Bracket, Wire, Fast Shutter, HAM6

Document #:

LIGO-D1300972-v2

Document type:

D - Drawings

Abstract:

This is a small PEEK bracket which snaps into the bobbin of the fast shutter. It is used to support the wires at the soldered joint between the coil wire and the flex wire.

Files in Document:

• D1300972-v2.PDF (55.6 kB)

ICS/JIRA Record:

• ICS_LINK

Topics:

• Sensing and Control

Authors:

• Jeffrey Lewis

Keywords:

bobbin peek joint bracket

Notes and Changes:

Zone C/6: Updated bracket width, was: .180

Referenced by:

• LIGO-D1003319-v4: BOBBIN-COIL Assembly, ISC, aLIGO