General Optics Cleaning Procedure

Document #:

LIGO-E1100439-v6

Document type:

E - Engineering documents

Abstract:

There are many different optics that make up the LIGO interferometer. All of them require different degrees of cleaning and care depending on their purpose in the system. This document defines each optic by subsystem and optic type, and provides the correct procedures for handling and cleaning each optic.

Compatibility of First Contact and Common Solvents:
The clear and red polymer solvents and their thinners ARE NOT compatible, do not mix them together in wet or dry form.
Isopropanol and Methanol ARE NOT compatible with first contact, do not mix them in wet OR dry form.
Acetone IS compatible with first contact and can be used to clean up dry FC or FC brushes.

Files in Document:

• E1100439-v6 General Optics Cleaning Procedure.pdf (412.3 kB)

Other Files:

• E1100439-v6 General Optics Cleaning Procedure.docx (161.1 kB)

Topics:

• Core Optics
• Auxiliary Optics
• System Engineering
• Input Optics
• Cleaning

Authors:

• Margot Hennig

Keywords:

general optics cleaning procedure

Notes and Changes:

Version 6 has been updated to reflect the spray application of first contact as the accepted procedure for suspended optics, and updated references to the currently accepted optics cleaning requirements. (As of 2/21/13)

Related Documents:

• LIGO-E1300017: First Contact Spray Application & Removal Procedure
• LIGO-E1000079: First Contact Brush and Pour Application Procedure
• LIGO-T1100286: Methanol Spray Optic Cleaning Procedure
• LIGO-T2000526: Damage test Ink and First Contact

Referenced by: