HAM6 Alignment procedure

Document #:

LIGO-T1400588-v1

Document type:

T - Technical notes

Abstract:

This document describes alignment procedure of HAM6 optics based on our experience at LLO and LHO.

Files in Document:

• HAM6_alignment.pdf (1022.1 kB)

Other Files:

• HAM6_alignment.zip (2.3 MB)

Topics:

• Installation
• Sensing and Control

Authors:

• Koji Arai
• Suresh Doravari
• Valery Frolov
• Daniel Hoak
• Keita Kawabe
• William Korth
• Alexa N Staley

Keywords:

HAM6 alignment procedure

Notes and Changes:

Laser Safety: Any personnel who will be working on or near the HAM6 Optics Table shall first be authorized by the local Laser Safety Officer, by training and discussion regarding setup and task, and follow the requirements detailed in LIGO-M960001, LIGO Lab Laser Safety Plan, and any site specific laser safety requirements that pertain to the work performed. The wearing of laser safety goggles and any other required personal protection equipment shall be strictly followed, as well as any special safety design/setup that prevents injury or property damages.

Referenced by:

• LIGO-E1200164: aLIGO, ISC, HAM6