UK UIM Coil Driver Pre-Production Prototype Bench Test and Evaluation

Document #:

LIGO-T0900014-v2

Document type:

T - Technical notes

Abstract:

This report documents the bench test results and evaluation of the AdL Suspension UIM Driver Pre-production Prototype chassis supplied by the University of Birmingham. Bench tests were conducted in accordance with LIGO document number T080021-v2, “UK UIM Driver Pre-Production Test Plan”. A link to the completed test plan with results is included in Appendix A of this document. The design requirements for the UIM Driver can be found in LIGO document number T060067-00-C, “AdL Quad Suspension UK Coil Driver Design Requirements”.

Files in Document:

• UK UIM Coil Driver Pre-Production Prototype Bench Test and Evaluation (T0900014-v2.pdf, 365.0 kB)

Other Files:

• Scanned copy of the completed test results for the UIM PP chassis (CompletedUIM_PP_TestPlan.pdf, 2.8 MB)

Topics:

• System Test
• Suspensions

Authors:

• Jay Heefner
• Todd Etzel

Notes and Changes:

Removed sentence in section 4.1.4.2 that was in error. The noise monitor circuit DOES NOT need to be redesigned.