LIGO Document D1200794-v3

EOM Driver Circuit

Document #:
LIGO-D1200794-v3
Document type:
D - Drawings
Other Versions:
LIGO-D1200794-v1
31 May 2012, 11:15
Abstract:
A small (1.2" X 1.75") high gain resonant EOM driver circuit useful for applying up to 30 volts peak to peak across a low capacitance (tens of pf) EOM. Features a 50 ohm source impedance and has been measured to provide 29.8Vp-p output for a 0.19Vp-p input at an RF frequency of 20.9MHz. Circuit should work into the tens of MHz. A monitor of the RF drive is buffered and available on a dedicated connector.
Files in Document:
Other Files:
Authors:
Keywords:
EOM
Notes and Changes:
Present version of board and schematic is revision 3. This revision incorporates some minor changes to the monitoring circuit and the power connector.
Referenced by:

DCC Version 3.5.0, contact DCC Help