| LIGO-Number |
Title |
Author(s) |
Topic(s) |
Last Updated |
| D060218-v2 |
BOSEM |
Betsy Weaver et al. |
Suspensions
Preliminary Design
|
28 Jul 2020 |
| D070441-v6 |
HLTS Prism Breakoff, Lower Wire, Optic |
Calum Torrie et al. |
Suspensions
Final Design
|
14 Nov 2023 |
| D0810033-v4 |
HSTS LOWER MASS PRIMARY PRISM |
Calum Torrie |
Suspensions
Final Design
|
14 Nov 2023 |
| D080751-v4 |
Advanced LIGO, Suspension, ETM/ITM Test Mass, Production ear |
Marielle van Veggel |
Suspensions
Final Design
|
28 Sep 2023 |
| D060386-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MOUNT BLOCK, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| D060546-v1 |
Impact Absorber for Glass Stops, Earthquake Stop |
Derek Bridges |
Suspensions
Preliminary Design
|
15 May 2009 |
| D070081-v6 |
AdL AA and AI Filter Board (65 kHz) |
Jay Heefner |
Data Acquisition System
|
11 Nov 2022 |
| T0900140-v1 |
AdL Triple Acquisition Driver Board Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
19 Aug 2009 |
| D080276-v2 |
aLIGO (US, ISC) 4 Channel Satellite Amplifier Circuit Board (Amp, SatAmp) |
Jay Heefner |
Final Design
Suspensions
|
04 Feb 2021 |
| D080117-v1 |
Penultimate Mass, ETM Quad |
Russell Jones |
Suspensions
Final Design
Fabrication
|
14 Feb 2020 |
| D0900906-v1 |
Earthquake Stop Adjuster and Mount, 2 Inch |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Oct 2019 |
| T040027-v2 |
Conceptual Design of Beamsplitter Suspension for aLIGO |
Norna Robertson et al. |
Suspensions
Conceptual Design
|
14 Mar 2019 |
| T0900083-v1 |
Modeling Cable Noise in LIGO |
Julian Earl Freed-Brown et al. |
Final Design
Modelling
Suspensions
|
16 Oct 2018 |
| D060454-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE |
Joe ODell |
Suspensions
|
30 Mar 2018 |
| D060353-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, Pen Re Pitch Mass |
Joe ODell |
Suspensions
|
31 Jan 2018 |
| D090007-v4 |
Advanced LIGO, Suspension, ETM/ITM Quad PM, Production Ear with Recess |
Marielle van Veggel |
Suspensions
Final Design
|
14 Apr 2016 |
| D060341-v11 |
ADVANCED LIGO, SUS, QUAD, PENULTIMATE REACTION MASS, ETM AND ITM CONFIGURATION |
Joe ODell et al. |
Suspensions
|
13 Apr 2016 |
| D080166-v9 |
aLIGO, SUS, PENRE QUAD, OSEM CAN ETM / ITM |
Joe ODell et al. |
Suspensions
|
06 Apr 2016 |
| D060375-v7 |
Advanced LIGO, SUS, Quad N-Ptype, UI MASS Main and Reaction Assembly Drawing and Process |
Joe ODell et al. |
Suspensions
|
29 Mar 2016 |
| D060388-v4 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BRACKET UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
11 Jan 2016 |
| D080116-v2 |
End Reaction Mass (ERM) |
Russell Jones |
Suspensions
Final Design
|
02 Sep 2015 |
| D060461-v2 |
QUAD LOWER STRUCTURE, PEN TEST MASS PAD |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060457-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY SHORT |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060455-v2 |
QUAD LOWER STRUCTURE X-BRACE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060446-v2 |
QUAD LOWER STRUCTURE, ADJUSTABLE PAD ASSEMBLY, LONG |
Joe ODell |
Suspensions
|
26 May 2015 |
| D060434-v2 |
SUS QUAD OUTER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 May 2015 |
| D080090-v3 |
ADVANCED LIGO, SUS, BLADE TIP STOP MOUNT, BS TOP STAGE |
Joe ODell et al. |
Suspensions
|
20 Apr 2015 |
| D070140-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, top stage blade wire clamp shim |
Joe ODell et al. |
Fabrication
Final Design
Suspensions
|
18 Dec 2014 |
| D080168-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD , CAN BODY, ETM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
20 Nov 2014 |
| D060403-v8 |
Advanced LIGO, SUS, Quad Top Mass, TOP MASS - Main and Reaction Assembly Drawing |
Joe ODell et al. |
Suspensions
|
18 Nov 2014 |
| D060335-v4 |
Advanced LIGO, SUS, TOP MASS Quad N-Ptype, RECESSED 1/4" 20 UNC X 0.75" CAP HEAD |
Joe ODell et al. |
Suspensions
|
12 Aug 2014 |
| T010007-v5 |
Cavity Optics Suspension Subsystem Design Requirements |
Mark Barton et al. |
Requirements
Suspensions
|
17 May 2014 |
| D060409-v4 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM ECD UNIT |
Joe ODell |
Suspensions
|
30 Apr 2014 |
| D080005-v4 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER TRIPLE, BS LOWER STRUCTURE |
Joe ODell |
Suspensions
|
22 Apr 2014 |
| D060422-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070234-v4 |
Advanced LIGO, SUS, Penultimate Mass, Pen Re Mass Magnets (External Shielded Magnets) |
Joe ODell et al. |
Suspensions
|
11 Mar 2014 |
| D070237-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Base (External Shielded Magnets) |
Joe ODell |
Suspensions
|
05 Mar 2014 |
| D060355-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Mass Assembly |
Joe ODell |
Suspensions
|
18 Feb 2014 |
| T070189-v3 |
Design Specifications for the OMC Suspension |
Norna Robertson et al. |
Suspensions
Requirements
|
07 Feb 2014 |
| D070220-v5 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp |
Joe ODell et al. |
Suspensions
Final Design
Fabrication
Installation
|
06 Feb 2014 |
| D060394-v3 |
SPACER UI MAGNET AND FLAG, aLIGO SUS |
Joe ODell et al. |
Final Design
Suspensions
|
18 Dec 2013 |
| D060337-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, PENULTIMATE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D070539-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Reaction Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| T0900080-v1 |
OMC Suspension Advanced LIGO Test Plan |
Norna Robertson et al. |
System Test
Suspensions
|
06 Sep 2013 |
| D060323-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM POSITION ADJUSTMENT PLATE |
Joe ODell et al. |
Suspensions
Final Design
|
23 Aug 2013 |
| D060329-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, Top Stage STIFF BACK |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060356-v2 |
Advanced LIGO, SUS, Quad N-Ptype, Dummy Test Reaction Mass Assembly Tooling |
Joe ODell |
Suspensions
|
05 Aug 2013 |
| D070247-v3 |
Advanced LIGO, SUS, Quad ITM/ETM, Tablecloth Pads (Upper Structure) |
Joe ODell et al. |
Auxiliary Optics
Final Design
|
17 Jul 2013 |
| D070222-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Cable Clamp |
Joe ODell |
Suspensions
|
05 Sep 2012 |
| D080240-v2 |
Adv LIGO, ALIGO Quad, THIS, PEN RE MASS BUMP STOP ASSEMBLY, PENULTIMATE REACTION MASS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D060349-v3 |
Advanced LIGO, SUS, N-Ptype PENULTIMATE MASS, LIGO 1 OSEM MOUNT (FOR PENRE MASS) |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060352-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, PITCH MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060332-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP TOP STAGE |
Joe ODell |
Suspensions
|
08 Jul 2013 |
| D060316-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD ADJUSTER |
Joe ODell |
Suspensions
|
31 Mar 2011 |
| D060320-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM ADJUSTMENT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060322-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TRANSVERSE OSEM ADJUSTER |
Joe ODell |
Final Design
Suspensions
|
29 Sep 2010 |
| D060310-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, Tablecloth (Noise Prototype) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060324-v5 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CARTRIDGE Assembly |
Joe ODell |
Suspensions
|
03 Jul 2013 |
| D060392-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MAGNET RETAINER (MODIFIED 1/4-20 HEX HEAD SCREW 15" LONG) |
Joe ODell |
Suspensions
|
10 Aug 2009 |
| D060393-v1 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS MAGNET AND FLAG MOUNT |
Joe ODell |
Suspensions
|
17 Aug 2009 |
| D020133-v1 |
Lower Blade Wire Clamp Plate (OMCS) |
Derek Bridges |
Final Design
Suspensions
|
28 May 2013 |
| D020132-v2 |
Lower Blade Wire Clamp (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D070020-v2 |
Magnet Holder (OMCS) |
Derek Bridges |
Suspensions
Preliminary Design
|
28 May 2013 |
| D060491-v2 |
Main Section, Upper Mass (OMCS) |
Derek Bridges |
Suspensions
Final Design
|
28 May 2013 |
| D070022-v1 |
Wire Clamp, Top Blade (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D020139-v1 |
Wire Clamp Plate, Upper Mass (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D020309-v1 |
Wire Clamp Plate with Groove, Upper Mass (OMCS) |
Michael Meyer |
Suspensions
Final Design
|
28 May 2013 |
| D070030-v1 |
C-Clamp for Top Wire (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D030042-v1 |
Wire Clamp Plate, Upper Blade (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
28 May 2013 |
| D030450-v2 |
Pull Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
28 May 2013 |
| D030449-v2 |
Push Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
28 May 2013 |
| D030447-v2 |
Rotating Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D030448-v3 |
Base Plate, Rotational Adjuster (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
28 May 2013 |
| D020336-v2 |
Lower Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020313-v2 |
Lower Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020335-v2 |
Lower Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020334-v2 |
Lower Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020333-v2 |
Lower Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020308-v2 |
Lower Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Derek Bridges |
Final Design
Suspensions
|
22 May 2013 |
| D020340-v2 |
Lower Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020314-v2 |
Lower Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020339-v2 |
Lower Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020338-v2 |
Lower Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020337-v2 |
Lower Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020119-v2 |
Lower Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020680-v2 |
Upper Blade Clamp Shim, 2mm (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D020679-v2 |
Upper Blade Clamp Shim, 1mm (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030466-v2 |
Upper Blade Clamp, Lower Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030465-v2 |
Upper Blade Clamp, Lower Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030463-v2 |
Upper Blade Clamp, Lower Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030462-v2 |
Upper Blade Clamp, Lower Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030461-v2 |
Upper Blade Clamp, Lower Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030460-v2 |
Upper Blade Clamp, Lower Side, 0.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D030459-v3 |
Upper Blade Clamp, Lower Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
22 May 2013 |
| D030464-v2 |
Upper Blade Clamp, Lower Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
22 May 2013 |
| D020690-v2 |
Upper Blade Clamp, Upper Side, 3.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020689-v2 |
Upper Blade Clamp, Upper Side, 3.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D020328-v2 |
Upper Blade Clamp, Upper Side, 2.5 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D020312-v2 |
Upper Blade Clamp, Upper Side, 2.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020327-v2 |
Upper Blade Clamp, Upper Side, 1.5 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D020326-v2 |
Upper Blade Clamp, Upper Side, 1.0 Degree (HSTS/OMCS) |
Bobby Moore |
Final Design
Suspensions
|
21 May 2013 |
| D020325-v2 |
Upper Blade Clamp, Upper Side, 0.5 Degree (HSTS/OMCS) |
Michael Meyer |
Final Design
Suspensions
|
21 May 2013 |
| D020116-v2 |
Upper Blade Clamp, Upper Side, 0.0 Degree (HSTS/OMCS) |
Bobby Moore |
Suspensions
Final Design
|
21 May 2013 |
| D070035-v4 |
Metal Bench Assembly (OMCS) |
Derek Bridges |
Suspensions
Sensing and Control
|
14 May 2013 |
| D060537-v4 |
Lower Wire Assembly (OMCS) |
Derek Bridges |
Suspensions
|
14 May 2013 |
| D060536-v1 |
Upper Wire Assembly (OMCS) |
Christopher Echols |
Suspensions
|
14 May 2013 |
| D030451-v2 |
Rotational Adjuster Assembly (OMCS) |
Derek Bridges |
Final Design
Suspensions
|
14 May 2013 |
| D070219-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp Base |
Joe ODell et al. |
Suspensions
|
29 Apr 2013 |
| D070250-v4 |
Base Plate, Lower Wire Jig (OMCS) |
Derek Bridges |
Final Design
Suspensions
|
17 Apr 2013 |
| D020677-v3 |
Library of Clamps (HSTS/OMCS) |
Michael Meyer |
Suspensions
Final Design
|
17 Apr 2013 |
| D070139-v1 |
Upper Wire Jig Assembly (OMCS) |
Michael Meyer |
Final Design
Suspensions
|
17 Apr 2013 |
| D0900308-v4 |
Structural Weldment (OMCS) |
Michael Meyer et al. |
Final Design
Suspensions
|
16 Apr 2013 |
| D070538-v2 |
Advanced LIGO, SUS, Quad ITM/ETM, Implementation Ring Test Chain |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060460-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (SHORT) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060459-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, SHORT |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060458-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
07 Jan 2013 |
| D060492-v4 |
Advanced LIGO, SUS, Quad ETM/ITM, Upper Structure Weldment |
Joe ODell |
Suspensions
Final Design
|
18 Dec 2012 |
| D060348-v3 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, OSEM TRANSLATION PLATE, ETM PEN RE MASS CAN |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060351-v3 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, BASE PLATE, LIGO 1 OSEM MOUNT |
Joe ODell et al. |
Suspensions
|
12 Nov 2012 |
| D060410-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
12 Oct 2012 |
| D070337-v8 |
Bottom Mass Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
09 Oct 2012 |
| D080241-v2 |
Adv. LIGO, SUS, Earthquake Stop Assembly |
Joe ODell |
Suspensions
Final Design
|
10 Sep 2012 |
| D070217-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D070214-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Top Ring Wire Clamp |
Joe ODell |
Suspensions
|
09 Sep 2012 |
| D060475-v4 |
ADVANCED LIGO, SUS, EARTHQUAKE-STOP MOUNTS-LONG, LOWER STRUCTURE |
Joe ODell et al. |
Suspensions
Final Design
|
09 Sep 2012 |
| D060390-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI Mass, Wire Clamp Body Top Wire |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070225-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Wire Clamp |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D070221-v3 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, UIM Mass Top Wire Clamp Assy. |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D070218-v3 |
ALIGO, SUS, Quad, Wiring Harness, Mass Wire Clamp |
Joe ODell et al. |
Final Design
Fabrication
|
07 Sep 2012 |
| D060336-v4 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, 2MM CAM, OSEM ADJUSTER |
Joe ODell et al. |
Suspensions
Final Design
|
07 Sep 2012 |
| D060389-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, ADJUSTER UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D060387-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS OSEM MOUNT |
Joe ODell |
Suspensions
|
07 Sep 2012 |
| D080163-v1 |
Advanced LIGO, SUS, Output Mode Cleaner, OMC Crossbar Assembly |
Michael Meyer |
Suspensions
|
27 Aug 2012 |
| T070304-v1 |
Vibration Transmission to OMC Bench via Cabling |
Norna Robertson |
Modelling
Suspensions
|
08 Aug 2012 |
| D030078-v2 |
Add-on Mass, 20g |
Michael Meyer |
Final Design
Suspensions
|
21 Jun 2012 |
| D020351-v2 |
Add-on Mass, 50g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| D020350-v3 |
Add-on Mass, 100g |
Michael Meyer |
Suspensions
Final Design
|
21 Jun 2012 |
| D0902025-v3 |
Upper AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
04 Jun 2012 |
| D0901493-v3 |
Lower AOSEM Mounting Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
04 Jun 2012 |
| D070442-v7 |
Structural Weldment, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
29 May 2012 |
| D060426-v3 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, UI MASS WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
03 May 2012 |
| D070056-v2 |
Advanced LIGO, SUS, Quad N-PType, Quad Dog Clamp |
Joe ODell |
Final Design
Suspensions
|
25 Apr 2012 |
| T080266-v1 |
Suspending optics on steel wire loops |
Norna Robertson et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| D080761-v4 |
Lower Blade, HSTS |
Bobby Moore et al. |
Final Design
Suspensions
|
08 Apr 2012 |
| D070321-v2 |
Earthquake Stop Bridge Crossbar, HLTS |
Derek Bridges |
Final Design
Suspensions
|
02 Apr 2012 |
| D0901419-v2 |
Lower Loop Wire Jig Assembly (HLTS) |
Derek Bridges |
Suspensions
Final Design
|
27 Mar 2012 |
| D0900689-v2 |
Base Plate, Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
24 Mar 2012 |
| D0900680-v2 |
Blade Clamp (3.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900679-v2 |
Blade Clamp (3.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
22 Mar 2012 |
| D0900678-v2 |
Blade Clamp (2.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900677-v2 |
Blade Clamp (2.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900676-v2 |
Blade Clamp (1.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900675-v2 |
Blade Clamp (1.0 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900674-v2 |
Blade Clamp (0.5 Degree), Upper Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
22 Mar 2012 |
| D0900673-v3 |
Blade Clamp (3.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900672-v3 |
Blade Clamp (3.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900671-v3 |
Blade Clamp (2.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900670-v3 |
Blade Clamp (2.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900669-v3 |
Blade Clamp (1.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900668-v3 |
Blade Clamp (1.0 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D0900667-v3 |
Blade Clamp (0.5 Degree), Upper Blade, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D0900665-v3 |
Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D080267-v2 |
Top Bridge, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Final Design
Suspensions
|
22 Mar 2012 |
| D080268-v2 |
Base Plate, Upper Blade Bake Fixture, HLTS |
Derek Bridges |
Suspensions
Final Design
|
22 Mar 2012 |
| D080265-v3 |
Upper Blade Bake Fixture, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
22 Mar 2012 |
| D0901241-v2 |
Earthquake Stop Mount, Bridge, HLTS |
Derek Bridges |
Final Design
Suspensions
|
19 Mar 2012 |
| D070310-v2 |
Top Blade Guard Bar, HLTS |
Derek Bridges |
Suspensions
Final Design
|
19 Mar 2012 |
| D070309-v2 |
Top Blade Guard Riser, HLTS |
Derek Bridges |
Final Design
Suspensions
|
19 Mar 2012 |
| D0901286-v2 |
Secondary Metal Prism Breakoff, HLTS |
Michael Meyer et al. |
Final Design
Suspensions
|
18 Mar 2012 |
| D070338-v4 |
Metal Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D080238-v2 |
Collar, Lower, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080236-v2 |
Collar, Lower, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080234-v2 |
Collar, Lower, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080232-v2 |
Collar, Lower, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080183-v2 |
Collar, Lower, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080229-v2 |
Collar, Upper, 900g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080227-v2 |
Collar, Upper, 700g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080225-v2 |
Collar, Upper, 500g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080223-v2 |
Collar, Upper, 300g, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D080182-v2 |
Collar, Upper, 100g, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D030155-v2 |
Center Offset, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D970075-v2 |
Dumbbell Standoff |
Calum Torrie |
Suspensions
Final Design
|
17 Mar 2012 |
| D070336-v3 |
Main Section, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D070585-v4 |
Upper Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070394-v3 |
Upper Clamp, Intermediate Wire, Outside, HLTS |
Michael Meyer |
Suspensions
Final Design
|
17 Mar 2012 |
| D030149-v2 |
Intermediate Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D070405-v3 |
Lower Clamp, Intermediate Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D070406-v3 |
Lower Clamp, Intermediate Wire, Outside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
17 Mar 2012 |
| D080263-v2 |
Additional Mass Disk, 150g |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Mar 2012 |
| D070333-v2 |
Additional Mass Disk, 100g |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Mar 2012 |
| D0901405-v2 |
Additional Mass Disk, 50g |
Derek Bridges |
Suspensions
Preliminary Design
|
17 Mar 2012 |
| D030139-v2 |
Roll Offset, T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
17 Mar 2012 |
| D020615-v4 |
Lower Blade, HLTS |
Michael Meyer et al. |
Final Design
Suspensions
|
16 Mar 2012 |
| D020652-v2 |
C-Clamp, Upper Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
16 Mar 2012 |
| D070341-v3 |
Upper Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Mar 2012 |
| D020617-v2 |
Upper Blade, HLTS |
Calum Torrie et al. |
Final Design
Suspensions
|
16 Mar 2012 |
| D070331-v3 |
Shim, 1.0mm, Upper Blade, HLTS |
Derek Bridges |
Final Design
Suspensions
|
16 Mar 2012 |
| D070460-v2 |
Earthquake Stop Mount, Long, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D070322-v2 |
Earthquake Stop Bracket, Long, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D070319-v2 |
Earthquake Stop Assembly, Bridge, HLTS |
Derek Bridges |
Suspensions
Final Design
|
14 Mar 2012 |
| D0901553-v4 |
Lower AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Final Design
Suspensions
|
14 Mar 2012 |
| D0901552-v4 |
Upper AOSEM Alignment Assembly, Bottom Mass, HLTS |
Bobby Moore et al. |
Final Design
Suspensions
|
14 Mar 2012 |
| D080677-v4 |
Coil Holder Assembly, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
13 Mar 2012 |
| D070335-v6 |
Upper Mass Assembly, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
12 Mar 2012 |
| D070334-v4 |
Intermediate Mass Assembly, HLTS |
Derek Bridges |
Final Design
Suspensions
|
12 Mar 2012 |
| D070328-v2 |
Rotating Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Final Design
Suspensions
|
12 Mar 2012 |
| D070326-v4 |
Rotational Adjuster, HLTS |
Derek Bridges |
Final Design
Suspensions
|
12 Mar 2012 |
| D070374-v2 |
Mounting Pad Body, HLTS |
Derek Bridges |
Suspensions
Final Design
|
12 Mar 2012 |
| D080727-v3 |
Earthquake Stop Assembly, Long Bracket, HLTS |
Derek Bridges |
Suspensions
Final Design
|
29 Feb 2012 |
| D080726-v3 |
Earthquake Stop Assembly, Long Mount, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
29 Feb 2012 |
| D070327-v2 |
Base Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
23 Feb 2012 |
| D070332-v6 |
HLTS Suspension Assembly |
Derek Bridges |
Preliminary Design
Suspensions
|
21 Feb 2012 |
| T0900020-v3 |
Checks on initial batch of production Quad blades |
Justin Greenhalgh |
Suspensions
|
12 Feb 2012 |
| D060311-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, FRONT AND REAR PLATE, NOISE TABLECLOTH |
Joe ODell |
Auxiliary Optics
Suspensions
|
09 Feb 2012 |
| D0901461-v2 |
HLTS Magnet Placement Fixture, Intermediate Mass |
Derek Bridges |
Suspensions
Final Design
|
09 Feb 2012 |
| D070008-v3 |
ADVANCED LIGO, SUS, QUAD LOWER STRUCTURE, SPACING PLUG |
Joe ODell et al. |
Fabrication
System Engineering
Final Design
|
23 Jan 2012 |
| D0901079-v2 |
HLTS Upper Wire Lower Clamp Assembly |
Derek Bridges |
Suspensions
Preliminary Design
|
23 Dec 2011 |
| D020682-v2 |
HSTS/OMC Lower Blade Clamp, Shim, 1mm |
Bobby Moore |
Suspensions
Final Design
|
22 Nov 2011 |
| D070052-v2 |
OMC Connector Bracket |
Janeen Romie |
Suspensions
|
21 Nov 2011 |
| D0902087-v3 |
Positioning Standoff, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
11 Oct 2011 |
| D0900681-v2 |
Library of Clamps, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0902452-v2 |
Standoff Side Plate, Short, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902445-v2 |
Standoff Plate, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901551-v4 |
Lower AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Oct 2011 |
| D0902024-v4 |
Upper AOSEM Alignment Assembly, Intermediate Mass, HLTS |
Bobby Moore et al. |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0901436-v2 |
Wire Clamp Mount, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0901435-v3 |
Wire Start Clamp, Inside, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
08 Oct 2011 |
| D0901135-v2 |
Mounting Block, Lower Clamp, Upper Wire, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D070449-v2 |
Coil Holder (Tablecloth), HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Oct 2011 |
| D0900688-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900687-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900686-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900685-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900684-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900683-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900682-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Inside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900696-v2 |
Blade Clamp (3.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900695-v2 |
Blade Clamp (3.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900694-v2 |
Blade Clamp (2.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900693-v2 |
Blade Clamp (2.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900692-v2 |
Blade Clamp (1.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D0900691-v2 |
Blade Clamp (1.0 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D0900690-v2 |
Blade Clamp (0.5 Degree), Lower Blade, Outside, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
08 Oct 2011 |
| D070320-v2 |
Mounting Bracket, Coil Holder, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
08 Oct 2011 |
| D080124-v3 |
Prism Breakoff, Lower Wire, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070438-v4 |
Clamp, Lower Loop Wire, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D030148-v2 |
Lower Wire Breakoff, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D030156-v2 |
Side Offset, Intermediate Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D080181-v2 |
Intermediate Mass Changer Assembly, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020624-v3 |
Lower Clamp, Upper Wire, Outside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D020610-v3 |
Lower Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D020611-v4 |
Upper Clamp, Upper Wire, Inside, HLTS |
Derek Bridges |
Suspensions
Final Design
|
05 Sep 2011 |
| D070329-v2 |
Pull Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D070330-v2 |
Push Plate, Rotational Adjuster, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Sep 2011 |
| D0900628-v2 |
Side Bracket, Mounting Pad, HLTS |
Derek Bridges |
Final Design
Suspensions
|
26 Aug 2011 |
| D0900626-v2 |
Mounting Pad Assembly, HLTS |
Derek Bridges |
Final Design
Suspensions
|
26 Aug 2011 |
| D070537-v2 |
Structure, HLTS |
Derek Bridges |
Final Design
Suspensions
|
26 Aug 2011 |
| D0900627-v2 |
Front Bracket, Mounting Pad, HLTS |
Derek Bridges |
Final Design
Suspensions
|
19 Aug 2011 |
| D090433-v2 |
aLIGO SUS, QUAD TRANSPORT PAD L BAR |
Joe ODell |
Final Design
Suspensions
|
27 Jul 2011 |
| D070548-v3 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM MASS STOP, BOTH CHAINS |
Joe ODell |
Suspensions
|
21 Jul 2011 |
| D080180-v1 |
AdL SUS LASTI Noise Prototype Controls Wiring |
Jay Heefner |
Suspensions
Installation
|
11 Jul 2011 |
| D060294-v1 |
LASTI AdL SUS Triple Controls Wiring |
Jay Heefner |
Installation
Suspensions
|
11 Jul 2011 |
| D060383-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP BODY |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060384-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, MIDDLE WIRE CLAMP |
Joe ODell |
Suspensions
|
21 Jun 2011 |
| D060328-v3 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, 3/8-16 UNC T NUT Based on Wixroyd 2418.W120 |
Joe ODell et al. |
Suspensions
Final Design
|
21 Jun 2011 |
| D070575-v3 |
Base Plate, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
11 Jun 2011 |
| D080503-v3 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, SHEAR PLATE |
Joe ODell et al. |
Suspensions
|
24 May 2011 |
| M060056-v2 |
Advanced LIGO Reference Design |
David Shoemaker |
Conceptual Design
Reports
Detector
|
08 May 2011 |
| D0902062-v2 |
Vertical Locating Block, Magnet Placement Fixture, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
18 Apr 2011 |
| D0902068-v2 |
Standoff Ring, Magnet Placement Fixture, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
16 Apr 2011 |
| T080021-v3 |
UK UIM Driver Pre-Production Prototype Test Plan |
Jay Heefner |
Suspensions
System Test
|
11 Apr 2011 |
| D060314-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, LEFT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D060312-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, RIGHT HAND PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
08 Apr 2011 |
| D060359-v3 |
Advanced LIGO, SUS, Quad N-Ptype, Additional Mass |
Joe ODell |
Suspensions
|
28 Mar 2011 |
| D0901492-v3 |
AOSEM Alignment Bracket, Intermediate Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
10 Mar 2011 |
| D0901549-v3 |
AOSEM Alignment Bracket, Bottom Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
10 Mar 2011 |
| D080080-v4 |
ADVANCED LIGO, SUS, THIS, BS TOP STAGE, BEAM SPLITTER |
Joe ODell |
Suspensions
|
02 Mar 2011 |
| D0902064-v2 |
Base Plate, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D0902066-v2 |
Optic Rest Block, Optic Base Assembly, Magnet Placement Fixture |
Derek Bridges |
Suspensions
Final Design
|
25 Feb 2011 |
| D020380-v2 |
Wire Start Clamp, Outside |
Derek Bridges |
Preliminary Design
Suspensions
|
23 Feb 2011 |
| D0900603-v2 |
Wire Start Clamp, Inside, Upper Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
07 Feb 2011 |
| D0900634-v2 |
Wire Start Clamp, Inside, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
07 Feb 2011 |
| D0900632-v2 |
Wire Clamp Mount, Intermediate Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
07 Feb 2011 |
| D0901433-v2 |
Base Plate, Lower Loop Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
01 Feb 2011 |
| D0900631-v2 |
Blade Clamp Mount, Intermediate Wire Jig, HLTS |
Michael Meyer |
Suspensions
Final Design
|
31 Jan 2011 |
| D0900595-v2 |
Base Plate, Upper Wire Jig, HLTS |
Derek Bridges |
Final Design
Suspensions
|
30 Jan 2011 |
| D0900597-v2 |
Wire Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Final Design
Suspensions
|
21 Jan 2011 |
| D0900596-v2 |
Blade Clamp Mount, Upper Wire Jig, HLTS |
Derek Bridges et al. |
Suspensions
Final Design
|
21 Jan 2011 |
| D080749-v2 |
Advanced LIGO, SUS, THIS, Screwed Rod Top Stage Tooling |
Joe ODell |
Suspensions
|
07 Jan 2011 |
| D080748-v2 |
Advanced LIGO, SUS, THIS, Bush Top Stage Tooling |
Joe ODell et al. |
Suspensions
|
07 Jan 2011 |
| D0901550-v2 |
Upper AOSEM Mounting Bracket, Bottom Mass, HLTS |
Bobby Moore et al. |
Suspensions
Final Design
|
08 Nov 2010 |
| D0900340-v2 |
Lower AOSEM Mounting Bracket, Bottom Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
05 Nov 2010 |
| D070552-v2 |
Advanced LIGO, SUS, ITM/ETM Structure, ITM/ETM Sleeve |
Joe ODell et al. |
Final Design
Suspensions
|
05 Oct 2010 |
| D060334-v2 |
Advanced LIGO, SUS, Quad N-Ptype, WIRE CLAMP JAW, ALL MASSES |
Joe ODell |
Final Design
Suspensions
|
30 Sep 2010 |
| D060333-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, WIRE CLAMP BODY, TOP STAGE |
Joe ODell |
Suspensions
|
30 Sep 2010 |
| D060331-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, JACKING SCREW/Earthquake Stop |
Joe ODell |
Final Design
Suspensions
|
30 Sep 2010 |
| D060330-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, ROTATIONAL ADJUSTER BASE PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D090434-v2 |
ADV LIGO, SUS, THIS, FRONT TRANSPORT PAD, QUAD SUS |
Joe ODell |
Final Design
Suspensions
|
30 Sep 2010 |
| D080245-v3 |
ADV LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE STOP, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D080244-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TEST REACTION MASS, EARTHQUAKE STOP MOUNT PLATE |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060448-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PIN (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Suspensions
Final Design
|
30 Sep 2010 |
| D060325-v2 |
Advanced LIGO, SUS, TOP STAGE N-P TYPE, ROTATIONAL ADJUSTER, STATIC HALF |
Joe ODell |
Suspensions
Final Design
|
29 Sep 2010 |
| D080725-v2 |
Earthquake Stop for Metal or Glass, 2.5 Inch |
Derek Bridges |
Final Design
Suspensions
|
26 Sep 2010 |
| D080724-v3 |
Mounting Cap, Earthquake Stop |
Derek Bridges |
Suspensions
Final Design
|
26 Sep 2010 |
| D070579-v2 |
Upper Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
08 Sep 2010 |
| D070576-v2 |
Lower Front Gusset, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| D070577-v2 |
Side Gusset, Structural Weldment, HLTS |
Derek Bridges |
Final Design
Suspensions
|
31 Aug 2010 |
| D070578-v2 |
Side Strut, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| D070580-v2 |
Top Gusset, Structural Weldment, HLTS |
Derek Bridges |
Suspensions
Final Design
|
31 Aug 2010 |
| D080006-v3 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS LOWER BOTTOM HALF |
Joe ODell et al. |
Suspensions
|
19 Aug 2010 |
| D030023-v3 |
Screw, Socket Head Cap, 1/4-20 UNC-3A X 1 Long, Fully Threaded, Rounded End |
Derek Bridges |
System Engineering
Final Design
|
16 Aug 2010 |
| D080042-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP ASSY #1, BS TOP MASS |
Joe ODell |
Suspensions
|
05 Aug 2010 |
| D020653-v2 |
Screwdrive System, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020607-v3 |
T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Final Design
|
03 Aug 2010 |
| D020605-v3 |
Main Section, Upper Mass, HLTS |
Derek Bridges |
Final Design
Suspensions
|
03 Aug 2010 |
| D080504-v2 |
ADVANCED LIGO, SUS, THIS, BEAM SPLITTER UPPER STRUCTURE, BOTTOM RING |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080502-v2 |
ADVANCED LIGO, SUS - BEAM SPLITTER UPPER STRUCTURE, FACE PLATE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080112-v2 |
ADVANCED LIGO, SUS, BS TRIPPLE, BS BOTTOM TABLECLOTH PLATE, BS BOTTOM TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080111-v2 |
ADVANCED LIGO, SUS, THIS, BS BOTTOM TABLECLOTH, BEAMSPLITTER SUSPENSION |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080109-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH TOP PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080108-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH SIDE PLATE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080106-v2 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH FRONT PANEL, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080088-v2 |
ADVANCED LIGO, SUS, BLADE WIRE CLAMP, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D080081-v2 |
ADVANCED LIGO, SUS, TOP STAGE STIFF BACK, BS TOP STAGE |
Joe ODell |
Suspensions
|
03 Aug 2010 |
| D070433-v2 |
ADVANCED LIGO, SUS, WIRE CLAMP JAW, BS MASSES |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070432-v2 |
ADVANCED LIGO, SUS, BASE PLATE WIRE CLAMP BODY, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070428-v2 |
ADVANCED LIGO, SUS, TOP MASS N-P TYPE, STOP BRIDGE, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070424-v2 |
ADVANCED LIGO, SUS, PITCH ADJUSTER & MASS, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D070419-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP BOTTOM JAW, BS TOP MASS |
Joe ODell |
Suspensions
|
02 Aug 2010 |
| D090438-v2 |
ADV LIGO, SUS, THIS, RINGHEATER ATTACHMENT PIECE, QUAD N-PTYPE LS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080243-v2 |
ADV LIGO, SUS, QUAD N-PTYPE PEN-RE MASS, EARTHQUAKE STOP MOUNT PLATE, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080242-v2 |
ADV LIGO, SUS, THIS, MODIFIED 1/4-20 UNC X 1" HEX HEAD, PEN RE MASS BUMP STOPS |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D080167-v2 |
Advanced LIGO, SUS, Penre MASS Quad N-Ptype, CAN FRONT PLATE ITM PEN RE MASS CAN |
Joe ODell |
Suspensions
|
27 Jul 2010 |
| D070549-v2 |
ADVANCED LIGO, SUS, ETM/ITM LOWER STRUCTURE, UIM EARTHQUAKE STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070547-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070546-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, REACTION CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070545-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, LEFT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070544-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE SUSPENSION STRUCTURE, TEST CHAIN UIM STOP, RIGHT HAND |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070543-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM TC E'QUAKE STOP ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070542-v2 |
ADVANCED LIGO, SUS, INNER LOWER STRUCTURE, SUSPENSION STRUCTURE, UIM RC E'QUAKE STOPS ASSY #2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070541-v2 |
ADVANCED LIGO, SUS, AS DRW, UIM RC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070540-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, UIM TC E'QUAKE STOP ASSY #1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070238-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Steel Disk (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070236-v2 |
Advanced LIGO, SUS, Penultimate Mass Flag Assembly, Penultimate Mass Flag Mount (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070235-v2 |
Advanced LIGO, SUS, Pen Re Mass Magnets, Magnet Holder (External Shielded Magnets) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070226-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Cable Clamp Jaw |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070224-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Mass Side Wireclamp Body |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D070223-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Pen Re Mass Wire Clamp |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060481-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ROUND MASS FRONT STOP |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060479-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PEN RE MASS ASSY PAD |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060478-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 2 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060477-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, PENULTIMATE MASS LWR STOP MT 1 |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060476-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, EARTHQUAKE-STOP MOUNTS-SHORT, LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060462-v3 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, INNER FACE PLATE LOWER STRUCTURE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060450-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, SPACER # 4 (TEST MASS ADJUSTER) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060449-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060447-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, ADJUSTABLE PAD JAW, ADJUSTABLE PAD ASSY (LONG) |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060430-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE |
Joe ODell |
Suspensions
|
26 Jul 2010 |
| D060421-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, MASS AND SUPPORT MEMBER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060420-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, WIRE CLAMP ADJUSTMENT BLOCK |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060419-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060417-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, OSEM MAGNET AND FLAG CONCEPT PART BUILT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060415-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060414-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE TiP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060413-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, 1/4" 20 UNC X 1" CAP HEAD, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060412-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM BRACKET (TOP OSEM) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060411-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060408-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, ECD MAGNET MOUNT PLATE, OSEM MAGNET ASSEMBLY |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060407-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, OSEM & ECD UNIT BACKBONE, OSEM & ECD UNIT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060406-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BASE PLATE STIFFENER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060405-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, PITCH ADJUSTER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060404-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, BLADE CLAMP (TOP Half) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060399-v2 |
ADVANCED LIGO, SUS, QUAD TOP MASS N-PTYPE, STOP BRIDGE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060398-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, PITCH ADJUSTER & MASS ADJUSTER TURRET |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060397-v2 |
ADVANCED LIGO, SUS, TOP MASS QUAD N-PTYPE, TOP MASS SPACER |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060395-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, WIRE CLAMP BODY (TOP MASS WIRE CLAMP) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060391-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Mass, TOP WIRE CLAMP (Top Mass) |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060385-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS FLAG MOUNT |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060382-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, UI MASS TOP PLATE |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060381-v2 |
ADVANCED LIGO, SUS, UI MASS QUAD N-PTYPE, UI MASS BLADE ECD |
Joe ODell |
Suspensions
|
23 Jul 2010 |
| D060380-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060379-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE UI MASS, OSEM AND FLAG COUNTERWEIGHT UI MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060378-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060377-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, BLADE TIP Z POSITION ADJ (BTM HALF PART 2) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060376-v2 |
Advanced LIGO, SUS, Quad N-Ptype UI MASS, MASS BASE PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060358-v2 |
Advanced LIGO, SUS, Quad N-Ptype DUMMY MASSES, DUMMY TEST MASS SIDE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060354-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CLAMPING COLLAR (PITCH MASS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060350-v2 |
Advanced LIGO, SUS, Penre ETM Quad N-Ptype, CONTROL RING, LIGO 1 OSEM MOUNT |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060344-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, BACK PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060343-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, FRONT PLATE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060342-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, CENTRAL MASS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060340-v2 |
ADVANCED LIGO, SUS, ROUND MASS WIRE CLAMP, ROUND MASS CLAMP JAW, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060338-v2 |
ADVANCED LIGO, SUS, PENRE ETM QUAD N-PTYPE, ROUND MASS WIRE CLAMP PLATE, PEN-RE MASS WIRE CLAMP |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060327-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (BTM HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060326-v2 |
Advanced LIGO, SUS, Quad N-Ptype Top Stage, BLADE CLAMP (TOP HALF) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060321-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, POSITION ADJUSTER FOR FRONT PITCH OSEM |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060318-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, OSEM AND ECD MOUNTING BRACKET (LOCAL CONTROLS) |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060317-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, ECD STATIC BLOCK |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060315-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TABLECLOTH PINCH PLATE, UPPER STRUCTURE |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060313-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, TOP PLATE, NOISE TABLECLOTH |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060237-v2 |
ADV LIGO, SUS, QUAD N-PTYPE UI MASS, BOTTOM BLADE SPRINGS |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060236-v2 |
ADV LIGO, SUS, QUAD N-PTYPE TOP MASS, MIDDLE BLADE SPRING |
Joe ODell |
Suspensions
|
22 Jul 2010 |
| D060445-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BUSH (ADJUSTABLE PAD ASSYS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060444-v2 |
ADVANCED LIGO, SUS, QUAD N-PTYPE LOWER STRUCTURE, BASE BAR - LONG (ADJUSTABLE STOP MECHANISM) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D060357-v2 |
Advanced LIGO, SUS, ASSEMBLY MASSES Quad N-Ptype, HALF MASS (DUMMY HALF REACTION MASS) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070216-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Upper Structure Stay Wire Clamp |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D070215-v2 |
Advanced LIGO, SUS, Quad N-PType Wiring Harness, Wire Clamp Body (Top Ring Wire Clamp) |
Joe ODell |
Suspensions
|
20 Jul 2010 |
| D0901548-v2 |
AOSEM Adjustment Collar |
Bobby Moore |
Suspensions
Final Design
|
13 Jul 2010 |
| D080221-v2 |
Guard, Lower Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
07 Jul 2010 |
| D0900666-v2 |
Base Plate, Library of Clamps, Upper Blade, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Jul 2010 |
| D080008-v2 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, LOWER EQ STOP PLATE |
Joe ODell |
Suspensions
|
14 May 2010 |
| T080014-v2 |
UK Top Driver Pre-Production Prototype Test Plan |
Jay Heefner |
Suspensions
System Test
|
12 May 2010 |
| D060370-v2 |
STRAIGHTENING TOOLING ASSY - QUAD TOP STAGE BLADE TOOLING |
Joe ODell |
Suspensions
|
03 May 2010 |
| T060040-v1 |
Quad Suspension Noise Prototype Assembly Procedure |
Ian Wilmut |
Suspensions
Final Design
|
02 Mar 2010 |
| D080369-v2 |
ADVANCED LIGO, SUS, THIS, BS ROUND BODY MASS, BEAMSPLITTER ROUND MASS |
Joe ODell |
Suspensions
|
18 Feb 2010 |
| D060278-v1 |
8 Channel SUS Coil Driver |
Jay Heefner |
Final Design
Suspensions
|
17 Feb 2010 |
| D080723-v2 |
Cap Body, Resin, Earthquake Stop |
Derek Bridges |
Preliminary Design
Suspensions
|
15 Dec 2009 |
| D070581-v1 |
Leg, HLTS Structural Weldment |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Dec 2009 |
| D070583-v1 |
Front Cross Beam, Thin, HLTS Structural Weldment |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Dec 2009 |
| D070584-v1 |
Side Cross Beam, Thin, HLTS Structural Weldment |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Dec 2009 |
| D080283-v1 |
Front Cross Beam, Thick, HLTS Structural Weldment |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Dec 2009 |
| D080282-v1 |
Side Cross Beam, Thick, HLTS Structural Weldment |
Derek Bridges |
Preliminary Design
Suspensions
|
03 Dec 2009 |
| E0900337-v1 |
Traveler for HLTS Prototype Parts - Batch 2 |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Nov 2009 |
| E0900338-v1 |
Traveler for HLTS Prototype Parts - Batch 3 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900339-v1 |
Traveler for HLTS Prototype Parts - Batch 4 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900368-v1 |
Traveler for HLTS Prototype Parts - Batch 5 |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Nov 2009 |
| E0900390-v1 |
Traveler for HLTS Prototype Parts - Batch 6 |
Derek Bridges |
Preliminary Design
Suspensions
|
06 Nov 2009 |
| E0900395-v1 |
Traveler for HLTS Prototype Parts - Batch 7 |
Derek Bridges |
Suspensions
Preliminary Design
|
06 Nov 2009 |
| D0901404-v1 |
Active Tip-Tilt Blade Spring Mounting Platform |
Michael Meyer |
Suspensions
Preliminary Design
|
05 Nov 2009 |
| D0902538-x0 |
HSTS Dog Clamp |
Michael Meyer |
Suspensions
Final Design
|
29 Oct 2009 |
| D0902525-x0 |
HSTS Intermediate Mass Catcher Assembly |
Michael Meyer |
Suspensions
Final Design
|
29 Oct 2009 |
| D070420-v2 |
ADVANCED LIGO, SUS, BLADE CLAMP TOP JAW, BS TOP MASS |
Joe ODell |
Suspensions
|
27 Oct 2009 |
| D070430-v2 |
ADVANCED LIGO, SUS, TOP PLATE, BS TOP MASS |
Joe ODell |
Suspensions
|
27 Oct 2009 |
| D080107-v1 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH BACK BRIDGE, BEAMSPLITTER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D080110-v1 |
ADVANCED LIGO, SUS, BS TRIPLE, TABLECLOTH MOUNT BRACKET, BEAMSPLITER TOP TABLECLOTH |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070418-v1 |
ADVANCED LIGO, SUS, BLADE TIP HEIGHT ADJUSTMENT #1, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070434-v1 |
ADVANCED LIGO, SUS, STABILITY LEG, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070423-v1 |
ADVANCED LIGO, SUS, PITCH ADJUSTER & MASS, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D070422-v1 |
ADVANCED LIGO, SUS, BASE PLATE, BS TOP MASS |
Joe ODell |
Suspensions
|
26 Oct 2009 |
| D080091-v1 |
ADVANCED LIGO, SUS, ROTATIONAL BUSH, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080089-v1 |
ADVANCED LIGO, SUS, BLADE TOP SPIN, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080087-v1 |
ADVANCED LIGO, SUS, BLADE WIRE CLAMP ASSEMBLY, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080086-v1 |
ADVANCED LIGO, SUS, ADJUSTER ARM, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080085-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP BASE, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080084-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP TOP, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D080083-v1 |
ADVANCED LIGO, SUS, BLADE CLAMP BOTTOM, BS TOP STAGE |
Joe ODell |
Suspensions
|
23 Oct 2009 |
| D0902351-v1 |
AdLIGO TCS Ring Heater Shield |
Craig Conley |
Suspensions
|
22 Oct 2009 |
| D080012-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS EQ STOP BRACKET |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080011-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, LS - US - BRACKET |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080010-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS TM SLIDING PAD |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080007-v1 |
ADVANCED LIGO, SUS, BS LOWER STRUCTURE, BS LS TOP HALF |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| D080505-v1 |
ADVANCED LIGO, SUS, BS TRIPLE SUS, BS US CROSS MEMBER, BS UPPER STRUCTURE, BOTTOM RING |
Joe ODell |
Suspensions
|
22 Oct 2009 |
| E0900302-x0 |
DCN - HLTS Magnet Placement Fixtures |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
21 Oct 2009 |
| D0902335-v1 |
Plunger/Gripper Assembly |
Derek Bridges |
Preliminary Design
Suspensions
|
21 Oct 2009 |
| D0902410-x0 |
AdLIGO TCS Ring Heater Block |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| D0902409-x0 |
AdLIGO TCS Ring Heater Back Plate LH |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| D0902408-x0 |
AdLIGO TCS Ring Heater Back Plate RH |
Craig Conley |
Suspensions
|
19 Oct 2009 |
| D0901296-v2 |
Blade Characterization Stand - Wire Clamp Bolt |
Michael Meyer |
Final Design
Suspensions
|
13 Oct 2009 |
| D990160-v1 |
Brass Plunger |
Janeen Romie |
Preliminary Design
Suspensions
|
12 Oct 2009 |
| D990161-v1 |
Pencil Mechanism Holder |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| D990148-v1 |
Fluorel Tip, 1/4-20 |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| D970562-v1 |
Beamsplitter Chamfer Stop |
Janeen Romie |
Suspensions
Preliminary Design
|
12 Oct 2009 |
| E0900344-v1 |
Drawing Tree for Assembly D0901269-v1 |
Craig Conley |
Suspensions
|
11 Oct 2009 |
| D080538-v1 |
ADVANCED LIGO, SUS, THIS, FM ENVELOPE DESIGN |
Joe ODell |
Suspensions
|
08 Oct 2009 |
| T0900391-v1 |
Pulling/Welding Procedure (LASTI, September 2009) |
Mark Barton |
Suspensions
Subsystem Test
|
08 Oct 2009 |
| D080537-v1 |
ADVANCED LIGO, SUS, THIS, BS ENVELOPE |
Joe ODell |
Suspensions
|
07 Oct 2009 |
| D0902353-x0 |
AdLIGO SUS TCP Ring Heater Shield Bracket LH |
Craig Conley |
Suspensions
|
07 Oct 2009 |
| D0902352-x0 |
AdLIGO SUS TCP Ring Heater Shield Bracket RH |
Craig Conley |
Suspensions
|
07 Oct 2009 |
| D0902344-x0 |
AdvLIGO HSTS Metal Test Mass Assembly (D070092 Optic) |
Michael Meyer |
Final Design
Suspensions
|
06 Oct 2009 |
| D0902343-x0 |
AdvLIGO HSTS Metal Test Mass (D070092 Optic) |
Michael Meyer |
Suspensions
Final Design
|
06 Oct 2009 |
| T080221-v1 |
BS/FM Component List |
Joe ODell |
Suspensions
|
05 Oct 2009 |
| D0902314-x0 |
OSEM Magnet and Flag Assembly (5mm thick magnets) |
Michael Meyer |
Final Design
Suspensions
|
02 Oct 2009 |
| D0902313-x0 |
HSTS Upper Mass Magnet Spacer |
Michael Meyer |
Final Design
Suspensions
|
02 Oct 2009 |
| D0902311-x0 |
HSTS Weldment Gusset |
Michael Meyer |
Suspensions
Final Design
|
02 Oct 2009 |
| T070005-v1 |
Fibre Pulling and Welding Machine Electronics |
Mark Barton |
Suspensions
|
01 Oct 2009 |
| D0902290-x0 |
HSTS Structural Weldment Gusset (2.4 x 3 x 0.375) |
Michael Meyer |
Suspensions
Final Design
|
01 Oct 2009 |
| T0900079-v1 |
AdvLIGO OMC Suspension Electronics Requirements |
Jay Heefner |
Requirements
Suspensions
|
28 Sep 2009 |
| D0902070-x0 |
Standoff Side Bracket, Magnet Placement Fixture, Test Mass, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
15 Sep 2009 |
| D0902067-x0 |
Pressure Bracket, Magnet Placement Fixture, Test Mass, HLTS |
Derek Bridges |
Preliminary Design
Suspensions
|
15 Sep 2009 |
| E0900243-x0 |
DCN - AOSEM Alignment and Mounting Brackets |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
11 Sep 2009 |
| E0900277-x0 |
DCN - Updated HLTS Test Mass Parts and Assembly, Lower Loop Wire Parts, Jig, and Assembly, and Intermediate Mass Assembly |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
11 Sep 2009 |
| D0902014-x0 |
HSTS Intermediate Wire Clamp (Lower) Angled |
Michael Meyer |
Final Design
Suspensions
|
10 Sep 2009 |
| D0901544-v1 |
Cable Clamp Liner, 40-Meter Cable Clamp |
Derek Bridges |
Suspensions
Preliminary Design
|
04 Sep 2009 |
| D010120-v1 |
40-Meter Cable Clamp |
Derek Bridges |
Suspensions
Preliminary Design
|
04 Sep 2009 |
| D0901547-v1 |
Top Plate, 40-Meter Cable Clamp |
Derek Bridges |
Preliminary Design
Suspensions
|
04 Sep 2009 |
| D0901545-v1 |
Base Plate, 40-Meter Cable Clamp |
Derek Bridges |
Suspensions
Preliminary Design
|
03 Sep 2009 |
| D0901882-x0 |
OMC SUS Riser Block for PD replacement |
Michael Meyer |
Preliminary Design
Suspensions
|
27 Aug 2009 |
| T0900164-v1 |
UK PUM Driver Pre-Production Prototype Test Plan |
Jay Heefner |
System Test
Suspensions
|
26 Aug 2009 |
| D060235-v1 |
ADV LIGO, SUS, QUAD N-PTYPE TOP STAGE, TOP STAGE BLADES |
Joe ODell |
Suspensions
|
17 Aug 2009 |
| D0901251-v1 |
Blade Characterization Stand Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901249-v1 |
Blade Characterization Stand - Actuator Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901250-v1 |
Blade Characterization Stand - Ball Slide Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901298-v1 |
Blade Characterization Stand - Wire Clamp Bolt Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901297-v1 |
Blade Characterization Stand - Wire Clamp Bolt, Outside |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901293-v1 |
Blade Characterization Stand - Track Top Adapter |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901246-v1 |
Blade Characterization Stand - Actuator Mount |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901245-v1 |
Blade Characterization Stand - Track Mount |
Michael Meyer |
Preliminary Design
Suspensions
|
14 Aug 2009 |
| D0901243-v1 |
Blade Characterization Stand - Baseplate |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| D0901242-v1 |
Blade Characterization Stand - Adapter |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Aug 2009 |
| E0900239-x0 |
DCN - HLTS Updated Drawings (Upper Wire and Upper Blade Bake Fixture) |
Derek Bridges |
Suspensions
Change Control
Preliminary Design
|
14 Aug 2009 |
| E0900205-x0 |
DCN - HLTS Lower Loop Wire Jig |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
10 Aug 2009 |
| E0900232-x0 |
DCN - HLTS Test Mass and Related Parts |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
05 Aug 2009 |
| E0900221-x0 |
DCN - HLTS Coil Holder (Tablecloth) Assembly and Parts |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
03 Aug 2009 |
| E0900204-x0 |
DCN - HLTS Intermediate Wire Jig |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
03 Aug 2009 |
| D0901409-v1 |
Tip-Tilt Blade Spring Viton Damper Mount |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jul 2009 |
| D0901403-v1 |
Passive Tip-Tilt Blade Spring Mounting Platform |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jul 2009 |
| D0901166-v1 |
Tip-Tilt Blade Wire Clamp |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jul 2009 |
| D0901165-v1 |
Tip-Tilt Blade Wire Clamp Block |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jul 2009 |
| D0901164-v1 |
Tip-Tilt Blade Spring |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jul 2009 |
| D0901507-x0 |
Tip-Tilt Viton Damper Mount (Extended) |
Michael Meyer |
Preliminary Design
Suspensions
|
29 Jul 2009 |
| E0900189-x0 |
DCN - HLTS Test Mass Assembly Parts (and HLTS Intermediate Mass Main Section) |
Derek Bridges |
Suspensions
Change Control
Preliminary Design
|
28 Jul 2009 |
| E0900176-x0 |
DCN - HLTS Assembly Drawings |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
27 Jul 2009 |
| E0900220-x0 |
DCN - OSEM Magnet and Flag Assembly |
Derek Bridges |
Suspensions
|
27 Jul 2009 |
| E0900198-x0 |
DCN - HLTS Upper Mass Parts |
Derek Bridges |
Suspensions
Change Control
Preliminary Design
|
24 Jul 2009 |
| E0900213-x0 |
DCN - Magnet Holder (OMC SUS, HLTS) |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
22 Jul 2009 |
| D020608-v1 |
X-Direction Offset, T-Piece, Upper Mass, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
21 Jul 2009 |
| E0900193-x0 |
DCN - HLTS Lower Loop Wire Parts |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
20 Jul 2009 |
| E0900207-v1 |
Traveler for HLTS Structural Weldment (D070442) Prototype |
Derek Bridges |
Preliminary Design
Suspensions
|
17 Jul 2009 |
| D0901411-x0 |
Tip-Tilt Viton Holder |
Michael Meyer |
Suspensions
Preliminary Design
|
14 Jul 2009 |
| D070213-v1 |
ADVANCED LIGO, SUS OMC, Lower Clamp Wire Clamp Assembly, Wire Clamp For Optical Bench |
Calum Torrie |
Suspensions
|
14 Jul 2009 |
| E0900184-x0 |
DCN - HLTS Intermediate Wire Parts |
Derek Bridges |
Suspensions
Change Control
Preliminary Design
|
07 Jul 2009 |
| G0900579-v1 |
Suspension loss in Advanced gravitational wave detectors |
Alan Cumming |
Suspensions
|
07 Jul 2009 |
| E0900173-x0 |
DCN - HLTS Intermediate Mass Parts |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
07 Jul 2009 |
| T0900278-v2 |
ALIGO NP-type: Preparations and hazard analysis for test hangs at LASTI in July/August 2009 |
Giles Hammond et al. |
Suspensions
System Test
|
02 Jul 2009 |
| D080448-v1 |
Passive Tip-Tilt Structure Assembly |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jun 2009 |
| D080722-v1 |
Passive Tip-Tilt ECD (Low-Damping) |
Michael Meyer |
Suspensions
Preliminary Design
|
30 Jun 2009 |
| D080450-v1 |
Passive Tip-Tilt ECD Mount |
Michael Meyer |
Preliminary Design
Suspensions
|
30 Jun 2009 |
| E080337-v1 |
Drawing Tree - OMC SUS (LHO) Overall Assembly and Fixtures |
Derek Bridges |
Suspensions
Basic R&D
|
25 Jun 2009 |
| E080418-v1 |
DCN - HAM Large Triple Suspension Blade and Wire Clamps |
Michael Meyer |
Suspensions
Preliminary Design
Change Control
|
23 Jun 2009 |
| E0900162-x0 |
DCN - HLTS Earthquake Stop Mounts and Assemblies |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
19 Jun 2009 |
| G0900586-v1 |
Flame welding tests for monolithic suspensions of the mirrors of future GW interferometers. |
Giles Hammond et al. |
Basic R&D
Suspensions
|
19 Jun 2009 |
| G0900588-v1 |
Sensor for the control and damping of ‘violin-mode’ resonances in silica suspension fibres. |
Nick Lockerbie et al. |
Suspensions
Sensing and Control
|
19 Jun 2009 |
| G0900507-v2 |
Overview of monolithic suspension work for Advanced LIGO |
Timothy Bodiya et al. |
Basic R&D
Suspensions
|
19 Jun 2009 |
| D0901277-x0 |
SUS_MEZZANINE_LAB_OPTICAL_BENCH_ASSEM |
Ken Mailand |
Suspensions
Preliminary Design
|
17 Jun 2009 |
| D0900823-x0 |
Blade Characterization Stand - Table (Reference Only) |
Michael Meyer |
Conceptual Design
Suspensions
|
15 Jun 2009 |
| D0901244-x0 |
Blade Characterization Stand - Wheel Carriage |
Michael Meyer |
Suspensions
Conceptual Design
|
15 Jun 2009 |
| E0900166-x0 |
DCN - HLTS Upper Blade Bake Fixture |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
11 Jun 2009 |
| D070558-v1 |
Side Support, Upper Blade Bake Fixture |
Derek Bridges |
Preliminary Design
Suspensions
|
11 Jun 2009 |
| D070484-v1 |
EQ BRACKET SIDE ALT |
Bobby Moore |
Final Design
Suspensions
|
10 Jun 2009 |
| D070049-v1 |
EQ BRACKET TOP |
Bobby Moore |
Suspensions
Final Design
|
10 Jun 2009 |
| D0901193-x0 |
HSTS Structural Weldment Gusset (4.25x3x0.375) |
Michael Meyer |
Suspensions
Preliminary Design
|
10 Jun 2009 |
| D0901192-x0 |
HSTS Structrural Weldment |
Michael Meyer |
Preliminary Design
Suspensions
|
10 Jun 2009 |
| D0901191-x0 |
HSTS Structural Weldment Gusset (3x3x0.25") |
Michael Meyer |
Preliminary Design
Suspensions
|
10 Jun 2009 |
| E080427-v1 |
DCN - As-Built Drawings for OMC Suspensions |
Derek Bridges |
Change Control
Suspensions
|
09 Jun 2009 |
| D0901188-x0 |
HSTS Structural Weldment Gusset (3 x 3 x 0.375") |
Michael Meyer |
Preliminary Design
Suspensions
|
09 Jun 2009 |
| E0900160-x0 |
DCN - HLTS Upper Wire Assembly and Upper Wire Jig |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
08 Jun 2009 |
| E0900159-x0 |
DCN - HLTS Top Blade Guard |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
04 Jun 2009 |
| G0900367-v2 |
Update on Suspension Design for Advanced LIGO |
Norna Robertson |
Suspensions
|
29 May 2009 |
| D0900897-v1 |
Earthquake Stop for Glass (No Glass Tip), Simplified, 2 Inch |
Derek Bridges |
Final Design
Suspensions
|
21 May 2009 |
| E0900152-x0 |
DCN - Earthquake Stops |
Derek Bridges |
Suspensions
Preliminary Design
Change Control
|
21 May 2009 |
| E0900066-x0 |
DCN - HAM Large Triple Suspension Nonsuspended Hardware |
Derek Bridges |
Suspensions
Basic R&D
Change Control
|
21 May 2009 |
| E0900155-x0 |
DCN - HLTS Lower Blade Library of Clamps |
Derek Bridges |
Change Control
Preliminary Design
Suspensions
|
21 May 2009 |
| T0900207-v1 |
AdL Triple Low Current Driver Final Design Report |
Jay Heefner |
Suspensions
Final Design
|
20 May 2009 |
| E0900154-x0 |
DCN - HLTS Upper Blade Library of Clamps |
Derek Bridges |
Preliminary Design
Change Control
Suspensions
|
19 May 2009 |
| E0900065-x0 |
DCN - HAM Large Triple Suspension Suspended Hardware |
Derek Bridges |
Suspensions
Basic R&D
Change Control
|
15 May 2009 |
| D0901025-x0 |
Cap, Resin, Earthquake Stop |
Derek Bridges |
Preliminary Design
Suspensions
|
15 May 2009 |
| E0900142-v1 |
End Reaction Mass Barrel Coating |
GariLynn Billingsley |
System Engineering
Auxiliary Optics
Suspensions
Final Design
Core Optics
|
12 May 2009 |
| D020466-v1 |
SMALL TRIPLES 10x10mm Magnet |
Calum Torrie |
Suspensions
Basic R&D
|
07 May 2009 |
| D0900907-x0 |
Earthquake Stop for Glass, Simplified |
Derek Bridges |
Preliminary Design
Suspensions
|
06 May 2009 |
| D060456-x0 |
Impact Absorber, Earthquake Stop |
Derek Bridges et al. |
Suspensions
Document Migration
Preliminary Design
|
06 May 2009 |
| T0900190-v1 |
AdL Triple Low Current Driver Board Prototype Test Plan |
Jay Heefner |
Suspensions
System Test
|
06 May 2009 |
| G0900433-v1 |
AdL Low Current Triple Driver Design |
Jay Heefner |
Suspensions
|
06 May 2009 |
| T0900211-x0 |
Welding tests at Glasgow (5-8 May 2009) |
Marielle van Veggel et al. |
Final Design
Suspensions
|
06 May 2009 |
| D0900884-x0 |
AdL Triple Low Current Driver Board |
Jay Heefner |
Suspensions
|
04 May 2009 |
| D070360-x0 |
Mounting Bracket, Left, Coil Holder, HLTS |
Derek Bridges |
Suspensions
Preliminary Design
|
30 Apr 2009 |
| T0900055-v1 |
Rehang of the Quad NP with glass masses but metal wires (January 12-23 2009) |
Douglas Cook et al. |
Suspensions
|
29 Apr 2009 |
| D020324-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 2.5 DEGREES |
Michael Meyer |
Suspensions
Final Design
|
24 Apr 2009 |
| T070205-x0 |
OMC STRUCTURE SUMMARY (inc. FEA & EXPT results and weld tests) |
Calum Torrie |
Preliminary Design
Suspensions
|
25 Feb 2009 |
| D020307-v1 |
UPPER BLADE CLAMP, LOWER SIDE |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020321-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 0.5 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020311-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 2.0 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020323-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 1.5 DEGREES |
Michael Meyer |
Final Design
Suspensions
|
24 Apr 2009 |
| D020322-v1 |
UPPER BLADE CLAMP, LOWER SIDE, ANGLED 1.0 DEGREES |
Michael Meyer |
Suspensions
Final Design
|
24 Apr 2009 |
| D020687-v1 |
Upper Blade Clamp, Lower Side, 3.0 Degree |
Derek Bridges |
Final Design
Suspensions
|
24 Apr 2009 |
| D020688-v1 |
Upper Blade Clamp, Lower Side, 3.5 Degree |
Derek Bridges |
Suspensions
Final Design
|
24 Apr 2009 |
| D070031-v1 |
Lower Blade Clamp, Upper Side |
Derek Bridges |
Suspensions
Final Design
|
23 Apr 2009 |
| T080046-v1 |
UK Upper Intermediate Mass Driver Pre-Production Prototype Bench Test and Evaluation |
Vernon Sandberg et al. |
Suspensions
Preliminary Design
|
23 Apr 2009 |
| T0900170-v1 |
UK Top Driver Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner |
System Test
Suspensions
|
23 Apr 2009 |
| T0900156-v3 |
Reply to "OMC SUS FDR comments from reviewers" |
Norna Robertson et al. |
Suspensions
Reviews
Final Design
|
22 Apr 2009 |
| T0900189-v1 |
Vibrational Transfer Function and the Sound Velocity in a Finite Elastic Body |
Keita Kawabe |
Basic R&D
Suspensions
|
20 Apr 2009 |
| E0900100-v1 |
DCN to change D080748 & D080749 |
Janeen Romie |
Suspensions
Final Design
|
17 Apr 2009 |
| T080325-v1 |
Earthquake Stop Scatter |
Michael Smith |
Auxiliary Optics
Suspensions
Final Design
|
16 Apr 2009 |
| D0900637-v1 |
Self-Clinching Nut Test Assembly |
Derek Bridges |
Suspensions
Basic R&D
|
15 Apr 2009 |
| D0900636-v1 |
Self-Clinching Nut Test Piece |
Derek Bridges |
Suspensions
Basic R&D
|
13 Apr 2009 |
| E080446-v1 |
DCN - HAM Large Triple Suspension Structure |
Derek Bridges |
Suspensions
Fabrication
|
03 Apr 2009 |
| D020201-v1 |
HSTS Lower Blade |
Bobby Moore |
Suspensions
|
01 Apr 2009 |
| L0900058-v1 |
Request for waiver on glass shot blasted parts (BS/FM stay brackets) |
Dennis Coyne |
Final Design
Suspensions
|
29 Mar 2009 |
| G0900183-v2 |
Variant of violin mode damping system for fused silica fiber suspension |
Valery Mitrofanov |
Suspensions
|
24 Mar 2009 |
| G0900106-v1 |
HAM Suspensions Update - LSC/Virgo Collaborations Meeting, March 16-29, 2009 |
Derek Bridges |
Meeting
Suspensions
|
19 Mar 2009 |
| G0900252-v1 |
Damping struts at the Stanford ETF |
Brian Lantz |
Suspensions
Basic R&D
Seismic Isolation
|
19 Mar 2009 |
| T0900062-v1 |
OMC Suspension Final Design Review Checklist |
Janeen Romie |
Final Design
Suspensions
|
17 Mar 2009 |
| E080112-v1 |
Component Specification: ITM Penultimate Mass |
Russell Jones |
Fabrication
Final Design
Suspensions
|
16 Mar 2009 |
| E080090-v1 |
Component Specification: ETM Penultimate Mass |
Russell Jones |
Suspensions
Final Design
Fabrication
|
16 Mar 2009 |
| D080128-v1 |
Penultimate Mass, ITM Quad |
Russell Jones |
Fabrication
Final Design
Suspensions
|
16 Mar 2009 |
| M080034-v1 |
Magnet Swap Review for Enhanced LIGO |
Norna Robertson |
Upgrades
Reviews
Suspensions
|
13 Mar 2009 |
| T070035-v1 |
UK Coil Driver Reviewer Comments Summary |
Vernon Sandberg et al. |
Conceptual Design
Suspensions
|
13 Mar 2009 |
| D030243-v2 |
Cu Damper 2x2 Array Stripped |
Calum Torrie |
Basic R&D
Suspensions
|
06 Mar 2009 |
| D030215-v3 |
Eddy Current Magnet Holder |
Calum Torrie |
Suspensions
Basic R&D
|
06 Mar 2009 |
| D070048-v1 |
EQ Stop Bracket |
Janeen Romie |
Suspensions
|
06 Mar 2009 |
| D070050-v1 |
EQ Bracket Bottom |
Janeen Romie |
Suspensions
|
06 Mar 2009 |
| T080059-v1 |
Tilt tests on the RAL noise prototype – part 2 |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080056-v1 |
Application of hysteresis model to quad SUS |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080044-v1 |
Tests with single two-wire pendulum – part two |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080033-v1 |
Tests with single two-wire pendulum |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080030-v1 |
TILT TESTS ON RAL NOISE PROTOTYPE |
Ian Wilmut et al. |
Suspensions
Basic R&D
|
02 Mar 2009 |
| T080028-v1 |
Lateral blade movement in clamps Experiment |
Ian Wilmut et al. |
Basic R&D
Suspensions
|
02 Mar 2009 |
| T080111-v1 |
UK Satellite Amplifier Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner et al. |
System Test
Suspensions
|
02 Mar 2009 |
| E080172-v1 |
DCN: ETM and ITM Quad Penultimate Mass drawings and specifications |
Russell Jones |
Final Design
Suspensions
Change Control
|
02 Mar 2009 |
| E080171-v1 |
DCN: ALIGO SUS ETM QUAD End Reaction Mass (ERM) Drawing & Specification |
Russell Jones |
Final Design
Suspensions
Change Control
|
02 Mar 2009 |
| E080089-v1 |
Component Specification: ETM QUAD End Reaction Mass (ERM) |
Russell Jones |
Suspensions
Final Design
|
02 Mar 2009 |
| D0900339-v1 |
Enhanced LIGO OMC SUS Signal Flow Diagram |
Jay Heefner |
Suspensions
Final Design
|
02 Mar 2009 |
| T080048-v2 |
The Review of Production Drawings for the ALIGO ETM Quad End Reaction Mass: Support Notes |
Ken Strain et al. |
Suspensions
Final Design
System Test
|
27 Feb 2009 |
| D0900316-v1 |
ELIGO ISI and OMC SUS Controls Block Diagram |
Jay Heefner et al. |
Seismic Isolation
Suspensions
Final Design
|
25 Feb 2009 |
| D070569-v1 |
ELIGO OMC SUS Wiring |
Jay Heefner |
Suspensions
Installation
|
25 Feb 2009 |
| G080321-v1 |
Another Satellite Amplifier |
Jay Heefner |
Suspensions
Requirements
|
25 Feb 2009 |
| D070070-v1 |
Wire Clamp for Optical Bench, OMC |
Calum Torrie |
Suspensions
Basic R&D
|
24 Feb 2009 |
| T0900014-v2 |
UK UIM Coil Driver Pre-Production Prototype Bench Test and Evaluation |
Jay Heefner et al. |
Suspensions
System Test
|
24 Feb 2009 |
| T080326-v1 |
A Strategy to Prove and Provide Monolithic Suspensions |
Giles Hammond et al. |
Suspensions
|
20 Feb 2009 |
| T0900061-v1 |
Collection of Reports on Barkhausen Noise |
Rainer Weiss |
Basic R&D
Suspensions
|
14 Feb 2009 |
| D0900007-v1 |
Base Shim for 40-m Tip-Tilt Assy |
Michael Meyer |
Suspensions
|
03 Feb 2009 |
| D020475-v1 |
SUS SMALLTRIPLE 2x2ARRARY (ECD) 2x2copperarray |
Calum Torrie |
Suspensions
Basic R&D
|
23 Jan 2009 |
| D030735-v1 |
SUS_SMALLTRIPLE_2x2ARRARY_ECD_MACHINED HEX IN SHCS_SUB-ASSEMBLY |
Calum Torrie |
Suspensions
Basic R&D
|
23 Jan 2009 |
| E0900004-x0 |
DCN Passive Tip-Tilt Base Shim for 40-M Lab |
Michael Meyer |
Suspensions
|
15 Jan 2009 |
| L0810022-v1 |
epoxy resin for Violin Mode (VM) dampers |
Dennis Coyne |
Letters
Final Design
Suspensions
|
16 Dec 2008 |