolation
|
27 Aug 2009 |
| S0900165-v1 |
Anti-Alias Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
27 Aug 2009 |
| D0901881-x0 |
Beam Dump Clamp for Active Tip-Tilt |
Michael Meyer |
Sensing and Control
Preliminary Design
|
26 Aug 2009 |
| T0900164-v1 |
UK PUM Driver Pre-Production Prototype Test Plan |
Jay Heefner |
Suspensions
System Test
|
26 Aug 2009 |
| G0900674-v1 |
Gravity Waves: Next Window on the Universe |
Thomas Nash et al. |
Detector
Continuous Wave
Stochastic
Compact Binaries
Astrophysics / Multi-messenger
Operations
GW Bursts
|
25 Aug 2009 |
| D0901576-v1 |
Foil Holder Assembly |
Michael Meyer |
Preliminary Design
Observatory Facilities
|
21 Aug 2009 |
| D0901572-v1 |
Foil Holder Base Plate |
Michael Meyer |
Observatory Facilities
Preliminary Design
|
21 Aug 2009 |
| D0901573-v1 |
Foil Holder Vertical Support |
Michael Meyer |
Preliminary Design
Observatory Facilities
|
21 Aug 2009 |
| D0901574-v1 |
Foil Holder Horizontal Support |
Michael Meyer |
Observatory Facilities
Preliminary Design
|
21 Aug 2009 |
| D0901575-v1 |
Foil Holder Rod |
Michael Meyer |
Preliminary Design
Observatory Facilities
|
21 Aug 2009 |
| D0901785-v1 |
Foil Holder - Roll Stop |
Michael Meyer |
Preliminary Design
Observatory Facilities
|
21 Aug 2009 |
| D0901831-x0 |
GS-13 Stabilizer Plate Spacer. |
Sam Barnum |
Preliminary Design
Seismic Isolation
|
19 Aug 2009 |
| D0901827-x0 |
BSC_Weld_Nut-Custom .25-20 Thread |
Sam Barnum |
Preliminary Design
Seismic Isolation
|
19 Aug 2009 |
| D081022-v1 |
Tiltmeter, Assembly Capacitive Wedge |
Gianni Gennaro |
Detector
|
17 Aug 2009 |
| D081021-v1 |
Tiltmeter, Assembly LVDT Readout |
Gianni Gennaro |
Detector
|
17 Aug 2009 |
| D081020-v1 |
Tiltmeter, Ass. LVDT + Interferometer |
Gianni Gennaro |
Detector
|
17 Aug 2009 |
| D081019-v1 |
Tiltmeter, Ass. Flexure Capacitive |
Gianni Gennaro |
Detector
|
17 Aug 2009 |
| D060235-v1 |
ADV LIGO, SUS, QUAD N-PTYPE TOP STAGE, TOP STAGE BLADES |
Joe ODell |
Suspensions
|
17 Aug 2009 |
| D0901251-v1 |
Blade Characterization Stand Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901249-v1 |
Blade Characterization Stand - Actuator Assembly |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901250-v1 |
Blade Characterization Stand - Ball Slide Assembly |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901298-v1 |
Blade Characterization Stand - Wire Clamp Bolt Assembly |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901297-v1 |
Blade Characterization Stand - Wire Clamp Bolt, Outside |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901293-v1 |
Blade Characterization Stand - Track Top Adapter |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901246-v1 |
Blade Characterization Stand - Actuator Mount |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901245-v1 |
Blade Characterization Stand - Track Mount |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901243-v1 |
Blade Characterization Stand - Baseplate |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901242-v1 |
Blade Characterization Stand - Adapter |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| E0900239-x0 |
DCN - HLTS Updated Drawings (Upper Wire and Upper Blade Bake Fixture) |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
14 Aug 2009 |
| D047792-v2 |
HAM, GS-13, Foot, Jam nut |
Sam Barnum |
Seismic Isolation
Final Design
|
13 Aug 2009 |
| D047791-v2 |
HAM, GS-13, Foot |
Sam Barnum |
Final Design
Seismic Isolation
|
13 Aug 2009 |
| D047811-v3 |
HAM, GS-13, Crossbar |
Sam Barnum |
Seismic Isolation
Final Design
|
13 Aug 2009 |
| T0900327-v1 |
Review Report Interferometer Sensing and Control Preliminary Design |
Robert Schofield et al. |
Preliminary Design
Sensing and Control
|
12 Aug 2009 |
| S0900106-v1 |
STS-2 Interface Chassis |
Samuel Abbott |
Seismic Isolation
|
12 Aug 2009 |
| E0900233-v1 |
DCN for Radius of curvature change for SPR3, PR3, F-PR3 |
GariLynn Billingsley et al. |
Fabrication
Core Optics
|
11 Aug 2009 |
| E0900205-x0 |
DCN - HLTS Lower Loop Wire Jig |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
10 Aug 2009 |
| G0900670-v2 |
Stray Light Control in Advanced LIGO |
Michael Smith |
Auxiliary Optics
|
07 Aug 2009 |
| E070141-v1 |
DCN for ELi Septum Window Coating specification |
GariLynn Billingsley |
Vacuum
Fabrication
|
07 Aug 2009 |
| D0900141-v2 |
RF Source Mounting Plate |
Daniel Sigg |
Sensing and Control
|
06 Aug 2009 |
| D0901447-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_SHUTTER |
Ken Mailand |
Final Design
Auxiliary Optics
|
06 Aug 2009 |
| D047864-v1 |
Angle Bracket, Long, Bay Bulkhead, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 Aug 2009 |
| D047860-v1 |
Gusset, Stiffener, Baseplate, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 Aug 2009 |
| D0901417-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_ASSEM. |
Ken Mailand |
Final Design
Auxiliary Optics
|
05 Aug 2009 |
| D0901424-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_OPP_APERTURE |
Ken Mailand |
Final Design
Auxiliary Optics
|
05 Aug 2009 |
| E0900232-x0 |
DCN - HLTS Test Mass and Related Parts |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
05 Aug 2009 |
| D0901568-x0 |
ADLIGO_ETM_TELE_TUBE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
05 Aug 2009 |
| D0901567-x0 |
ADLIGO_ETM_TELE_FOLD_END |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
05 Aug 2009 |
| D0901566-x0 |
ADLIGO_ETM_TELE_PRIMARY_END |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
05 Aug 2009 |
| E080517-v3 |
E080517 F-PR3 Polishing Specification |
Margot Hennig |
Final Design
Core Optics
|
05 Aug 2009 |
| E080518-v3 |
E080518_SR3_Spec |
Margot Hennig |
Core Optics
Final Design
|
05 Aug 2009 |
| D0901563-x0 |
ADLIGO_ETM_TELE_F3 |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
04 Aug 2009 |
| D0901562-x0 |
ADLIGO_ETM_TELE_F1 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901561-x0 |
ADLIGO_ETM_TELE_F2 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901558-x0 |
ADLIGO_ETM_TELE_ASSEM. |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901557-x0 |
ADLIGO_ETM_TELE_PRIMARY |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901556-x0 |
ADLIGO_ETM_TELE_TABLE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
04 Aug 2009 |
| D0901432-v1 |
ADLIGO TCS_LASER_ENCLOSURE_LASER_MIRROR_COVER |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901484-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_SLIDE |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901482-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_HANDLE |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901453-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_W1008-Z-AR_WINDOW |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901451-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_DUMP_MIRROR |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901450-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_DUMP_CAP |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901449-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_DUMP_TUBE |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901448-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_BM_DMP_ASEM |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901437-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_SHUTTER_LOCK |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901434-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_LASER_WINDOW_RING |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901431-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_LASER_MOUNT_PL |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901430-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_SPACER |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901429-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_COVER_ANGLE |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901428-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_APERTURE_PL |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901427-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_BULKHEAD_PL |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901426-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_WINDOW |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901425-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_MIRROR_ROD |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901423-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_COVER_TOP |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901422-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_COVER_SIDE |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901421-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_KEY_SHAFT |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| D0901420-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_BASE_PLATE |
Ken Mailand |
Final Design
Auxiliary Optics
|
04 Aug 2009 |
| D0901418-v1 |
ADLIGO_TCS_LASER_ENCLOSURE_MIRROR_MT |
Ken Mailand |
Auxiliary Optics
Final Design
|
04 Aug 2009 |
| T0900375-v1 |
AR absorption measurement on Contamination Cavity Sample |
GariLynn Billingsley et al. |
Core Optics
Basic R&D
|
04 Aug 2009 |
| E0900129-x0 |
DCN - Rounded SHCS |
Derek Bridges |
Change Control
System Engineering
|
03 Aug 2009 |
| E0900221-x0 |
DCN - HLTS Coil Holder (Tablecloth) Assembly and Parts |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
03 Aug 2009 |
| E0900204-x0 |
DCN - HLTS Intermediate Wire Jig |
Derek Bridges |
Change Control
Suspensions
Preliminary Design
|
03 Aug 2009 |
| D080665-v1 |
Timing Interface 1 PPS Locking |
Daniel Sigg |
Sensing and Control
|
31 Jul 2009 |
| D080114-v1 |
HAM ISI Wiring System |
Benjamin Abbott |
Seismic Isolation
|
31 Jul 2009 |
| T0900366-x0 |
STS-2 Distribution Chassis Test Procedure |
Benjamin Abbott |
Seismic Isolation
|
30 Jul 2009 |
| D0901409-v1 |
Tip-Tilt Blade Spring Viton Damper Mount |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jul 2009 |
| D0901403-v1 |
Passive Tip-Tilt Blade Spring Mounting Platform |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jul 2009 |
| D0901166-v1 |
Tip-Tilt Blade Wire Clamp |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jul 2009 |
| D0901165-v1 |
Tip-Tilt Blade Wire Clamp Block |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jul 2009 |
| D0901164-v1 |
Tip-Tilt Blade Spring |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jul 2009 |
| D0901452-x0 |
ADLIGO_TCS_LASER_ENCLOSURE_KEY_SHFT_KNOB |
Ken Mailand |
Final Design
Auxiliary Optics
|
29 Jul 2009 |
| G0900660-v1 |
BSC ISI Electronics Document |
Benjamin Abbott |
Seismic Isolation
|
29 Jul 2009 |
| T0900346-v2 |
STS-2 Interface Chassis Test Procedure |
Benjamin Abbott |
Seismic Isolation
|
29 Jul 2009 |
| D0900997-v1 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
29 Jul 2009 |
| G0900664-v2 |
The emerging global network of gravitational wave detectors: LIGO and Virgo open a new window to the universe |
David Reitze |
Detector
Data Analysis
|
29 Jul 2009 |
| D0901507-x0 |
Tip-Tilt Viton Damper Mount (Extended) |
Michael Meyer |
Preliminary Design
Suspensions
|
29 Jul 2009 |
| D0901505-v1 |
RF Summing Box Front Panel |
Daniel Sigg |
Laser Systems
|
28 Jul 2009 |
| E0900189-x0 |
DCN - HLTS Test Mass Assembly Parts (and HLTS Intermediate Mass Main Section) |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
28 Jul 2009 |
| D0901498-x0 |
AdLIGO AOS Optical Lever Pier Weldment |
Craig Conley |
Auxiliary Optics
|
28 Jul 2009 |
| D0901497-x0 |
AdvLIGO AOS OpLev Pier Table |
Craig Conley |
Auxiliary Optics
|
28 Jul 2009 |
| D0901496-x0 |
AdLIGO AOS OpLev Center Tool |
Craig Conley |
Auxiliary Optics
|
27 Jul 2009 |
| E0900176-x0 |
DCN - HLTS Assembly Drawings |
Derek Bridges |
Change Control
Suspensions
Preliminary Design
|
27 Jul 2009 |
| E0900220-x0 |
DCN - OSEM Magnet and Flag Assembly |
Derek Bridges |
Suspensions
|
27 Jul 2009 |
| D0901472-v1 |
AdLIGO AOS OpLev Release Piston |
Craig Conley |
Auxiliary Optics
|
27 Jul 2009 |
| T0900276-v4 |
LSC Instrument Science White Paper 2009 |
David Shoemaker |
Basic R&D
Detector
Collaboration
|
25 Jul 2009 |
| P0900076-v1 |
Astrophysics issues and low frequency mechanical noise for third generation gravitational waves detectors |
Arianna Di Cintio |
Basic R&D
Seismic Isolation
|
25 Jul 2009 |
| D0901480-v1 |
AdLIGO AOS OpLev Load Cylinder |
Craig Conley |
Auxiliary Optics
|
25 Jul 2009 |
| E0900198-x0 |
DCN - HLTS Upper Mass Parts |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
24 Jul 2009 |
| D0901487-x0 |
AdLIGO AOS OpLev Pull Rod |
Craig Conley |
Auxiliary Optics
|
23 Jul 2009 |
| D0901486-x0 |
AdLIGO AOS OpLev Load Spacer |
Craig Conley |
Auxiliary Optics
|
23 Jul 2009 |
| D0901483-x0 |
Hanging STS-2 or Trillium Vacuum Pod |
Stephany Foley |
Seismic Isolation
Final Design
|
23 Jul 2009 |
| D0900912-x0 |
AdLIGO AOS OpLev Assy Prototype |
Craig Conley |
Auxiliary Optics
|
22 Jul 2009 |
| D0901479-x0 |
AdLIGO AOS OpLev Beam Steering Mechanism |
Craig Conley |
Auxiliary Optics
|
22 Jul 2009 |
| D0901478-x0 |
AdLIGO AOS OpLev Telescope Adjustment Platform |
Craig Conley |
Auxiliary Optics
|
22 Jul 2009 |
| D0901474-x0 |
AdLIGO AOS OpLev Pull Rod Retainer |
Craig Conley |
Auxiliary Optics
|
22 Jul 2009 |
| D0901471-x0 |
AdLIGO AOS OpLev Telescope Motion Plate |
Craig Conley |
Auxiliary Optics
|
22 Jul 2009 |
| E0900213-x0 |
DCN - Magnet Holder (OMC SUS, HLTS) |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
22 Jul 2009 |
| D0901338-v1 |
8-Ch Valve Driver Manufacturing Drawings |
Benjamin Abbott |
Seismic Isolation
|
21 Jul 2009 |
| T0900317-v1 |
8 Ch Valve Driver Manufacturing Documents |
Benjamin Abbott |
Seismic Isolation
|
21 Jul 2009 |
| D020608-v1 |
X-Direction Offset, T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
21 Jul 2009 |
| D0901357-v1 |
AdLIGO AOS OpLev Piston Sealing Screw |
Craig Conley |
Auxiliary Optics
|
20 Jul 2009 |
| D0901438-v1 |
AdLIGO AOS OpLev Center Tool |
Craig Conley |
Auxiliary Optics
|
20 Jul 2009 |
| D0901367-v1 |
AdLIGO AOS OpLev Release Chamber Cover |
Craig Conley |
Auxiliary Optics
|
20 Jul 2009 |
| D0901369-v1 |
AdLIGO AOS OpLev Azimuth Adjustment Bracket |
Craig Conley |
Auxiliary Optics
|
20 Jul 2009 |
| E0900193-x0 |
DCN - HLTS Lower Loop Wire Parts |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
20 Jul 2009 |
| G0900692-v1 |
H1 Squeezer Update |
Daniel Sigg |
Basic R&D
Sensing and Control
|
19 Jul 2009 |
| E960159-v1 |
Specification for Viton Vacuum Bakeout, LIGO Vacuum Equipment - Hanford and Livingston |
Dennis Coyne |
Fabrication
Vacuum
|
17 Jul 2009 |
| E0900207-v1 |
Traveler for HLTS Structural Weldment (D070442) Prototype |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Jul 2009 |
| D0901266-v1 |
AdvLIGO COC FM BS Optic Container Cover, Top, |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901400-v1 |
Adv LIGO COC R Optic Container, Plastic, Insert, Base, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901352-v1 |
Adv LIGO COC R Optic Container, Cover, Lid, Alum Box Rnd |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901354-v1 |
Adv LIGO COC R Optic Container, Base, Lid, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901353-v1 |
Adv LIGO COC R Optic Container, Cover, Ring, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Installation
|
17 Jul 2009 |
| D0901355-v1 |
Adv LIGO COC R Optic Container, Base, Ring, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901356-v1 |
Adv LIGO COC R Optic Container, Plate, Fitting, Mirror Wedge, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901399-v1 |
AdvLIGO COC CP Optic Container Plastic, Insert, Base, Alum Box Rnd, CP |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901330-v1 |
AdvLIGO COC CP Optic Container Base, Lid, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901331-v1 |
AdvLIGO COC CP Optic Container Base, Ring, Alum Box Rnd, CP |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901329-v1 |
AdvLIGO COC CP Optic Container Plate, Fitting, Mirror Wedge, Alum Box Rnd, CP |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901328-v1 |
AdvLIGO COC CP Optic Container Cover, Ring, Alum Box Rnd, CP |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901327-v1 |
AdvLIGO COC CP Optic Container Cover, Lid, Alum Box Rnd |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901270-v1 |
AdvLIGO COC FM BS Optic Container Plastic, Insert, Base |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901268-v1 |
AdvLIGO COC FM BS Optic Container Plate, Fitting, Mirror Wedge |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901267-v1 |
AdvLIGO COC FM BS Optic Container Base, Bottom, |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901212-v1 |
AdvLIGO COC ETM Optic Container Base, Lid, |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901211-v1 |
AdvLIGO COC ETM Optic Container Base, Ring, |
Jose Eduardo Chavez |
System Engineering
Fabrication
|
17 Jul 2009 |
| D0901210-v1 |
AdvLIGO COC ETM Optic Container Cover, Lid, |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901317-v1 |
AdvLIGO COC ETM Optic Container Plastic, Insert, Base, Alum Box Rnd |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901316-v1 |
AdvLIGO COC ETM Optic Container Block, Spring Loaded, Adjustable/Alignment Stop Mirror |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901398-v1 |
AdvLIGO COC ETM Optic Container Plate, Adjustable/Alignment Stop Mirror, |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901209-v1 |
AdvLIGO COC ETM Optic Container Cover, Ring |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901208-v1 |
AdvLIGO COC ETM Optic Container Plate, Fitting, Mirror Wedge |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901064-v1 |
AdvLIGO COC Optic Container Handle, Cover Lid |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901063-v1 |
AdvLIGO COC Optic Container Plate, Retaining Screw, Fitting Plate, Mirror Wedge |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901311-v1 |
AdLIGO COC Optics Container Custom Viton Bellow for wedge plate adjuster |
Jose Eduardo Chavez |
Core Optics
|
17 Jul 2009 |
| D0901321-v1 |
AdvLIGO COC Optic Container Rod, Guide, End Threaded, 1/4-20 |
Jose Eduardo Chavez |
Final Design
System Engineering
|
17 Jul 2009 |
| D0901320-v1 |
AdvLIGO COC Optic Container Screw Retaining End Slot |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901322-v1 |
AdvLIGO COC Optic Container Block Cover Removal |
Jose Eduardo Chavez |
System Engineering
Final Design
|
17 Jul 2009 |
| D0901366-v1 |
AdLIGO AOS OpLev Release Piston |
Craig Conley |
Auxiliary Optics
|
16 Jul 2009 |
| T0900089-v1 |
Replacement Flexures for the GS-13 Seismometer |
Daniel Clark et al. |
Seismic Isolation
Basic R&D
|
16 Jul 2009 |
| D080055-v1 |
ADLIGO ETM MIRROR BLANK |
GariLynn Billingsley et al. |
Core Optics
Final Design
|
16 Jul 2009 |
| D0901380-v1 |
AdLIGO AOS OpLev Telescope Slide Plate |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901379-v1 |
AdLIGO AOS OpLev Telescope Clamp, 2.323 in D |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901378-v1 |
AdLIGO AOS OpLev Telescope Clamp, 2 in D |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901377-v1 |
AdLIGO AOS OpLev Telescope Motion Plate |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901375-v1 |
AdLIGO AOS OpLev Telescope Wedge, 7 degree |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901373-v1 |
AdLIGO AOS OpLev Telescope Slide Clamp |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901372-v1 |
AdLIGO AOS OpLev Load Adjustment Screw |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901371-v1 |
AdLIGO AOS OpLev Steering Ground Ring |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901370-v1 |
AdLIGO AOS OpLev Mechanism Clamp Ring |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901368-v1 |
AdLIGO AOS OpLev Retaining Collar |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901360-v1 |
AdLIGO AOS OpLev Load Wire, 5.98 in |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901359-v1 |
AdLIGO AOS OpLev Load Wire, 5.93 in |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D0901358-v1 |
AdLIGO AOS OpLev Load Wire, 5.74 in |
Craig Conley |
Auxiliary Optics
|
15 Jul 2009 |
| D080252-v4 |
OMC Tip-Tilt Shutter Board Drawing |
Rich Abbott |
Sensing and Control
|
15 Jul 2009 |
| P0900063-v1 |
Probing macroscopic quantum state with a sub-Heisenberg accuracy |
Henning Rehbein et al. |
Detector
|
15 Jul 2009 |
| D080039-v1 |
ADLIGO ITM MIRROR BLANK |
GariLynn Billingsley et al. |
Core Optics
Final Design
|
15 Jul 2009 |
| D0901411-x0 |
Tip-Tilt Viton Holder |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Jul 2009 |
| D070213-v1 |
ADVANCED LIGO, SUS OMC, Lower Clamp Wire Clamp Assembly, Wire Clamp For Optical Bench |
Calum Torrie |
Suspensions
|
14 Jul 2009 |
| C962778-v1 |
Report of Materials Analysis: Analysis of Three Liquid Samples for Nonvolatile Residue Content. Analysis of Nonvolatile Portion of "Mirachem from Scrubber" for Comparison to the Residues |
Dennis Coyne |
Fabrication
Vacuum
|
09 Jul 2009 |
| D0901041-v1 |
HAM to BSC Test/Assembly Stand Adapter |
Sam Barnum |
Seismic Isolation
Final Design
|
09 Jul 2009 |
| E960046-v1 |
Specification for Cleaning Procedure for LIGO Vacuum Equipment (PSI) |
Dennis Coyne |
Vacuum
Fabrication
|
09 Jul 2009 |
| T0900334-v2 |
Response to Stray Light Control PDD Comments |
Michael Smith |
Auxiliary Optics
Preliminary Design
|
09 Jul 2009 |
| G0900558-v1 |
Optical Design of the Advanced LIGO Detectors with Stable Recycling Cavities |
David Tanner et al. |
Laser Systems
Core Optics
Meeting
Input Optics
|
09 Jul 2009 |
| E0900191-x0 |
Drawing Tree - AdLIGO AOS OpLev Assy Prototype |
Craig Conley |
Auxiliary Optics
|
08 Jul 2009 |
| P0900087-v1 |
Realization of a monolithic high-reflectivity cavity mirror from a single silicon crystal |
Daniel Friedrich et al. |
Detector
|
08 Jul 2009 |
| D0901383-x0 |
ADVL_ARM_CVTY_BAFF_EARTHQ_STOP |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
08 Jul 2009 |
| D0901382-x0 |
ADVL_ARM_CVTY_BAFF_BSC3_CYL_BRKT |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
08 Jul 2009 |
| D0901381-x0 |
ADVL_ARM_CAVITY_BAFFLE_BSC3_CYL |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
08 Jul 2009 |
| D0901374-x0 |
ADVL_CAVITY_BAFFLE_CYL. |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
08 Jul 2009 |
| G0900652-v2 |
Gravitational wave detectors - broadening their horizon |
Marielle van Veggel |
Detector
|
08 Jul 2009 |
| G0900578-v1 |
Control of AIGO High Performance Vibration Isolation System in an 80 m Fabry-Perot Cavity |
Jean-Charles Dumas |
Seismic Isolation
|
07 Jul 2009 |
| E0900184-x0 |
DCN - HLTS Intermediate Wire Parts |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
07 Jul 2009 |
| D0901363-x0 |
AdLIGO AOS OpLev Telescope Adjustment Platform |
Craig Conley |
Auxiliary Optics
|
07 Jul 2009 |
| G0900579-v1 |
Suspension loss in Advanced gravitational wave detectors |
Alan Cumming |
Suspensions
|
07 Jul 2009 |
| D0901361-x0 |
AdLIGO AOS OpLev Beam Steering Mechanism |
Craig Conley |
Auxiliary Optics
|
07 Jul 2009 |
| E0900173-x0 |
DCN - HLTS Intermediate Mass Parts |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
07 Jul 2009 |
| G0900673-v1 |
Gravity Waves: Next Window on the Universe |
Thomas Nash et al. |
Continuous Wave
Compact Binaries
Data Analysis
Detector
GW Bursts
Activity
Astrophysics / Multi-messenger
|
06 Jul 2009 |
| G0900585-v1 |
Demonstration Of A Diffractively-Coupled Fabry Perot Cavity |
Matthew Edgar et al. |
Input Optics
Basic R&D
|
06 Jul 2009 |
| G0900523-v1 |
The transition to GEO HF |
Harald Lueck |
Detector
Upgrades
|
06 Jul 2009 |
| T0900278-v2 |
ALIGO NP-type: Preparations and hazard analysis for test hangs at LASTI in July/August 2009 |
Giles Hammond et al. |
System Test
Suspensions
|
02 Jul 2009 |
| G0900467-v2 |
Characterizing Coherent Scatter from Interferometer Mirror Roughness |
William Kells et al. |
Core Optics
|
02 Jul 2009 |
| D0901341-x0 |
ADVL_MANIFOLD_CRYO_BAFFLE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
01 Jul 2009 |
| D0900772-v1 |
AdvLIGO AOS Pier Base |
Craig Conley |
Auxiliary Optics
|
01 Jul 2009 |
| D0900771-v1 |
AdvLIGO AOS Pier Side Panel |
Craig Conley |
Auxiliary Optics
|
01 Jul 2009 |
| D0900773-v2 |
AdvLIGO AOS Pier Table |
Craig Conley |
Auxiliary Optics
|
01 Jul 2009 |
| E0900186-v1 |
DCN for initial release of Advanced LIGO Interferometer for Full Aperture Surface Figure Metrology |
GariLynn Billingsley |
Core Optics
|
01 Jul 2009 |
| G0900600-v1 |
Exploring Coating Thermal Noise via Loss in Fused Silica Coatings |
Steven Penn |
Core Optics
Basic R&D
|
30 Jun 2009 |
| G0900604-v1 |
Aligning Advanced Detectors |
Lisa Barsotti |
Sensing and Control
|
30 Jun 2009 |
| D080448-v1 |
Passive Tip-Tilt Structure Assembly |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jun 2009 |
| D080722-v1 |
Passive Tip-Tilt ECD (Low-Damping) |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jun 2009 |
| D080450-v1 |
Passive Tip-Tilt ECD Mount |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jun 2009 |
| G0900598-v1 |
Current Status and Future Plans for the LIGO Thermal Compensation System (TCS) |
Virginio Sannibale et al. |
Core Optics
Laser Systems
Detector
|
29 Jun 2009 |
| E0900174-v1 |
DCN - Updates to AdLIGO AOS Pier Weldment Prototype |
Craig Conley |
Auxiliary Optics
|
25 Jun 2009 |
| E080337-v1 |
Drawing Tree - OMC SUS (LHO) Overall Assembly and Fixtures |
Derek Bridges |
Suspensions
Basic R&D
|
25 Jun 2009 |
| D0901300-x0 |
SYNRAD_48-2KWL_LASER_ASSEMBLY |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
24 Jun 2009 |
| D0901287-v1 |
SUS OPTICAL TEST BENCH |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
24 Jun 2009 |
| E0900145-v2 |
Drawing Tree - AdLIGO AOS Optical Lever Pier Weldment Prototype |
Craig Conley |
Auxiliary Optics
|
24 Jun 2009 |
| E080418-v1 |
DCN - HAM Large Triple Suspension Blade and Wire Clamps |
Michael Meyer |
Change Control
Suspensions
Preliminary Design
|
23 Jun 2009 |
| D0901290-x0 |
SUS_OPTICAL_TEST_BENCH_LEVELING_FOOT |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
23 Jun 2009 |
| D0901289-x0 |
SUS_OPTICAL_TEST_BENCH_SOLID_TOP |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
23 Jun 2009 |
| G0900538-v1 |
Status of the H1 Squeezer Experiment |
Daniel Sigg |
Sensing and Control
|
21 Jun 2009 |
| T0900244-v1 |
Triboelectric Effect in ESD Drive Cable |
Rich Abbott |
System Engineering
Basic R&D
|
19 Jun 2009 |
| E0900162-x0 |
DCN - HLTS Earthquake Stop Mounts and Assemblies |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
19 Jun 2009 |
| G0900586-v1 |
Flame welding tests for monolithic suspensions of the mirrors of future GW interferometers. |
Giles Hammond et al. |
Basic R&D
Suspensions
|
19 Jun 2009 |
| G0900588-v1 |
Sensor for the control and damping of ‘violin-mode’ resonances in silica suspension fibres. |
Nick Lockerbie et al. |
Sensing and Control
Suspensions
|
19 Jun 2009 |
| G0900507-v2 |
Overview of monolithic suspension work for Advanced LIGO |
Timothy Bodiya et al. |
Basic R&D
Suspensions
|
19 Jun 2009 |
| D0901282-x0 |
breadboards- BSC ISI AdLIGO |
Stephany Foley |
Seismic Isolation
|
19 Jun 2009 |
| E0900144-v1 |
DCN AdvLIGO AOS Optical Lever Pier Weldment Prototype |
Craig Conley |
Auxiliary Optics
|
18 Jun 2009 |
| D0901279-x0 |
TSC_RING_HEATER_ELEMENT |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
17 Jun 2009 |
| D0901277-x0 |
SUS_MEZZANINE_LAB_OPTICAL_BENCH_ASSEM |
Ken Mailand |
Preliminary Design
Suspensions
|
17 Jun 2009 |
| D0901274-x0 |
ELLIPTICAL_BAFFLE_FRAME_APERTURE_BSC7-8 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
17 Jun 2009 |
| D0901273-x0 |
ELLIPTICAL_BAFFLE_APERTURE_SUS_TUBE_BSC7-8 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
17 Jun 2009 |
| D0901272-x0 |
ADV_LIGO_UPPER_SUS_TUBE_ASSEM |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
17 Jun 2009 |
| D080714-v1 |
RF Distribution Amplifier: Monitor |
Daniel Sigg |
Sensing and Control
|
16 Jun 2009 |
| D0900823-x0 |
Blade Characterization Stand - Table (Reference Only) |
Michael Meyer |
Suspensions
Conceptual Design
|
15 Jun 2009 |
| T0900138-v1 |
Frequency Difference Divider |
Daniel Sigg |
Sensing and Control
|
15 Jun 2009 |
| D0900629-v1 |
Low Noise Voltage Controlled Oscillator: Panel |
Daniel Sigg |
Sensing and Control
|
15 Jun 2009 |
| D0901247-x0 |
AdLIGO BSC ISI Position sensor assembly bracket- horizontal |
Stephany Foley |
Seismic Isolation
|
15 Jun 2009 |
| D0901244-x0 |
Blade Characterization Stand - Wheel Carriage |
Michael Meyer |
Suspensions
Conceptual Design
|
15 Jun 2009 |
| D0901238-x0 |
AdLIGO BSC ISI Large acutator position sensor assembly bracket |
Stephany Foley |
Seismic Isolation
|
12 Jun 2009 |
| D0901236-x0 |
AdLIGO BSC ISI Actuator Position Sensor Assembly |
Stephany Foley |
Seismic Isolation
|
12 Jun 2009 |
| D0901235-x0 |
AdLIGO BSC ISI Actuator Target Assembly |
Stephany Foley |
Seismic Isolation
|
12 Jun 2009 |
| D0901227-x0 |
CO2_ITM_STEERING_MIRROR_M2_SUSPENSION |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901226-x0 |
CO2_ITM_STEERING_MIRROR_M1_SUSPENSION |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901225-x0 |
H2_TCS_CO2_STEERING_MIRROR_SUSPENSION |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901224-x0 |
CO2_ITM_STEERING_MIRROR_M1_FLEXURE_ASSEM. |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901223-x0 |
CO2_ITM_STEERING_MIRROR_M2_FLEXURE_ASSEM. |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901222-x0 |
CO2 ITM STEERING MIRROR M1 FLEXURE |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901221-x0 |
CO2_ITM_STEERING_MIRROR_M2_FLEXURE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901220-x0 |
CO2_ITM_STEERING_MIRROR_M2 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901219-x0 |
CO2_ITM_STEERING_MIRROR_M1 |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901218-x0 |
H2_TCS_CO2_STEERING_MIRROR_BRACKET |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901217-x0 |
H2_TCS_CO2_STEERING_MIRROR_CLAMP |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901216-x0 |
H2_TCS_CO2_STEERING_MIRROR_FLEXURE_ASSEM. |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901215-x0 |
H2_TCS_CO2_STEERING_MIRROR_FLEXURE |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| D0901214-x0 |
H2_TCS_CO2_STEERING_MIRROR |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901213-x0 |
PR2_SCRAPER_BAFFLE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901207-x0 |
SR2_SCRAPER _BAFFLE_BASE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
11 Jun 2009 |
| D0901206-x0 |
SR2_SCRAPER_BAFFLE_HORN |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
11 Jun 2009 |
| E0900166-x0 |
DCN - HLTS Upper Blade Bake Fixture |
Derek Bridges |
Change Control
Suspensions
Preliminary Design
|
11 Jun 2009 |
| D070558-v1 |
Side Support, Upper Blade Bake Fixture |
Derek Bridges |
Suspensions
Preliminary Design
|
11 Jun 2009 |
| D0901201-x0 |
SR2_SCRAPER_BAFFLE |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
10 Jun 2009 |
| D0901200-x0 |
ARM_CAVITY_BAFFLE_SUSPENSION |
Ken Mailand |
Auxiliary Optics
Preliminary Design
|
10 Jun 2009 |
| D0901198-x0 |
ARM_CAVITY_BAFFLE_SUPPORT_PL. |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
10 Jun 2009 |
| D0901199-x0 |
COC_WIDE_ANGLE_BAFFLE |
Ken Mailand |
Preliminary Design
Auxiliary Optics
|
10 Jun 2009 |
| D070484-v1 |
EQ BRACKET SIDE ALT |
Bobby Moore |
Final Design
Suspensions
|
10 Jun 2009 |
| D070049-v1 |
EQ BRACKET TOP |
Bobby Moore |
Final Design
Suspensions
|
10 Jun 2009 |
| D0901196-x0 |
AdLIGO BSC ISI large horizontal actuator connector |
Stephany Foley |
Seismic Isolation
|
10 Jun 2009 |
| D0901195-x0 |
AdLIGO BSC ISI Large Vertical Actuator Coil Bracket |
Stephany Foley |
Seismic Isolation
|
10 Jun 2009 |
| D0901194-x0 |
AdLIGO BSC ISI Large Vertical Actuator Assembly |
Stephany Foley |
Seismic Isolation
|
10 Jun 2009 |
| D0901193-x0 |
HSTS Structural Weldment Gusset (4.25x3x0.375) |
Michael Meyer |
Preliminary Design
Suspensions
|
10 Jun 2009 |
| D0901192-x0 |
HSTS Structrural Weldment |
Michael Meyer |
Suspensions
Preliminary Design
|
10 Jun 2009 |
| D0901191-x0 |
HSTS Structural Weldment Gusset (3x3x0.25") |
Michael Meyer |
Preliminary Design
Suspensions
|
10 Jun 2009 |
| E080427-v1 |
DCN - As-Built Drawings for OMC Suspensions |
Derek Bridges |
Suspensions
Change Control
|
09 Jun 2009 |
| D0901190-x0 |
PR3__ELLIPTICAL_BAFFLE_FORM |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
09 Jun 2009 |
| D0901188-x0 |
HSTS Structural Weldment Gusset (3 x 3 x 0.375") |
Michael Meyer |
Suspensions
Preliminary Design
|
09 Jun 2009 |
| D0901187-x0 |
AdLIGO BSC ISI large horizontal actuator coil bracket |
Stephany Foley |
Seismic Isolation
|
09 Jun 2009 |
| D0901186-x0 |
AdLIGO BSC ISI large horizontal actuator magnet bracket |
Stephany Foley |
Seismic Isolation
|
09 Jun 2009 |
| D0901185-x0 |
AdLIGO BSC ISI Large Horizontal Actuator Assembly |
Stephany Foley |
Seismic Isolation
|
09 Jun 2009 |
| D0901184-x0 |
large vertical actuator magnet bracket- BSC ISI AdLIGO |
Stephany Foley |
Seismic Isolation
|
09 Jun 2009 |
| T0900204-v2 |
Analysis of iLigo Witness Plate by Battelle, PNNL |
GariLynn Billingsley et al. |
Core Optics
Basic R&D
|
09 Jun 2009 |
| E0900160-x0 |
DCN - HLTS Upper Wire Assembly and Upper Wire Jig |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
08 Jun 2009 |
| D0901171-x0 |
actuator post - AdLIGO BSC ISI |
Stephany Foley |
Seismic Isolation
|
08 Jun 2009 |
| E0900130-v1 |
DCN 35 WATT AIR COOLED BEAM DUMP |
Ken Mailand |
Auxiliary Optics
Final Design
|
05 Jun 2009 |
| E0900159-x0 |
DCN - HLTS Top Blade Guard |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
04 Jun 2009 |
| D0901158-x0 |
A-1_ADAPTOR_ADLIGO_VE |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
03 Jun 2009 |
| D0901141-x0 |
AdvLIGO AOS Optical Lever Adjustment Transfer Assy |
Craig Conley |
Auxiliary Optics
|
02 Jun 2009 |
| D0901136-x0 |
AdvLIGO AOS Optical Lever Sight Adjustment Carriage Assy |
Craig Conley |
Auxiliary Optics
|
02 Jun 2009 |
| D0900822-v2 |
LLO As Built HAM6 optical layout |
Sam Waldman |
Sensing and Control
Final Design
|
02 Jun 2009 |
| G0900410-v1 |
Overview of the LIGO-GEO S5 and Virgo VSR1 Science Runs, and Sources of Transient Gravitational Waves |
Matthew Evans |
Data Analysis
Detector
|
01 Jun 2009 |
| G0900427-v2 |
Results from Prototype Advanced LIGO Seismic Isolation |
Jeffrey Kissel |
Seismic Isolation
|
29 May 2009 |
| G0900367-v2 |
Update on Suspension Design for Advanced LIGO |
Norna Robertson |
Suspensions
|
29 May 2009 |
| D071075-v2 |
Flexure Post Bracket, Rad |
Andy Stein et al. |
Seismic Isolation
Final Design
|
22 May 2009 |
| D071490-v1 |
Asm, Shipping Brace |
Sam Barnum |
Seismic Isolation
Final Design
|
22 May 2009 |
| D0901059-x0 |
BSC7-8_APERTURE |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
22 May 2009 |
| G0900459-v2 |
ETM Transmission Monitor Status |
Sam Waldman |
Sensing and Control
|
22 May 2009 |
| D071251-v2 |
Gang Barrel Nut |
Andy Stein et al. |
Final Design
Seismic Isolation
|
22 May 2009 |
| D071255-v2 |
Wiring Breadboard, Large |
Sam Barnum |
Final Design
Seismic Isolation
|
22 May 2009 |
| D071421-v1 |
Asm, Stage 1 Pre-Asm |
Sam Barnum |
Seismic Isolation
Final Design
|
22 May 2009 |
| D071480-v1 |
ASM, Adjustment Masses |
Sam Barnum |
Seismic Isolation
Final Design
|
22 May 2009 |
| D0900897-v1 |
Earthquake Stop for Glass (No Glass Tip), Simplified, 2 Inch |
Derek Bridges |
Suspensions
Final Design
|
21 May 2009 |
| E0900152-x0 |
DCN - Earthquake Stops |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
21 May 2009 |
| E0900066-x0 |
DCN - HAM Large Triple Suspension Nonsuspended Hardware |
Derek Bridges |
Change Control
Basic R&D
Suspensions
|
21 May 2009 |
| D0900813-v1 |
ELIGO_35_WATT_BEAM_DUMP_P.POL_PIVOT |
Ken Mailand |
Final Design
Auxiliary Optics
|
21 May 2009 |
| E0900131-v2 |
35 Watt Air Cooled Beam Dump Assembly Procedures |
Ken Mailand |
Installation
Auxiliary Optics
|
21 May 2009 |
| E0900155-x0 |
DCN - HLTS Lower Blade Library of Clamps |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
21 May 2009 |
| T0900157-v2 |
Proposed changes for the Advanced LIGO Output Mode Cleaner |
Sam Waldman |
Sensing and Control
Final Design
|
21 May 2009 |
| D0901046-x0 |
AdvLIGO SYSTEMS_BSC2_ITMY_ELLIPTICAL_BAFFLE_CLAMP_HOLE_TRANSFER_PL |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
20 May 2009 |
| D0901044-x0 |
BSC2_TABLE_RING_DIMENSIONS_ |
Ken Mailand |
Auxiliary Optics
Installation
|
20 May 2009 |
| D0900177-v1 |
ELIGO_35_WATT_AIR_COOLED_BEAM_DUMP_4"_S.POL |
Ken Mailand |
Auxiliary Optics
Final Design
|
20 May 2009 |
| D0900095-v1 |
ELIGO_35_WATT_AIR_COOLED_BEAM_DUMP_3INCH_P.POL |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
20 May 2009 |
| D0900934-v1 |
ELIGO_35_WATT_AIR_COOLED_BEAM_DUMP_AIMING_MIRROR |
Ken Mailand |
Final Design
Auxiliary Optics
|
20 May 2009 |
| D0900969-v1 |
35W_AIR_COOL_BEAM_DUMP_TARGET_ASSEM. |
Ken Mailand |
Final Design
Auxiliary Optics
|
20 May 2009 |
| T0900207-v1 |
AdL Triple Low Current Driver Final Design Report |
Jay Heefner |
Final Design
Suspensions
|
20 May 2009 |
| G0900434-v4 |
LIGO and the Search for Gravitational Waves |
Warren Anderson et al. |
Meeting
Data Analysis
Detector
|
19 May 2009 |
| E0900154-x0 |
DCN - HLTS Upper Blade Library of Clamps |
Derek Bridges |
Preliminary Design
Suspensions
Change Control
|
19 May 2009 |
| E0900150-v1 |
DCN - AdLIGO AOS Pier Installation Template |
Craig Conley |
Auxiliary Optics
|
15 May 2009 |
| E0900065-x0 |
DCN - HAM Large Triple Suspension Suspended Hardware |
Derek Bridges |
Suspensions
Basic R&D
Change Control
|
15 May 2009 |
| D0901025-x0 |
Cap, Resin, Earthquake Stop |
Derek Bridges |
Preliminary Design
Suspensions
|
15 May 2009 |
| D0901035-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_RETAINER |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901034-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_PIN |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901033-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_WASHER |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901032-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_CLAMP |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901031-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_O'RING |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901030-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_TUBE |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901029-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_FOOT |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901028-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_BLOCK |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901027-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_FRAME |
Ken Mailand |
Conceptual Design
Auxiliary Optics
|
14 May 2009 |
| D0901024-x0 |
ELLIPTICAL_BAFFLE_FORM_LAYOUT_ASSEMBLY |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
14 May 2009 |
| D0901019-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.75 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901018-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901017-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901016-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901015-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.75 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901014-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901013-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901022-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 2.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901021-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 2.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901012-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901011-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901010-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.75 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901009-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.5 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901008-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901007-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901005-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.4375 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901004-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.375 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901003-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.3125 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901002-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.25 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0901001-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0901000-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.125 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900998-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.75 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900996-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 1.25 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900995-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.75 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900994-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900993-x0 |
Screw, Socket Head Cap, 1/4-20 UNC-2A X 0.25 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900992-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 2 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900989-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1.25 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900988-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900987-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.75 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900986-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900985-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.375 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900984-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.25 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900983-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900982-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.5 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900981-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.4375 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900979-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.3125 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900978-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.25 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900977-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.1875 Long, Fully Threaded, Rounded End |
Derek Bridges |
Final Design
System Engineering
|
13 May 2009 |
| D0900976-x0 |
Screw, Socket Head Cap, #4-40 UNC-2A X 0.125 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
13 May 2009 |
| D0900853-x0 |
AdLIGO AOS Pier Installation Dam |
Craig Conley |
Auxiliary Optics
|
13 May 2009 |
| D0900959-x0 |
AdLIGO AOS Optical Lever Spherical Joint, Female |
Craig Conley |
Auxiliary Optics
|
13 May 2009 |
| D0900960-x0 |
AdLIGO AOS Optical Lever Spherical Joint, Male |
Craig Conley |
Auxiliary Optics
|
13 May 2009 |
| D0900814-v1 |
ELIGO_35_WATT_BEAM_DUMP_P.POL_PIVOT_PL. |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900812-v1 |
ELIGO_35_WATT_BEAM_DUMP_P.POL_FOOT |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900345-v1 |
ELIGO_35_WATT_AIR_COOLED_BEAM_DUMP_SI_SUBSTRATE |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900321-v1 |
ELIGO_35_WATT_HEAT_SINK_BODY |
Ken Mailand |
Auxiliary Optics
Conceptual Design
|
13 May 2009 |
| D0900329-v1 |
HEAT _SINK_35_WATT_BEAM_DUMP_ INSIDE_PLATE |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900326-v1 |
ELIGO_35_WATT_ AIR_COOLED_BEAM_DUMP- TOP PLATE |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900765-v1 |
ELIGO_35_WATT_ AIR_COOLED_BEAM_DUMP_BOTTOM _PLATE |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900328-v1 |
HEAT _SINK_35_WATT_BEAM_DUMP_ OUTSIDE_PLATE |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900815-v1 |
ELIGO_35_WATT_BEAM_DUMP_APERTURE_PL |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900810-v1 |
ELIGO_35_WATT_BEAM_DUMP_S.POL_FOOT_SPACER |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900809-v1 |
ELIGO_35_WATT_BEAM_DUMP_S.POL_FOOT |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900811-v1 |
ELIGO_35_WATT_BEAM_DUMP_S.POL_FOOT_SPACER_LH |
Ken Mailand |
Final Design
Auxiliary Optics
|
13 May 2009 |
| D0900843-v1 |
ELIGO_35W_AIR_COOL_BM_DUMP_TARGET |
Ken Mailand |
Auxiliary Optics
Final Design
|
13 May 2009 |
| D0900971-x0 |
Cylindrical Shell, 60.50" ID |
Dennis Coyne |
Vacuum
Final Design
|
12 May 2009 |
| D0900974-x0 |
Support Plate, 6 x 12 x 1.375, LIGO VE |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D0900973-x0 |
Support Tubing, 4 x 2 x 0.1875, LIGO VE |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D0900972-x0 |
Support Assembly, Adapter A-18, LIGO VE |
Dennis Coyne |
Vacuum
Final Design
|
12 May 2009 |
| D0900970-x0 |
Cylindrical Shell, 72.25 ID |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D0900968-x0 |
Flange, Flat Faced, 50 1/2" ID x 68 1/4" OD, LIGO VE |
Dennis Coyne |
Vacuum
Final Design
|
12 May 2009 |
| D0900967-x0 |
Ring, Angle, 4" x 4" x 1/4", LIGO VE |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D0900966-x0 |
Flange, Grooved, 72 1/4 ID x 80 OD, LIGO VE |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D0900965-x0 |
Flange, Reducing, 61.06 ID x 72.12 OD x 1 Thk, LIGO VE |
Dennis Coyne |
Vacuum
Final Design
|
12 May 2009 |
| D0900964-x0 |
Lifting Lug |
Dennis Coyne |
Vacuum
Final Design
|
12 May 2009 |
| D0900962-x0 |
Cylindrical Shell for Adapter A-16, 44 5/8" ID, LIGO VE |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| E0900139-x0 |
DCN for release of gold coating specifications and mask drawings for Advanced LIGO |
GariLynn Billingsley |
Final Design
Sensing and Control
Core Optics
Auxiliary Optics
|
12 May 2009 |
| E0900142-v1 |
End Reaction Mass Barrel Coating |
GariLynn Billingsley |
Core Optics
Auxiliary Optics
System Engineering
Suspensions
Final Design
|
12 May 2009 |
| D047932-v2 |
Locker Sleeve Housing |
Andy Stein |
Final Design
Seismic Isolation
|
12 May 2009 |
| D0900945-v1 |
Gold Coating Pattern, Test Mass Barrel |
Calum Torrie |
System Engineering
|
12 May 2009 |
| E0900141-v1 |
HAM 6 - Tip Tilt Clamps Traveler |
Betsy Weaver |
Detector
|
12 May 2009 |
| E080041-v1 |
Specification: Mirror Blank Material, Adv. LIGO Recycling Mirror 3 |
GariLynn Billingsley et al. |
Core Optics
Fabrication
Final Design
|
12 May 2009 |
| E080045-v1 |
Specification: Blank Material, Adv. LIGO Folding Mirror |
GariLynn Billingsley et al. |
Core Optics
Final Design
Fabrication
|
12 May 2009 |
| E080037-v1 |
Specification: Blank Material, Adv. LIGO Compensation Plate |
GariLynn Billingsley et al. |
Final Design
Fabrication
Core Optics
|
12 May 2009 |
| E0900132-x0 |
DCN for initial release of Core Optic Coating Specifications for Adv. LIGO |
Dennis Coyne |
Change Control
Core Optics
Final Design
Fabrication
|
12 May 2009 |
| D0900952-x0 |
tie-rod bracket for vacuum equipment spools and adapters |
Dennis Coyne |
Final Design
Vacuum
|
12 May 2009 |
| D070534-v2 |
Actuator Stop |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071301-v2 |
Angle Brace, Shipping |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071300-v2 |
Plate, Shipping |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D0900832-v1 |
Locating Bar, Horiz GS-13 Shelf, HAM ISI |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900338-v1 |
Brace, Horiz GS-13 Shelf, HAM ISI |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900337-v1 |
Mounting Bar, Horiz GS-13 Shelf, HAM ISI |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D0900336-v1 |
Plate, Horiz GS-13 Shelf, HAM ISI |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071317-v2 |
Actuator Set-Up Fixture, Plate 2 |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071316-v2 |
Actuator Set-Up Fixture, Plate 1 |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900318-v1 |
Bracket Base, Horz L4-C, HAM ISI |
Andy Stein et al. |
Seismic Isolation
Preliminary Design
|
11 May 2009 |
| D0900320-v1 |
Gusset, Horz L4-C, HAM ISI |
Andy Stein et al. |
Seismic Isolation
Preliminary Design
|
11 May 2009 |
| D0900310-v1 |
Dog Clamp, Vert L4-C, HAM ISI |
Andy Stein |
Seismic Isolation
Preliminary Design
|
11 May 2009 |
| D071322-v2 |
GS-13 Weld Nut Heat Sink |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071320-v2 |
Spring Pull-Down, Offset Washer |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071308-v2 |
Spring Pull-Down, Nut |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071303-v2 |
Spring Pull-Down, Pull Rod |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071302-v2 |
Spring Pull-Down, Rod End Spacer |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071305-v2 |
Spring Pull-Down, Cap |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071309-v2 |
Spring Pull-Down, ACME Screw |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071304-v2 |
Spring Pull-Down, Conversion Bushing |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071306-v2 |
Spring Pull-Down, Bar |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071307-v2 |
Spring Pull-Down, Base |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071312-v2 |
GS-13 Install, Standoff |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071314-v2 |
GS-13 Install, Right Rail |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071311-v2 |
GS-13 Install, Left Rail |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071310-v2 |
GS-13 Install, Slider-Stop |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071313-v2 |
GS-13 Install, Base |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071129-v2 |
Actuator Setup Bar |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071183-v2 |
GS-13 Cable Restraint |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071201-v2 |
Mass Spacer |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071136-v2 |
SHCS, Custom Captive |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071321-v2 |
Spring Tension Bushing |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071182-v2 |
Weld Nut, Custom |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071181-v2 |
GS-13 Stabilizer |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071167-v2 |
Sensor Target Post |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071166-v2 |
Sensor Target Body |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071160-v2 |
Sensor Target Mount |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900635-v1 |
Locker Pin Cap |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071140-v2 |
Locker Sleeve Base |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D047936-v2 |
Locker Pin Base |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071163-v2 |
Sensor Head Mount |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071161-v2 |
Sensor Head Base |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071175-v2 |
Semsor Head Bracket, Vert |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071162-v2 |
Sensor Head Washer |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071164-v2 |
Sensor Head Base Plate |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071170-v2 |
Sensor Head Standoff, Horiz |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071122-v2 |
Actuator U-Bracket, Vert |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071132-v2 |
Actuator L-Bracket, Horiz |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071123-v2 |
Actuator Thermal Bar |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071121-v2 |
Actuator Coil Support |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071076-v2 |
Flexure Post Bracket, Tan |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071074-v2 |
Flexure Post |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071063-v2 |
Keel Wall |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071250-v2 |
Barrel Nut |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071141-v2 |
Locker Spacer |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071067-v2 |
Spring Hatch, Optics Table |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071073-v2 |
Rib Bracket, 60 Deg |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071059-v2 |
Outer Wall, Small Panel |
Andy Stein et al. |
Final Design
Seismic Isolation
|
11 May 2009 |
| D0900312-v1 |
Wiring Breadboard, Small |
Andy Stein |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071072-v2 |
Rib, Tan, Flexure Mid Cover |
Andy Stein |
Final Design
Seismic Isolation
|
11 May 2009 |
| D071061-v2 |
Outer Wall, Bracket 90 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071009-v2 |
Particle Fence |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071005-v2 |
Support Post Gusset, Main |
Andy Stein et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| D071004-v2 |
Support Post Gusset, Aux |
Sam Barnum et al. |
Seismic Isolation
Final Design
|
11 May 2009 |
| T0900185-v1 |
Iterative Functional Synthesis of Coatings |
Rand Dannenberg |
Core Optics
Reports
Other data analysis
Modelling
|
11 May 2009 |
| T980044-v1 |
Determination of Global and Local Coordinate Axes for the LIGO Sites |
Albert Lazzarini |
Installation
Integration
Vacuum
System Engineering
|
11 May 2009 |
| D950148-v2 |
LVEA and VEA Foundations Relative to the Beam Tube Center Line |
Dennis Coyne |
Vacuum
Integration
System Engineering
Installation
|
10 May 2009 |
| D071003-v2 |
Support Post Cap |
Andy Stein et al. |
Final Design
Seismic Isolation
|
08 May 2009 |
| D047845-v1 |
Stage 2 Structure Sub-Assembly |
Andy Stein |
Seismic Isolation
Final Design
|
08 May 2009 |
| D048048-v1 |
Lift Hook Assy, BSC Assy |
Andy Stein |
Final Design
Seismic Isolation
|
08 May 2009 |
| E0900126-v2 |
LLO HAM6 AFWFS installation |
Sam Waldman |
Installation
Sensing and Control
|
08 May 2009 |
| D0900927-v1 |
N Patch Panel Assembly |
Daniel Sigg |
Sensing and Control
|
08 May 2009 |
| D030027-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 2 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges et al. |
Fabrication
Document Migration
System Engineering
|
08 May 2009 |
| D030026-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 1.75 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges et al. |
Fabrication
System Engineering
Document Migration
|
08 May 2009 |
| D030024-x0 |
Screw, Socket Head Cap, #8-32 UNC-2A X 0.375 Long, Fully Threaded, Rounded End, Ag-Plated |
Derek Bridges et al. |
System Engineering
Document Migration
Fabrication
|
08 May 2009 |
| D070281-v1 |
OMC DCPD Whitening Preamplifier Board Drawing |
Rich Abbott |
Sensing and Control
|
08 May 2009 |
| S080001-x0 |
OMC Tip/Tilt Hardware Shutter Chassis |
Rich Abbott |
Sensing and Control
|
26 Nov 2008 |
| D071471-v2 |
Asm, Stabilizer, GS-13 |
Andy Stein et al. |
Seismic Isolation
Final Design
|
07 May 2009 |
| D0900610-v1 |
N Patch Panel (Generic) |
Daniel Sigg |
Sensing and Control
|
07 May 2009 |
| D0900611-v1 |
N Patch Panel (WFS1/2) |
Daniel Sigg |
Sensing and Control
|
07 May 2009 |
| D071499-v2 |
Asm, Spring Tension Screw |
Andy Stein et al. |
Final Design
Seismic Isolation
|
07 May 2009 |
| T0900222-v1 |
CIT Sprayed First Contact & Charging Tests 5-6-09 |
Rand Dannenberg |
Core Optics
Installation
|
07 May 2009 |
| T0900221-v1 |
CIT Sprayed First Contact Peeling & Charging Tests 5-3-09 |
Rand Dannenberg |
Installation
Core Optics
|
07 May 2009 |
| D020466-v1 |
SMALL TRIPLES 10x10mm Magnet |
Calum Torrie |
Suspensions
Basic R&D
|
07 May 2009 |
| T0900179-v1 |
Manufacturing Study of Two ETM Designs |
Rand Dannenberg |
Core Optics
Reports
Other data analysis
Modelling
|
07 May 2009 |
| T0900181-v1 |
TNI Coating Modeling |
Rand Dannenberg |
Reports
Modelling
Other data analysis
Core Optics
|
07 May 2009 |
| T0900182-v1 |
Modeling of Absorption from Surface Contamination of Dielectric Mirror |
Rand Dannenberg |
Reports
Other data analysis
Modelling
Core Optics
|
07 May 2009 |
| T0900183-v1 |
Rugated Mirrors - Thermal Noise Study |
Rand Dannenberg |
Core Optics
Reports
Modelling
Other data analysis
|
07 May 2009 |
| T0900184-v1 |
Rugated Mirrors - Profiles for Two Wavelength Reflectors |
Rand Dannenberg |
Modelling
Other data analysis
Reports
Core Optics
|
07 May 2009 |
| T0900186-v1 |
Optical Dark Field Microscopy with First Contact |
Rand Dannenberg |
Fabrication
Other data analysis
Reports
Core Optics
|
07 May 2009 |
| D0900659-v1 |
Glasgow Cantilever Drawings Old / Original |
Rand Dannenberg |
Basic R&D
Core Optics
Reports
Other data analysis
|
07 May 2009 |
| T0900218-v1 |
Relation Between Loss Angle & Per mol-atom Specific Heat |
Rand Dannenberg et al. |
Other data analysis
Core Optics
Basic R&D
|
07 May 2009 |
| S0900022-v2 |
ISI Interface Chassis - HAM Version |
David Kinzel |
Seismic Isolation
|
07 May 2009 |
| D048047-v1 |
Base, Lift Hook, BSC Assembly |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D048046-v1 |
Plate, Lift Hook, BSC Assy |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D048045-v1 |
Pin, Lift Hook, BSC Assembly |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D048017-v1 |
Retain, Lift Pin, BSC Assy |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047866-v1 |
Trim Weight Plate, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047865-v1 |
Angle Bracket, Short, Bay Bulkhead, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047863-v1 |
Plate, Bay Bulkhead, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047862-v1 |
Plate, Keel Table Brace, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047861-v1 |
Plate, Bay Closeout, GS-13, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047859-v1 |
Gusset, GS-13, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047858-v1 |
Hex Wall Splice, Keel, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047857-v1 |
Hex Wall Half, Keel Table Side, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047856-v1 |
Angled Hex Wall, Keel, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047855-v1 |
Hex Wall Splice - Optical Side, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047854-v1 |
Hex Wall Half - L and R, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047853-v1 |
Angled Hex Wall, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047852-v1 |
Plate, Side (GS-13), Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047851-v1 |
Plate, Side, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047850-v1 |
Baseplate, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047849-v1 |
Keel Plate, Lower, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047848-v1 |
Keel Plate, Upper, Stage 2 |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D047847-v1 |
Lower Optical Table, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D047846-v1 |
Upper Optical Table, Stage 2 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| D0900175-v1 |
HAM HEPI Install Tooling Plate |
Andy Stein |
Seismic Isolation
Final Design
|
06 May 2009 |
| D071410-v1 |
Asm, Stage 0 |
Andy Stein |
Final Design
Seismic Isolation
|
06 May 2009 |
| T0900216-v1 |
RF Demodulator Test Procedure |
Daniel Sigg |
Sensing and Control
|
06 May 2009 |
| T0900215-v1 |
RF Amplifier Test Procedure |
Daniel Sigg |
Sensing and Control
|
06 May 2009 |
| D0900907-x0 |
Earthquake Stop for Glass, Simplified |
Derek Bridges |
Preliminary Design
Suspensions
|
06 May 2009 |
| D060456-x0 |
Impact Absorber, Earthquake Stop |
Derek Bridges et al. |
Document Migration
Preliminary Design
Suspensions
|
06 May 2009 |
| T0900190-v1 |
AdL Triple Low Current Driver Board Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
06 May 2009 |
| G0900433-v1 |
AdL Low Current Triple Driver Design |
Jay Heefner |
Suspensions
|
06 May 2009 |
| T0900211-x0 |
Welding tests at Glasgow (5-8 May 2009) |
Marielle van Veggel et al. |
Final Design
Suspensions
|
06 May 2009 |
| D080672-v1 |
Kaman Sensor Target |
Andy Stein |
Seismic Isolation
Final Design
|
05 May 2009 |
| D080671-v1 |
Kaman Sensor Mount 2 |
Andy Stein |
Final Design
Seismic Isolation
|
05 May 2009 |
| D080670-v1 |
Kaman Sensor Mount 1 |
Andy Stein |
Seismic Isolation
Final Design
|
05 May 2009 |
| D080675-v1 |
ADE Sensor Target |
Andy Stein |
Final Design
Seismic Isolation
|
05 May 2009 |
| D080674-v1 |
ADE Sensor Mount |
Andy Stein |
Seismic Isolation
Final Design
|
05 May 2009 |
| D080713-v1 |
RF Distribution Amplifier: Panel |
Daniel Sigg |
Sensing and Control
|
05 May 2009 |
| D071002-v2 |
Support Post |
Andy Stein et al. |
Seismic Isolation
Final Design
|
04 May 2009 |
| T0900209-v1 |
Thermal noise of GEO's beamsplitter |
Kentaro Somiya |
Modelling
Core Optics
|
04 May 2009 |
| D0900884-x0 |
AdL Triple Low Current Driver Board |
Jay Heefner |
Suspensions
|
04 May 2009 |
| P080119-v2 |
Opto-acoustic Interactions in Gravitational Wave Detectors: Comparing Flat-Topped Beams with Gaussian Beams |
Li Ju et al. |
Detector
|
03 May 2009 |
| D070360-x0 |
Mounting Bracket, Left, Coil Holder, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
30 Apr 2009 |
| T0900055-v1 |
Rehang of the Quad NP with glass masses but metal wires (January 12-23 2009) |
Douglas Cook et al. |
Suspensions
|
29 Apr 2009 |
| D020324-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 2.5 DEGREES |
Michael Meyer |
Suspensions
Final Design
|
24 Apr 2009 |
| T070205-x0 |
OMC STRUCTURE SUMMARY (inc. FEA & EXPT results and weld tests) |
Calum Torrie |
Preliminary Design
Suspensions
|
25 Feb 2009 |
| D020307-v1 |
UPPER BLADE CLAMP, LOWER SIDE |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020321-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 0.5 DEGREES |
Michael Meyer |
Suspensions
Final Design
|
24 Apr 2009 |
| D020311-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 2.0 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020323-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 1.5 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020322-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 1.0 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020687-v1 |
Upper Blade Clamp, Lower Side, 3.0 Degree |
Derek Bridges |
Suspensions
Final Design
|
24 Apr 2009 |
| D020688-v1 |
Upper Blade Clamp, Lower Side, 3.5 Degree |
Derek Bridges |
Final Design
Suspensions
|
24 Apr 2009 |
| G040442-v1 |
Mode mismatch and sideband imbalance |
Hiro Yamamoto |
Modelling
Core Optics
|
23 Apr 2009 |
| D070031-v1 |
Lower Blade Clamp, Upper Side |
Derek Bridges |
Suspensions
Final Design
|
23 Apr 2009 |
| T040177-v1 |
Mode mismatch and sideband imbalance in LIGO I PRM |
Hiro Yamamoto |
Core Optics
Modelling
|
23 Apr 2009 |
| T080046-v1 |
UK Upper Intermediate Mass Driver Pre-Production Prototype Bench Test and Evaluation |
Vernon Sandberg et al. |
Preliminary Design
Suspensions
|
23 Apr 2009 |
| T0900170-v1 |
UK Top Driver Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner |
System Test
Suspensions
|
23 Apr 2009 |
| T0900161-v1 |
Coating Thermal Noise Formulas |
Gregg Harry |
Core Optics
|
23 Apr 2009 |
| G0900293-v3 |
Transmon sensitivity calculations |
Sam Waldman |
Sensing and Control
Conceptual Design
Auxiliary Optics
|
22 Apr 2009 |
| T0900156-v3 |
Reply to "OMC SUS FDR comments from reviewers" |
Norna Robertson et al. |
Final Design
Suspensions
Reviews
|
22 Apr 2009 |
| E0900108-v1 |
DCN for Glasgow Cantilever Drawing Old/Original |
Rand Dannenberg |
Core Optics
Basic R&D
|
20 Apr 2009 |
| T0900189-v1 |
Vibrational Transfer Function and the Sound Velocity in a Finite Elastic Body |
Keita Kawabe |
Suspensions
Basic R&D
|
20 Apr 2009 |
| G0900364-v1 |
Calibration of the LIGO detectors |
Gabriela Gonzalez |
Detector
Calibration
|
18 Apr 2009 |
| E0900100-v1 |
DCN to change D080748 & D080749 |
Janeen Romie |
Final Design
Suspensions
|
17 Apr 2009 |
| G0900358-v1 |
Thermal Compensation in LIGO |
Rupal Amin |
Core Optics
Auxiliary Optics
Modelling
|
17 Apr 2009 |
| C0900025-v1 |
LIGO Review of 'Compliance to LIGO Modifications on GS-13' |
Brian Lantz |
Seismic Isolation
Fabrication
|
26 Feb 2009 |
| T080325-v1 |
Earthquake Stop Scatter |
Michael Smith |
Final Design
Suspensions
Auxiliary Optics
|
16 Apr 2009 |
| G0900292-v2 |
BSC ISI Flexure Attachment Kick-Off Meeting |
Ken Mason |
Conceptual Design
Seismic Isolation
|
16 Apr 2009 |
| D0900637-v1 |
Self-Clinching Nut Test Assembly |
Derek Bridges |
Suspensions
Basic R&D
|
15 Apr 2009 |
| G0900141-v3 |
Performance of eLIGO Prototype HAM ISIs and improvements for aLIGO HAM ISIs |
Jeffrey Kissel |
Seismic Isolation
Commissioning
Upgrades
Modelling
Final Design
Requirements
|
13 Apr 2009 |
| D080708-v1 |
RF Source: Power Board |
Daniel Sigg |
Sensing and Control
|
13 Apr 2009 |
| D0900636-v1 |
Self-Clinching Nut Test Piece |
Derek Bridges |
Suspensions
Basic R&D
|
13 Apr 2009 |
| G070657-v1 |
Scattering Loss - talk at LSC meeting at Hannover, Oct. 2007 |
Hiro Yamamoto |
Modelling
Core Optics
|
07 Apr 2009 |
| E080446-v1 |
DCN - HAM Large Triple Suspension Structure |
Derek Bridges |
Fabrication
Suspensions
|
03 Apr 2009 |
| G080621-v1 |
The Status of Enhanced LIGO |
Aidan Brooks |
Seismic Isolation
Commissioning
|
02 Apr 2009 |
| D080497-v1 |
HEPI Pump Station Filter Braket Support Gusset |
Hugh Radkins et al. |
Final Design
Seismic Isolation
|
02 Apr 2009 |
| G050229-v1 |
FFT study of Mode matching at LHO and LLO |
Hiro Yamamoto |
Core Optics
Modelling
|
02 Apr 2009 |
| G0900275-v1 |
ISC Face 2 Face OMC lessons learned |
Sam Waldman |
Sensing and Control
Meeting
|
01 Apr 2009 |
| E0900043-v1 |
LHO HAM6 Incursion procedure - Feb 09 |
Michael Landry |
Sensing and Control
|
01 Apr 2009 |
| D020201-v1 |
HSTS Lower Blade |
Bobby Moore |
Suspensions
|
01 Apr 2009 |
| E0900097-v1 |
LHO HAM6 incursion procedure – Mar 09 |
Keita Kawabe et al. |
Sensing and Control
|
01 Apr 2009 |
| G0900270-v2 |
Optical Gyroscopes for Ground Tilt Sensing in Advanced LIGO |
Alastair Heptonstall |
Seismic Isolation
Meeting
|
01 Apr 2009 |
| L0900059-v1 |
Notes on the optomechanical layout meeting, 31-Mar-2009 |
Dennis Coyne |
System Engineering
Final Design
|
01 Apr 2009 |
| T0900127-v1 |
Thoughts for the VRB on Backfilling the ISI pods with Tracer Gasses |
Brian Lantz |
Seismic Isolation
Final Design
|
31 Mar 2009 |
| T0900120-v2 |
Dynamics of the Damper Suspension for the ETM Transmission Telescope/Monitor |
Dennis Coyne |
Auxiliary Optics
Conceptual Design
|
30 Mar 2009 |
| L0900058-v1 |
Request for waiver on glass shot blasted parts (BS/FM stay brackets) |
Dennis Coyne |
Suspensions
Final Design
|
29 Mar 2009 |
| M0900087-v1 |
All in vacuum cabling will be shielded |
Dennis Coyne |
System Engineering
Final Design
|
29 Mar 2009 |
| D0900559-x0 |
RF Distribution |
Daniel Sigg |
Sensing and Control
|
27 Mar 2009 |
| G0900183-v2 |
Variant of violin mode damping system for fused silica fiber suspension |
Valery Mitrofanov |
Suspensions
|
24 Mar 2009 |
| T960168-v1 |
Measurement of coating later thickness |
Hiro Yamamoto |
Core Optics
Modelling
|
24 Mar 2009 |
| D0900018-v1 |
RF Demodulator Front Panel |
Daniel Sigg |
Sensing and Control
|
24 Mar 2009 |
| E080529-v1 |
LIGO Aqueous Parts Washer |
Betsy Weaver |
Observatory Facilities
|
24 Mar 2009 |
| T050250-v1 |
Delay Line Phase Shifter |
Daniel Sigg |
Sensing and Control
|
23 Mar 2009 |
| G0900162-v3 |
Measurement of remanent dielectric polarization in fused silica and its application to investigation into cleaning with First Contact |
Valery Mitrofanov |
Core Optics
|
20 Mar 2009 |
| G0900232-v1 |
Status of the GEO squeezer |
Alexander Khalaidovski |
Auxiliary Optics
Laser Systems
|
19 Mar 2009 |
| G0900106-v1 |
HAM Suspensions Update - LSC/Virgo Collaborations Meeting, March 16-29, 2009 |
Derek Bridges |
Meeting
Suspensions
|
19 Mar 2009 |
| G0900252-v1 |
Damping struts at the Stanford ETF |
Brian Lantz |
Suspensions
Seismic Isolation
Basic R&D
|
19 Mar 2009 |
| D0900450-v2 |
Coating Mask for type B mechanical Q R&D Substrate |
Helena Armandula |
Core Optics
Basic R&D
|
18 Mar 2009 |
| G0900240-v1 |
Status of the squeezing experiment at ANU |
Conor Mow-Lowry |
Laser Systems
|
18 Mar 2009 |
| M0810012-v2 |
Advanced LIGO UK Project Management Meeting Number 51, Telecon Dec 2008 |
Justin Greenhalgh |
Project Controls
|
18 Mar 2009 |
| G0900215-v1 |
Advanced LIGO Arm Length Stabilization |
Bram Slagmolen |
Sensing and Control
Meeting
|
18 Mar 2009 |
| G0900199-v1 |
New Light Sources Working Group |
David McClelland |
Laser Systems
|
17 Mar 2009 |
| T080308-v1 |
IAS Conceptual Design Document |
Michael Smith |
Conceptual Design
Auxiliary Optics
|
17 Mar 2009 |
| G0900223-v1 |
ELIGO 35W PSL Report |
Anamaria Effler |
Laser Systems
|
17 Mar 2009 |
| T0900113-v1 |
Recent Investigations/Modifications on the ISS |
Hartmut Grote |
Commissioning
Laser Systems
|
17 Mar 2009 |
| D0900418-v1 |
Master/Fanout: RS485 Expansion Module |
Daniel Sigg |
Data Acquisition System
|
17 Mar 2009 |
| D0900417-v1 |
Master/Fanout: Test Expansion Module |
Daniel Sigg |
Data Acquisition System
|
17 Mar 2009 |
| T950008-v1 |
Muti thin layer coating modeling |
Hiro Yamamoto |
Modelling
Core Optics
|
17 Mar 2009 |
| D0900020-v1 |
RF Demodulator |
Daniel Sigg |
Sensing and Control
|
17 Mar 2009 |
| G0900127-v1 |
Collective dislocations movement and anomalous dissipation in Maraging blades |
Arianna Di Cintio |
Seismic Isolation
Basic R&D
|
17 Mar 2009 |
| T0900062-v1 |
OMC Suspension Final Design Review Checklist |
Janeen Romie |
Final Design
Suspensions
|
17 Mar 2009 |
| E080112-v1 |
Component Specification: ITM Penultimate Mass |
Russell Jones |
Suspensions
Final Design
Fabrication
|
16 Mar 2009 |
| E080090-v1 |
Component Specification: ETM Penultimate Mass |
Russell Jones |
Suspensions
Final Design
Fabrication
|
16 Mar 2009 |
| D080128-v1 |
Penultimate Mass, ITM Quad |
Russell Jones |
Suspensions
Final Design
Fabrication
|
16 Mar 2009 |
| D0900131-v1 |
Delay Line Phase Shifter Power Board |
Daniel Sigg |
Sensing and Control
|
16 Mar 2009 |
| D0900016-v1 |
FETIQDEMOD Power Board |
Daniel Sigg et al. |
Sensing and Control
|
16 Mar 2009 |
| M080371-v1 |
RODA: Arm Length Stabilization system to use end-station injection of a 532 nm beam, and PDH cavity sensing. |
Peter Fritschel |
System Engineering
|
16 Mar 2009 |
| E0900029-v1 |
H1 HAM4 97/3 BS Installation |
Michael Landry |
Auxiliary Optics
|
16 Mar 2009 |
| G0900137-v1 |
Optimisation of the ISS |
Hartmut Grote |
Commissioning
Laser Systems
|
16 Mar 2009 |
| M080034-v1 |
Magnet Swap Review for Enhanced LIGO |
Norna Robertson |
Suspensions
Reviews
Upgrades
|
13 Mar 2009 |
| E040136-v1 |
Seismic Isolation System (SEI) Payload Mass Properties |
Dennis Coyne |
Seismic Isolation
System Engineering
Final Design
|
13 Mar 2009 |
| T070035-v1 |
UK Coil Driver Reviewer Comments Summary |
Vernon Sandberg et al. |
Suspensions
Conceptual Design
|
13 Mar 2009 |
| G0900030-v1 |
Status of Ground Based Interferometers |
Gabriela Gonzalez |
Detector
|
13 Mar 2009 |
| E080531-v1 |
SPECIFICATION - Convection Oven for AdLIGO Parts Baking Vacuum Chamber |
Kyle Ryan |
Vacuum
|
13 Mar 2009 |
| E0900075-v1 |
Response to HAM-ISI Watchdog Committee Recommendations |
Jeffrey Kissel et al. |
Commissioning
Seismic Isolation
|
09 Mar 2009 |
| P0900025-v1 |
Experimental demonstration of a suspended diffractively-coupled optical cavity |
Matthew Edgar |
Detector
|
09 Mar 2009 |
| D030243-v2 |
Cu Damper 2x2 Array Stripped |
Calum Torrie |
Suspensions
Basic R&D
|
06 Mar 2009 |
| D030215-v3 |
Eddy Current Magnet Holder |
Calum Torrie |
Suspensions
Basic R&D
|
06 Mar 2009 |
| D080498-v1 |
HEPI Pump Station Valve to Filter Assembly |
Hugh Radkins |
Final Design
Seismic Isolation
|
06 Mar 2009 |
| D070048-v1 |
EQ Stop Bracket |
Janeen Romie |
Suspensions
|
06 Mar 2009 |
| D070050-v1 |
EQ Bracket Bottom |
Janeen Romie |
Suspensions
|
06 Mar 2009 |
| L0900002-v1 |
VRB request: all SmCo magnets UHV compatible? |
Dennis Coyne |
Requirements
System Engineering
|
06 Mar 2009 |
| D0900306-x0 |
Timing IRIG-B Rear PCB Auxiliary |
Daniel Sigg |
Data Acquisition System
|
05 Mar 2009 |
| T080059-v1 |
Tilt tests on the RAL noise prototype – part 2 |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080056-v1 |
Application of hysteresis model to quad SUS |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080044-v1 |
Tests with single two-wire pendulum – part two |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080033-v1 |
Tests with single two-wire pendulum |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080030-v1 |
TILT TESTS ON RAL NOISE PROTOTYPE |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080028-v1 |
Lateral blade movement in clamps Experiment |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080111-v1 |
UK Satellite Amplifier Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner et al. |
Suspensions
System Test
|
02 Mar 2009 |
| E0900036-v1 |
Diagnostics Information for the Advanced LIGO Optical Timing Distribution System |
Daniel Sigg et al. |
Data Acquisition System
|
02 Mar 2009 |
| E080172-v1 |
DCN: ETM and ITM Quad Penultimate Mass drawings and specifications |
Russell Jones |
Change Control
Final Design
Suspensions
|
02 Mar 2009 |
| E080171-v1 |
DCN: ALIGO SUS ETM QUAD End Reaction Mass (ERM) Drawing & Specification |
Russell Jones |
Change Control
Suspensions
Final Design
|
02 Mar 2009 |
| E080089-v1 |
Component Specification: ETM QUAD End Reaction Mass (ERM) |
Russell Jones |
Suspensions
Final Design
|
02 Mar 2009 |
| D070375-v1 |
FET IQ Demodulator |
Paul Schwinberg |
Sensing and Control
|
02 Mar 2009 |
| D0900339-v1 |
Enhanced LIGO OMC SUS Signal Flow Diagram |
Jay Heefner |
Final Design
Suspensions
|
02 Mar 2009 |
| T080048-v2 |
The Review of Production Drawings for the ALIGO ETM Quad End Reaction Mass: Support Notes |
Ken Strain et al. |
Final Design
System Test
Suspensions
|
27 Feb 2009 |
| D0900135-v1 |
Delay Line Phase Shifter Rear Panel (double) |
Daniel Sigg |
Sensing and Control
|
27 Feb 2009 |
| D0900134-v1 |
Delay Line Phase Shifter Front Panel (double) |
Daniel Sigg |
Sensing and Control
|
27 Feb 2009 |
| D0900130-v1 |
Delay Line Phase Shifter Rear Panel |
Daniel Sigg |
Sensing and Control
|
27 Feb 2009 |
| D0900129-v1 |
Delay Line Phase Shifter Front Panel |
Daniel Sigg |
Sensing and Control
|
27 Feb 2009 |
| L0900024-v1 |
VRB response to nickel-phosphorous plating issues. |
John Worden |
Vacuum
|
26 Feb 2009 |
| D0900019-v1 |
RF Demodulator Rear Panel |
Daniel Sigg |
Sensing and Control
|
26 Feb 2009 |
| D0900316-v1 |
ELIGO ISI and OMC SUS Controls Block Diagram |
Jay Heefner et al. |
Suspensions
Final Design
Seismic Isolation
|
25 Feb 2009 |
| D070569-v1 |
ELIGO OMC SUS Wiring |
Jay Heefner |
Suspensions
Installation
|
25 Feb 2009 |
| G080321-v1 |
Another Satellite Amplifier |
Jay Heefner |
Requirements
Suspensions
|
25 Feb 2009 |
| D070070-v1 |
Wire Clamp for Optical Bench, OMC |
Calum Torrie |
Basic R&D
Suspensions
|
24 Feb 2009 |
| T0900033-v1 |
Discussion about losses in the perpendicular and parallel directions |
Kentaro Somiya |
Core Optics
Modelling
|
24 Feb 2009 |
| D0900311-x0 |
Signal Breakout Circuit Board |
Rich Abbott |
Upgrades
Sensing and Control
|
24 Feb 2009 |
| T080277-v1 |
BS, CP, RM, ITM and ETM Wedge Angle Tolerance |
Michael Smith |
Core Optics
|
24 Feb 2009 |
| T0810032-v1 |
ETM Transmon Pupil Relay |
Michael Smith |
Sensing and Control
Conceptual Design
Auxiliary Optics
|
24 Feb 2009 |
| T0900026-v1 |
Initial Results from PNNL Scanning Electron microscope ITM witness sample |
Cheryl Vorvick |
Core Optics
Basic R&D
|
24 Feb 2009 |
| T0900014-v2 |
UK UIM Coil Driver Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner et al. |
Suspensions
System Test
|
24 Feb 2009 |
| E080515-v2 |
E080515 Polishing specification for Advanced LIGO FM |
Mick Flanigan |
Core Optics
Final Design
|
23 Feb 2009 |
| E080514-v2 |
E080514_BS_Polishing_Specification |
Mick Flanigan |
Core Optics
Final Design
|
23 Feb 2009 |
| E080513-v2 |
E080513_CP_Polishing_Specification |
Mick Flanigan |
Core Optics
Final Design
|
23 Feb 2009 |
| T080326-v1 |
A Strategy to Prove and Provide Monolithic Suspensions |
Giles Hammond et al. |
Suspensions
|
20 Feb 2009 |
| M0900025-v1 |
RODA: Decision to reduce the beam size on the ITMs to 5.3 cm |
Peter Fritschel |
System Engineering
Activity
|
16 Feb 2009 |
| T0900061-v1 |
Collection of Reports on Barkhausen Noise |
Rainer Weiss |
Basic R&D
Suspensions
|
14 Feb 2009 |
| D0900007-v1 |
Base Shim for 40-m Tip-Tilt Assy |
Michael Meyer |
Suspensions
|
03 Feb 2009 |
| T0900011-v5 |
The HAM ISI Watchdog |
Jeffrey Kissel |
Seismic Isolation
|
30 Jan 2009 |
| G0810029-v4 |
Beam Size Effect on Signal Loss |
Hiro Yamamoto |
Core Optics
|
27 Jan 2009 |
| T0810042-v1 |
HAM ISI modeling abstract |
Brian Lantz |
Modelling
Seismic Isolation
|
27 Jan 2009 |
| T0810007-v2 |
Effect of ITM thermal lens in beam reflection |
Hiro Yamamoto |
Auxiliary Optics
Commissioning
|
27 Jan 2009 |
| D020475-v1 |
SUS SMALLTRIPLE 2x2ARRARY (ECD) 2x2copperarray |
Calum Torrie |
Suspensions
Basic R&D
|
23 Jan 2009 |
| D030735-v1 |
SUS_SMALLTRIPLE_2x2ARRARY_ECD_MACHINED HEX IN SHCS_SUB-ASSEMBLY |
Calum Torrie |
Suspensions
Basic R&D
|
23 Jan 2009 |
| D080519-v1 |
HEPI Pump Station Filter Bracket Assembly |
Hugh Radkins et al. |
Seismic Isolation
Final Design
|
23 Jan 2009 |
| L080044-v1 |
In response to L080042-00, Is 303 stainless steel acceptable in the LIGO Vacuum system? |
John Worden |
Vacuum
|
15 Jan 2009 |
| E0900004-x0 |
DCN Passive Tip-Tilt Base Shim for 40-M Lab |
Michael Meyer |
Suspensions
|
15 Jan 2009 |
| E080530-v1 |
DCN for Advanced LIGO Polishing |
GariLynn Billingsley |
Core Optics
|
05 Jan 2009 |
| L0810022-v1 |
epoxy resin for Violin Mode (VM) dampers |
Dennis Coyne |
Letters
Final Design
Suspensions
|
16 Dec 2008 |