BSC-ISI Stage 0 Monolithic Half Bottom

Document #:

LIGO-D0900894-v2

Document type:

D - Drawings

Abstract:

BSC-ISI Stage 0 Monolithic Half Bottom

Files in Document:

• D0900894-v2.PDF (3.2 MB)

Other Files:

• D0900894-v2 (STEP).zip (2.6 MB)
• D0900894-v2 (SolidWorks Part).zip (6.2 MB)

ICS/JIRA Record:

• ICS_LINK

Topics:

• Final Design
• Seismic Isolation

Authors:

• Celine Ramet

Keywords:

BSC-ISI

Notes and Changes:

See DCN for changes since v1 release.

************
[the following is an email exchange with a machine shop (A. Stein):

//LIGO'S ANSWER...
Sent: Monday, June 28, 2010 4:02 PM

As for the 2 questions you asked, here are our answers:

1) Yes, it's OK to reduce the internal edge radii from .250" to .125", for those 4 plates.

Thanks,
Andy//

//SHOP'S QUESTION...
Sent: Monday, June 28, 2010 1:06 PM
To: Andy Stein

Andy,
...

1) Radius change request, from .250 to .125...
On the BSC large plates (D0900894, 895, D0901516, & 517) is it going to be acceptable to leave a .125 radius in the bottom of the light weighting pockets?//]

Referenced by:

• LIGO-D0900896-v1: aLIGO BSC-ISI, Stage 0 Assembly
• LIGO-G0900457-v1: Adv LIGO BSC-ISI Stage 0 Design Review