ISCT1 Duct holes positions

Document #:

LIGO-D1201456-v2

Document type:

D - Drawings

Abstract:

This diagram shows the location of the holes that allow the laser beams to enter the ISCT1 table through the lower HAM1 viewports.

Files in Document:

• ISCT1_holes.pdf (36.1 kB)

Other Files:

• zipped omnigraffle file (ISCT1_holes.graffle.zip, 196.9 kB)

ICS/JIRA Record:

• ICS_LINK

Topics:

• Installation

Authors:

• Alberto Stochino
• Kiwamu Izumi

Keywords:

HAM1 ISCT1 optical table duct pipe ISC

Notes and Changes:

The beam heights from the ground were corrected based on a tape measurement at LHO. Additionally the hole locations are slightly shifted to avoid interference with the existing screws on the panels. The dimension of the flanges were also updated: the inner diameter = 10" and outer diameter = 13".

Referenced by:

• LIGO-E1200158: aLIGO, ISC, ISCT1