LIGO Document E1100826-x0

DCN - HLTS Sapphire Prism Placement Fixture Revisions

Document #:
LIGO-E1100826-x0
Document type:
E - Engineering documents
Abstract:
This is a DCN for revised part and assembly drawings of the HLTS Sapphire Prism Placement Fixture.
Files in Document:
None
Authors:
Notes and Changes:
D0902459-v2: Redesigned to eliminate micrometers and spring plungers.
D0902658-v2: Added large hole in base plate for prism clearance.
D0902460-v2: Added large hole in base plate for prism clearance.
D0902461-v2: Revised notes (use LIGO metal parts spec., etc.).
D0902661-v2: Redesigned to eliminate micrometers and spring plungers.
D0902662-v2: Redesigned to eliminate micrometers and spring plungers.
D0902665-v2: Widened part for better access and moved and added grooves to improve location of fixture around glass optic.
D0902666-v2: Replaced 1/4-20 hole for spring plunger and 3/8-40 holes for micrometers with 1/4-20 helicoil holes for stop screws.
D080409-v2: Revised notes (use LIGO metal parts spec., etc.).
D0902721-v2: Revised notes (use LIGO metal parts spec., etc.).
D0902669-v2: Made longer to accomodate wider fixture.
D1101648-v1: Initial release.
D0902663-v2: Added locating groove; replaced rounded-end SHCS with oval point set screw.
D0902664-v2: Added locating groove; changed #2-56 hole for rounded-end screw to #4-40 hole for oval point set screw.
D0902722-v2: Added notes, changed finish to 63 microinches Ra.
D1101780-v1: Initial release.
D1101779-v1: Initial release.

DCC Version 3.5.0, contact DCC Help