LIGO Document E1300017-v3

First Contact Spray Application Procedure

Document #:
LIGO-E1300017-v3
Document type:
E - Engineering documents
Other Versions:
LIGO-E1300017-v8
12 Aug 2021, 09:23
LIGO-E1300017-v7
12 Aug 2021, 09:00
LIGO-E1300017-v5
27 Aug 2015, 11:29
Abstract:
This is the recommended way to apply first contact to suspended optics(HXTS and QUAD optics) in chamber. Watch the bolt on cone assembly video, G1300049, before using for the first time.

== Invention Disclosure & Patent Pending ==
1) LIGO-T1300041: Invention Disclosure - Protective Device and Method for Precision Application of Cleaning Polymer to Optics in a Cleanroom
2) One can look up the status of our patent on the US Patent and Trademark’s PAIR website.
http://portal.uspto.gov/pair/PublicPair using Publication number 20140196748
3) (OR) the Google patents link to the pending application is here: https://www.google.com/patents/US20140196748?dq=14/150421&hl=en&sa=X&ei=82EGVNeoJIO7ogTm84HgBg&ved=0CB0Q6AEwAA

Keywords:
spray first contact
Notes and Changes:
Compatibility of First Contact and Common Solvents:
The clear and red polymer solvents and their thinners ARE NOT compatible, do not mix them together in wet or dry form.
Isopropanol and Methanol ARE NOT compatible with first contact, do not mix them in wet OR dry form.
Acetone IS compatible with first contact and can be used to clean up dry FC or FC brushes.

Alignment layer:
As of 01/15/14 optics will not be shipped to the sites with an alignment layer in place. The alignment layer section of this E1300017-v3, Sec. 5, will still be included for now for operators who have received optics prior to 01/15/14. Refer to LIGO-E1300142: DCN, General Optics Cleaning Procedure for full details.

Referenced by:

DCC Version 3.5.0, contact DCC Help