LIGO Document G1700301-v1

Errors on the Cryogenic Mechanical Loss Measurement in Cantilever Ring-down Method

Document #:
Document type:
G - Presentations (eg Graphics)
Other Versions:
We report here, based on our repeated measurements on various kind of thin film samples on silicon cantilevers, error patterns of cryogenic mechanical loss measurement in cantilever ring-down method from 10K to room temperature. We found that the measured cryogenic loss is highly repeatable with temperature re-cycling from 10K to room temperature. While on re-clamping, the measured loss is highly repeatable from 10K to ~100K, but less repeatable at elevated temperature; non-repeatable loss peaks appear with different clamping at the elevated temperature[1]. With careful alignment during the sample-clamp assembling process, problem improved. Re-clamping with careful alignment is necessary to ensure that the peaks presented in the temperature range above ~100K are real.
Associated with Events:
held from 13 Mar 2017 to 16 Mar 2017 in Pasadena, California USA

DCC Version 3.3.0, contact Document Database Administrators