aLIGO bow-tie Pre-Modecleaner document

Document #:

LIGO-T0900616-v3

Document type:

T - Technical notes

Abstract:

This document was prepared in the design phase of the new Pre-Modecleaner (PMC) for Advanced LIGO. The current version is updated after building all aLIGO PMCs. A list of assumptions and calculations including the values for the simulation of the PMC can be found. Furthermore a prototype PMC was built and tested. The comparison with the design parameters shows that the properties of this prototype are in accordance with the parameters and tolerances that were calculated.

Files in Document:

• aLIGO bow-tie Pre-Modecleaner document (aLIGOpmc_v3.pdf, 202.0 kB)

Topics:

• Final Design
• Laser Systems

Authors:

• Jan Poeld

Keywords:

PMC Pre-Modecleaner PSL

Notes and Changes:

* changed drawings
* added links to recent DCC-documents
* updated section gluing procedure

Referenced by:

• LIGO-T1500492-v1: Information regarding the two failed PSL Pre-mode cleaners (PMC's) at LLO
• LIGO-T0900649-v4: PSL Final Design Document
• LIGO-E1200491: aLIGO, PSL, Pre-Modecleaner (PMC)