LIGO Document D1002201-v2
Home
Recent Changes
Topics
Login
aLIGO ERM Prism bonding jig
Document #:
LIGO-D1002201-v2
Document type:
D - Drawings
Other Versions:
LIGO-D1002201-v1
21 Oct 2010, 08:43
Abstract:
This document contains the drawing and e-drawing of version v1 of the prism bonding jig for the ERM.
Files in Document:
D1002201-v2_aLIGO_ERM_PRISM_BONDING_JIG.pdf
(177.0 kB)
Other Files:
D1002201-v2_aLIGO_ERM_PRISM_BONDING_JIG.EASM
(594.4 kB)
ICS/JIRA Record:
ICS_LINK
Topics:
Suspensions
Installation
Authors:
Marielle van Veggel
Russell Jones
Michael Meyer
Liam Cunningham
Notes and Changes:
v1: for review.
v2: changes to micrometer and spring plunger contact locations. Material cleared away from near prism holder to improve access. ERM ESD pattern confirmed as
D060189-v4
(R.JONES, 23/11/10))
Related Documents:
LIGO-D1002202:
aLIGO ERM Prism bonding fixture
LIGO-D1002203:
aLIGO ERM Prism bonding baseplate
LIGO-D1002288:
aLIGO ERM prism bonding support cylinder
LIGO-D1002145:
aLIGO TCP/ERM Prism holder assembly
LIGO-D1002146:
aLIGO TCP/ERM Prism holder
LIGO-D1002289:
aLIGO TCP/ERM Prism holder alignment screw
LIGO-D1002290:
aLIGO TCP/ERM Prism holder alignment bush
LIGO-D1002291:
aLIGO TCP/ERM Prism holder fixing screw
Referenced by:
LIGO-E1000752-v5:
Preparation of a thermal compensation plate (TCP) or end reaction mass (ERM) (Gluing wire break-off prisms and earthquake stops)
Home
Recent Changes
Topics
Login
DCC
Version 3.5.0
, contact
DCC Help