BOSEM Adjustment Mechanism Cam

Document #:

LIGO-D1900350-v7

Document type:

D - Drawings

Abstract:

BOSEM Adjustment Mechanism Cam.

Files in Document:

• D1900350-v7 BOSEM ADJUSTMENT MECHANISM CAM.pdf (81.1 kB)

Other Files:

• D1900350-v7 BOSEM ADJUSTMENT MECHANISM CAM.STEP (88.8 kB)

ICS/JIRA Record:

• ICS_LINK

Topics:

• A+ Project

Author Groups:

• LSC

Keywords:

BOSEM Beamsplitter A+ Cam

Notes and Changes:

v7:
- Updated by CIT. Added note 11 which specifies the type of aluminum bronze recommended in LIGO L2000279.

v6:
- ? Updated by RAL. Potential changes not documented. Version purchased for O5 BBSS and HRTS. Missing the material call-out recommended in L2000279, that was added in v3.

v5:
- ? Updated by RAL. Potential changes not documented. Only STEP file uploaded.

v4:
- ? Updated by RAL. Potential changes not documented.

v3:
- Changed material call-out from: Aluminum Bronze, to: Aluminum bronze C95400 ASTM B505 Continuous Cast Bar Stock, Nominal composition Cu-83, Al-10.8, Fe-4, Mg, 0.5, Ni-Co-1.5

v2:
- Section A-A:
6 dia.: added c’bore symbol.
Removed datum references from Cilindricity tolerance.
Dimensioned c’bore depth from datum A instead of top surface.
H9 +/- tolerances, added parenthesis for reference.
- Left side view:
Changed datum C from axis to diametral feature of part.
e9 +/- tolerances, added parenthesis for reference.
- Back side view:
e9 +/- tolerances, added parenthesis for reference.

v1:
- Initial release for HDS application.

Referenced by:

• LIGO-D1900348-v1: BOSEM Adjustment Mechanism Assembly