Altiumcustomize

Design Rule Verification Report

Date : 7/2/2014
Time : 4:57:19 PM
Elapsed Time : 00:00:00
Filename : C:\Rich's Files\Mycadfiles\ISC\FastShutterPulser\Discharge Board\Discharge.PcbDoc
Warnings : 0
Rule Violations : 2

Summary

Warnings Count
Total 0

Rule Violations Count
Room HV_Discharge (Bounding Region = (12050mil, 11300mil, 12200mil, 11565mil) (Disabled)(InComponentClass('HV_Discharge')) 0
Net Antennae (Tolerance=0mil) (All) 0
Silk to Silk (Clearance=10mil) (All),(All) 0
Silkscreen Over Component Pads (Clearance=7mil) (All),(All) 2
Minimum Solder Mask Sliver (Gap=10mil) (All),(All) 0
Hole To Hole Clearance (Gap=10mil) (All),(All) 0
Hole Size Constraint (Min=14mil) (Max=200mil) (All) 0
Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) 0
Width Constraint (Min=10mil) (Max=100mil) (Preferred=40mil) (All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All) 0
Clearance Constraint (Gap=10mil) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Total 2

Silkscreen Over Component Pads (Clearance=7mil) (All),(All)
Track (2125mil,35mil)(2125mil,195mil) Top Overlay Pad R1-2(2190mil,115mil) Top Layer
Track (2515mil,35mil)(2515mil,195mil) Top Overlay Pad R1-1(2450mil,115mil) Top Layer
Back to top