DCN - HLTS Wire Jigs - Production Version

Document #:

LIGO-E1100057-x0

Document type:

E - Engineering documents

Abstract:

This is a Document Change Notice (DCN) for production versions of the HLTS Wire Jig part and assembly drawings.

Files in Document:

None

Topics:

• Suspensions
• Change Control
• Final Design

Authors:

• Derek Bridges

Keywords:

DCN SUS HLTS wire jig

Notes and Changes:

Upper Wire Jig:
D0900594-v2: Revised to separate wire clamping from attachment to Base Plate.
D0900595-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900596-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900597-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900603-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D020380-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D980184-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).

Intermediate Wire Jig:
D0900630-v2: Revised to separate wire clamping from attachment to Base Plate. Resized Wire Clamp Mount to accomodate correct lengths of helicoils.
D0900633-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900631-v2: Added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900632-v2: Resized to accomodate correct lengths of helicoils and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0900634-v2: Revised to separate wire clamping from attachment to Base Plate. Added additional notes (all surfaces must be machined, refer to metal component spec.).

Lower Loop Wire Jig:
D0901419-v2: Revised to separate wire clamping from attachment to Base Plate.
D0901433-v2: Revised to separate wire clamping from attachment to Base Plate and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0901435-v3: Revised to separate wire clamping from attachment to Base Plate and added additional notes (all surfaces must be machined, refer to metal component spec.).
D0901436-v2: Added additional notes (all surfaces must be machined, refer to metal component spec., helicoil holes).

Prism Gluing Test Mass:
D1100246-v1: Initial release of simplified Metal Bottom Mass for use in testing the Sapphire Prism Bonding Jig and for practice in gluing sapphire prisms to optics.

Related Documents:

• LIGO-D0900594-v2: Upper Wire Jig Assembly, HLTS
• LIGO-D0900595-v2: Base Plate, Upper Wire Jig, HLTS
• LIGO-D0900596-v2: Blade Clamp Mount, Upper Wire Jig, HLTS
• LIGO-D0900597-v2: Wire Clamp Mount, Upper Wire Jig, HLTS
• LIGO-D0900603-v2: Wire Start Clamp, Inside, Upper Wire Jig, HLTS
• LIGO-D020380-v2: Wire Start Clamp, Outside
• LIGO-D980184-v2: LOS Clamp, Long
• LIGO-D0900630-v2: Intermediate Wire Jig Assembly, HLTS
• LIGO-D0900633-v2: Base Plate, Intermediate Wire Jig, HLTS
• LIGO-D0900631-v2: Blade Clamp Mount, Intermediate Wire Jig, HLTS
• LIGO-D0900632-v2: Wire Clamp Mount, Intermediate Wire Jig, HLTS
• LIGO-D0900634-v2: Wire Start Clamp, Inside, Intermediate Wire Jig, HLTS
• LIGO-D0901419-v2: Lower Loop Wire Jig Assembly (HLTS)
• LIGO-D0901433-v2: Base Plate, Lower Loop Wire Jig, HLTS
• LIGO-D0901435-v3: Wire Start Clamp, Inside, Lower Loop Wire Jig, HLTS
• LIGO-D0901436-v2: Wire Clamp Mount, Lower Loop Wire Jig, HLTS
• LIGO-D1100246-v1: Prism Gluing Test Mass, HLTS