LIGO Document P1100166-v4
- We present results of finite element analysis simulations which could lead to more accurate calibration of interferometric gravitational wave detectors. Calibration and actuation forces applied to the interferometer test masses cause elastic deformation inducing errors in the calibration. These errors increase with actuation frequency, and can be greater than 50% at frequencies above a few kHz. We show that they can be reduced significantly by changing the position at which the forces are applied. The Advanced LIGO  photon calibrators use a two-beam configuration to reduce the impact of local deformations of the test mass surface. The beam positions can be chosen such both the local and the bulk induced elastic deformation are minimized. Our finite element modeling indicates that with two beams located within ±1mm of their designated locations, calibration errors due to test mass elastic deformation can be kept below 1% for frequencies up to 3.5 kHz. We thus show that precise control of the location of calibration forces could considerably improve calibration accuracy, especially at high frequencies.
- held on 10 Jul 2011 in Cardiff, July 10-15
DCC Version 3.3.0, contact
Document Database Administrators