Optimal light beams and mirror shapes for future LIGO interferometers

Document #:

LIGO-P080060-x0

Document type:

P - Publications

Abstract:

We report the results of a recent search for the lowest value of thermal noise that can be achieved in LIGO by changing the shape of mirrors, while fixing the mirror radius and maintaining a low diffractional loss. The result of this minimization is a beam with thermal noise a factor of 2.32 (in power) lower than previously considered Mesa Beams and a factor of 5.45 (in power) lower than the Gaussian beams employed in the current baseline design. Mirrors that confine these beams have been found to be roughly conical in shape, with an average slope approximately equal to the mirror radius divided by arm length, and with mild corrections varying at the Fresnel scale. Such a mirror system, if built, would impact the sensitivity of LIGO, increasing the event rate of observing gravitational waves in the frequency range of maximum sensitivity roughly by a factor of 3 compared to an Advanced LIGO using Mesa beams (assuming all other noises remain unchanged). We discuss the resulting beam and mirror properties and study requirements on mirror tilt, displacement, and figure error, in order for this beam to be used in LIGO detectors.

Files in Document:

• P080060-00.pdf (552.6 kB)

Other Files:

• P080060-P.pdf (954.0 kB)

Topics:

• Public relations
• Document Migration from the old DCC

Authors:

• Yanbei Chen
• Mihai Bondarescu
• Oleg Kogan

Notes and Changes:

Rev P080060-00-Z:
- Full document number: LIGO-P080060-00-Z
- Author(s): Mihai Bondarescu; Oleg Kogan; Yanbei Chen
- Document date: 2007-07-21
- Document received date: 2008-05-28
- Document entry date: 2008-05-28

Journal References:

Published in Phys Rev D vol. 78 pg. 082002 (9pp).