aLIGO Pcal, Receiver Mounting Block

Document #:

LIGO-D1300499-v2

Document type:

D - Drawings

Abstract:

Attached to the Pcal Receiver Pylon by epoxy bond or weld, quantity 3 in a triangular pattern. Receiver breadboard mounts to the pattern at three points by push-pull screws.

Files in Document:

• D1300499-v2 aLIGO Pcal, Receiver Mounting Block.PDF (55.5 kB)

ICS/JIRA Record:

• d1300499

Topics:

• Auxiliary Optics

Authors:

• Richard Savage
• Craig Conley

Keywords:

Pcal Receiver Mounting Block

Notes and Changes:

Increased thickness -FROM- .56 -TO- .63

Decreased length -FROM- 1.30 -TO- 1.25

Changed tapped thru hole -FROM- 3/8-16 UNC-2B -TO- 1/4-20 UNC-2B

Referenced by:

• LIGO-E1300594-v1: ECR- Modification of Oplev/Pcal Receiver Pylon Weldments
• LIGO-E1300593-v2: aLIGO Installation Procedure- Pcal Receiver Mounting Blocks
• LIGO-D1001292-v2: aLIGO AOS OpLev & Pcal RX Pier Weldment LH
• LIGO-D1001297-v2: aLIGO AOS OpLev & Pcal RX Pier Weldment RH